• Journal of the Korean Home Economics Association
• /
• v.42 no.8
• /
• pp.113-121
• /
• 2004

This study used cupric sulfate as a bum-out agent. The concentration of cupric sulfate, temperature and time were varied with glycerin included or excluded on the properties of polyester ground fabrics. The results are as follows. The effect of carbonization with glycerin included was decreased, but removal of carbide with glycerin included was easier than that with glycerin excluded. The white index and tensile strength of polyester ground fabrics were decreased as the processing concentration, temperature and time increased. The shrinkage was increased as the processing concentration, temperature and time increased. The optimum conditions with cupric sulfate as the bum-out agent was 5％ concentration, 140$^{\circ}C$, 3min., and 3kgf/cm$^2$ and with cupric sulfate added to glycerin was 5％ concentration, 150$^{\circ}C$, 5min., and 3kgf/cm$^2$.

• Journal of Korean Society for Atmospheric Environment
• /
• v.10 no.2
• /
• pp.83-89
• /
• 1994

The reaction of sulfur dioxide with cupric oxide was investigated over a temperature range of 300-50$0^{\circ}C$, and the regenaration reaction was studied using cupric sulfate and hydrogen over a temperature range of 240-35$0^{\circ}C$ in a fixed bed reactor. The experimental results showed that the efficiencies for elimination and regenaration reactions were maximum at 45$0^{\circ}C$ and at 30$0^{\circ}C$ respectively. In both cases the experimental data could be interpreted properly by shrinking unreacted core model while the chemical reaction is rate controlling step. The reaction rate constants were determined to be 24.88 exp(-6724/RT) (cm/min) for elimination reaction, and 0.0165 exp(-2047/RT)(cm/min ) for regeneration reaction.

• Restorative Dentistry and Endodontics
• /
• v.18 no.2
• /
• pp.423-430
• /
• 1993

The purpose of this study was to investigate the effect of ferric and ferric ions contained in phosphoric acid solution as a pretreatment solution on bonding of MMA/TBBO resin to dentin. Each of 1 % and 3 % ferric chloride. cupric chloride. cupric sulfate. and cupric nitrate was mixed into 10% phosphoric acid solution and pretreated dentin surface of bovine anterior teeth for 30 seconds followed- by water rinse and dry. Tensile bond strength was determined after bonding of pretreated dentin with MMA/TBBO resin by use of brush-on ;technique and storing for 24 hours in 3it distilled water. The amount of cupric ions adsorbed on pretreated dentin surface was detected by Wave-Dispersion X-ray microanalyzer for different groups of each pretreatment solution containing cupric salts. The pretreatment with cupric ions contained in 10% phosphoric acid solution was effective to increase bonding strength of MMA/TBBO resin to dentin but not in case of ferric ions. The pretreatment with 3 % cupric chloride and cupric nitrate both enhanced significant increase in bonding strength compared to the control group of 10% phosphoric acid solution(p<0.05). Cupric ions measured in pretreated dentin surface was higher in 3 % cupric chloride group than in 1% cupric chloride group, but couldn't find distinct relationship from the results of this experiment between the amount of adsorbed cupric ions according to the kind of cupric salts and the bonding strength value.

• Journal of Ocean Engineering and Technology
• /
• v.13 no.1 s.31
• /
• pp.121-129
• /
• 1999

Double-diffusive convection with verical temperature and concentration gradients in thermally stratified fluids has been investigated experimentally using an electrochemical technique. Cupric sulfuric-sulffuric acid solution confined between two horizontal copper electrodes was used. The change of thermal and solutal buoyance has no influence on the range of voltage for the limiting current. Due to Soret effect, the onset time of natural convection is delayed as the stabilizing thermal buoyancy decreases. Also it is found that the shrinkage of the unstabilizing solutal buoyancy makes the onset of natural convection retard. Multi-layered convective phenomena do not appear because cupric sulfate-sulfuric acid solution is thermally stratified, and heat diffuses faster than cupric sulfate solfate solution.

• Textile Coloration and Finishing
• /
• v.17 no.1
• /
• pp.1-6
• /
• 2005

This study were carried out to investigate the effects of mordants and mordanting methods under the various dyeing conditions such as temperature, time, pH, repetition of dyeing in the silk fabrics with Petasites japonicus leaf. It was the most high K/S values of the silk fabrics dyed with Petasites japonicus leaf according to co mordanting and used cupric sulfate, ferric sulfate as mordanting agents. K/S values of the silk fabrics dyed with Petasites japonicus leaf were increased gradually with dyeing temperature, dyeing time, repetition of dyeing was higher and the optimum pH was pH 7. Silk fabrics were colored yellowish orange and surface color(munsell value) was changed from 8.3YR to 2.0Y by using mordanting agents and those of the silk showed high tone when mordanting with cupric sulfate but decolored and darked when mordanting with ferric sulfate. Washing fastness of silk fabrics were good in 4 ～ 5 grade, so washing fastness of the silk fabrics was significantly improved when washed with the neutral detergent.

• Journal of Environmental Science International
• /
• v.17 no.9
• /
• pp.981-992
• /
• 2008

This study examined how to produce new methods of copper (II) sulfate crystallization by using a small-scale chemistry tool such as small-scale reaction surface and petri dish. The making of copper(II) sulfate is included in the 5th grade elementary science textbooks. Various copper(II) compounds were reacted with a 2 M sulfuric acid solution. The result of this study is as follows: Seven small amounts of copper(II) compounds were reacted with a few drops of 2 M sulfuric acid solution at room temperature to make a copper(II) sulfate crystal of triclinic shape. Using the petri dish method, a copper(II) sulfate crystal could be identified within one hour of reacting copper(II) hydroxide, copper(II) carbonate, copper(II) nitrate, copper(II) perchlorate, cupric(II) formate from a few drops of 2 M sulfuric acid solution at room temperature. When using the lap top method for copper(II) perchlorate, cupric formate, a proper crystal could be identified within one hour as well. SSC methods were used for the first time to make a copper sulfate crystal via chemical reaction. We can make a copper(II) sulfate crystal using a simple method which is easier, safer and saves time in class. And since a small quantity of chemicals are being used in SSC chemical methods, waste is greatly reduced. This lessens the amount of environmental problems caused by the experiment. This can be helpful in preserving nature. In addition the cost of chemical and laboratory equipment is greatly reduced because it uses material that we find in our daily lives. There will be continued study of small-scale methods such as improvement of new programs, study and training of teachers, and securing SSC tools. I would like to suggest such as SSC methods are applicable in elementary School Science. I would like it to become a wide spread program.

• Journal of the Korean Society of Safety
• /
• v.1 no.1
• /
• pp.27-32
• /
• 1986

To remove sulfur dioxide from flue gas by the method of metal oxide, copper powder of average diameter $2.4\mu\textrm{m}$and $51\mu\textrm{m}$ were used in a fixed bed reactor over a, temperature range of $300^{\circ}C-500^{\circ}C$. Copper oxide reacts with sulfur dioxide producing cupric sulfate and it can be regenerated from the latter by using hydrogen or methane. Experimental results showed that the reaction rate was increased by the increase of reaction temperature in the range of $300^{\circ}C-422^{\circ}C$ and the removal efficiency of sulfur dioxide was high in case of small size copper particle. However the removal efficiency was decreased at higher temperature due to decomposition of cupric sulfate. The rate controlling step of this reaction was chemical reaction and deactivating catalysts model can be applied to this reaction. The rate constants for this reaction and deactivation are as follows ： k＝8,367exp(-10,298/RT) Kd＝2.23exp(-8,485/RT)

• Archives of Pharmacal Research
• /
• v.11 no.2
• /
• pp.81-86
• /
• 1988

The transfer of cupric sulfate across the rat small intestine in vitro was studied by perfusion method using the segments of everted rat small intestine. Copper transport was approximately propotional to the metal concentration in the mucosal solution and no difference was observed in the metal transport among rat duodenum, jejunum and ileum. It was suggested from these results that copper transport across the rat small intestine would occur by passive diffusion. The effect of various chelating agents on copper transport across the rat small intestine n vitro and its uptake by the intestine were also studied. Copper transport was greatly enhanced in the presence of EDTA and NTA. Copper uptake decreased to a greater extent in the presence of EPTA and NTA.

• Proceedings of the PSK Conference
• /
• 2001.04a
• /
• pp.172.2-172.2
• /
• 2001

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.6
• /
• pp.757-761
• /
• 2010

This study was conducted to assess the effects of organic and inorganic copper on performance in growing pigs. A total of 100 pigs, average age 63 d and initial body weight 21.46${\pm}$1.13 kg, were assigned to five treatment groups. Dietary treatments included i) CON (basal diet, 0 ppm Cu), ii) T1 (basal diet with 67 ppm Cu as cupric sulfate, $CuSO_4$), iii) T2 (basal diet with 134 ppm Cu as $CuSO_4$), iv) T3 (basal diet with 67 ppm Cu as cupric methionate, CuMet) and v) T4 (basal diet with 134 ppm Cu as CuMet). Throughout the entire experimental period, ADG (average daily gain), ADFI (average daily feed intake) and G/F (gain: feed) ratios showed no significant differences. The dry matter digestibility was improved in the T1, T2, T3, and T4 treatments (p<0.05), as compared with CON. Nitrogen digestibility was improved in the T3 treatment group as compared with CON (p<0.05). As compared with the T1 treatment group, fecal pH values were improved in the CON, T3, and T4 treatment groups (p<0.05). Fecal Cu concentrations were significantly lower in the CON, T3, and T4 treatment groups than in T1 and T2 (p<0.05). The incidence of diarrhea was reduced when the pigs were fed on the T2, T3, and T4 diets as compared with CON. In conclusion, diets supplemented with 67 or 134 ppm Cu as CuMet may prove effective in improving nutrient digestibility and fecal pH value in growing pigs, and fecal Cu concentrations may be reduced by CuMet supplementation.