• 공업화학
• /
• 제29권2호
• /
• pp.248-251
• /
• 2018

고정층 반응기와 파이롤라이저-가스크로마토그래피/질량분석기를 이용하여 커피 잔류물이 함유된 폐종이컵의 열분해 및 촉매 열분해를 진행하였다. 커피 잔류물이 함유된 종이컵의 무촉매 열분해에서는 많은 양의 오일이 가스 및 촤와 함께 형성되었다. HZSM-5와 HY 촉매의 사용에 따른 추가적인 분해 반응에 의해 오일의 양은 줄고 가스의 양은 증가하였다. HZSM-5와 HY의 산촉매 특성 때문에 커피 잔류물이 함유된 종이컵의 촉매 파이롤라이저-가스크로마토그래피/질량분석기 분석은 생성오일 중 방향족 화합물의 선택도를 증가시켰다. HY보다 강한 산세기와 중간 기공을 가진 HZSM-5의 특성으로 인해, HZSM-5상에서 커피 잔류물이 함유된 종이컵을 촉매 열분해한 경우 HY를 사용한 경우보다 휠씬 더 많은 양의 방향족 화합물이 생성되었다.

• 한국포장학회지
• /
• 제11권1호
• /
• pp.17-24
• /
• 2005

During handling unitized products, they are subjected to a variety environmental hazards. Shock and vibration hazards are generally considered the most damaging of the environmental hazards on a product, and it may encounter while passing through the distribution environment. A major cause of shock damage to products is drops during manual handling. The increasing use of unitization on pallets has been resulted in a reduction in the manual handling of products and with it a reduction in the shock hazards. This has caused and increasing interest in research focused on vibration caused damage. the use of pallets as a base for unitizing loads, aids in the mechanical handling, transportation and storage of products. Besides aiding in the handling, transportation and storage of products, a pallet also acts on and interface between the packaged goods and the distribution environment. The determination of the impact deformation of the cushioning materials such as tray cup (polymeric foam) and corrugated fiberboard pad must be carried out to design the proper packaging system providing adequate protection for the fruit, and to understand the complex interaction between the components of fruit when they relate to expected transportation vibration inputs. In this study, the theoretical analysis of impact deformation for cushioning materials by dynamic vibration. The impact deformations of SW and DW corrugated fiberboard pad in acceleration amplitudes of 0.25 G-rms and 0.5 G-rms that were usually generated in transport vehicles during distribution environments were very small compare with the thickness of corrugated fiberboard pad. The maximum of vibration acceleration level of tray cup by vibration impact was about 3.2 G-rms. The theoretical allowable acceleration (G-factor) of the pear was 0.7102 G-rms, and the maximum dynamic deformation estimated within G-factor was about 1 mm.

• 한국산학기술학회논문지
• /
• 제18권3호
• /
• pp.320-326
• /
• 2017

다단 딥드로잉 기술은 제품의 생산성 향상과 비용 절감을 위해 휴대폰 배터리 케이스 제품의 생산 공정으로 많이 사용하고 있다. 휴대폰 배터리 케이스는 용량과 강성을 목적으로 세장비가 큰 사각 컵 형상으로 제조된다. 사각 컵 형상의 다단 딥드로잉은 세장비가 크고, 복잡한 변형 형태 메커니즘으로 인한 제품의 좌우 높이 차이가 발생한다. 이로 인해 제품 조립과 표면 품질에 문제가 발생한다. 본 연구에서는 이러한 문제를 개선하기 위해 제품의 높이 차이가 최소가 되는 블랭크 형상에 대해 연구했다. 제품 좌우 높이 차이가 최소가 되는 블랭크 형상을 찾기 위해 최적 설계와 해석을 수행했다. 타원형 블랭크의 장변과 단변을 설계 변수로 설정하고, 목적 함수는 높이 차이가 최소가 되도록, 제품의 두께 감소율이 목표 범위에 도달하도록 설정했다. 또한 최종 제품 형상의 높이를 구속 조건으로 설정하였다. 그 결과 최적 설계를 통한 초기 블랭크 설계로 높이 차이가 최소가 되었으며, 원하는 공정을 지정하여 높이 차이가 최소화 되도록 수행 가능하다. 향후 개발된 자동화 프로세스로 인해 모든 각형 타입의 초기 소재 설계가 가능할 것으로 판단된다.

• 한국정밀공학회지
• /
• 제18권9호
• /
• pp.186-191
• /
• 2001

Spinning process is a chipless metal forming method for axi-symmetric parts, which is more economical, efficient and versatile method for producing parts than the other sheet metal forming process such as stamping or deep drawing. In this study, a fundamental experiment was conducted to improve productivity with process parameters such as tool path, angle of roller holder($\alpha$), feed rate($\gamma$) and corner radius of forming roller(Rr). These factors were selected as variables in the experiment because they were most likely expected to hale an effect on spring back. The empirical results were analyzed to know how much spring back was affected by these factors. And also thickness and diameter distribution of a multistage cup obtained by spinning process were observed and compared with those of a commercial product produced by conventional deep drawing.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 추계학술대회 논문집
• /
• pp.195-199
• /
• 2001

The flow turning process, an incremental forming process, is a cost-effective forming method for axi-symmetric intricate parts to net shape. However, the flow turning process shows a fairly complicated deformation, it is very difficult to obtain satisfactory results. Therefore extensive experimental and analytical research has not been carried out. In this study, an fundamental experiment was conducted to improve productivity with process parameters such as tool path, angle of roller holder($\alpha$), feed rate(v ) and comer radius of forming roller(Rr). These factors were selected as variables in the experiment because they were most likely expected to have an effect on spring back. The clearance was controlled in order to achieve the precision product which is comparable to deep drawing one. And also thickness and diameter distributions of a multistage cup obtained by flow turning process were observed and compared with those of a commercial product produced by conventional deep drawing.

• Korean Journal of Mathematics
• /
• 제26권2호
• /
• pp.215-269
• /
• 2018

Orders and types of entire functions have been actively investigated by many authors. In this paper, we investigate some basic properties in connection with sum and product of relative (p, q, t) L-th order, relative (p, q, t) L-th type, and relative (p, q, t) L-th weak type of entire functions with respect to another entire function where $p,q{\in}{\mathbb{N}}$ and $t{\in}{\mathbb{N}}{\cup}\{-1,0\}$.

• 한국의류산업학회지
• /
• 제5권4호
• /
• pp.351-362
• /
• 2003

To study marketing strategy changes caused by Korea fashion industry development process, the fashion marketing strategy changes of Japan, considered as the most similar one of Korea, was compared. At each period, p! roper cost efficiency strategies, product differentiation strategies, and market segment strategies has been selected and applied. The fashion industry foundation period namely practical usage clothing period of Korea follows 10 years after one of Japan. 90's highly sensitive fashion period namely fashion industry growth period follows 5 years after one of Japan. As entering to fashion industry maturity period with global competition, the time difference falls to less than 5 years. With hosting of 2002's World-Cup, Korea's global competitiveness has increased, and it appears to be possible of being fashion market leader in East Asia and Japan's rival on an equal footing.

• 한국포장학회지
• /
• 제13권1호
• /
• pp.25-28
• /
• 2007

Physical damage on fruits and vegetables caused by shock degrades the value of product in the fresh market. In order to design a product/package system to protect the product, the peak acceleration or G force to the product that causes shock damage needs to be determined. Shock cushion packaging is applied to protect goods of all kinds. It can be adapted in their shape to any product to be packed, so that its shock absorbing properties is determined by geometry of the product. The shape of a cushion can be adapted to the expected shock loads. To analyze the response properties of cushion materials for packaging of the pears for optimum packaging design during transportation, shock tests were carried out. Shock acceleration that is happened in pears were appeared very high by $25{\sim}30G$ in the input shock acceleration of 14.1618 G that was measured in transportation road. This means that the pears receive the shock acceleration more than maximum double itself and the damage by this can happen and the shock acceleration increase in case use PE tray cup and PE net in fruits, the use of corrugated fiberboard pad may become one method that it can reduce the damage by the shock in packaging of fruits.

• 한국산학기술학회논문지
• /
• 제18권6호
• /
• pp.330-335
• /
• 2017

최근 자동차 산업에서 전기 모터 연료 전지에 대한 수요가 급증했으며, 연료 전지 케이스로 사용되는 사각형 알루미늄 캔에 대한 수요 또한 증가하고 있다. 직사각형 배터리 케이스의 바닥에 있는 에어 벤트는 비정상적으로 높은 압력이 발생할 때 미리 압력을 방출하여 큰 폭발을 방지하는 역할을 한다. 직사각형 컵 배터리 케이스는 6 단계의 다단계 딥 드로잉으로 외형을 만들고 직사각형 배터리 케이스와 용접하여 벤트 부품을 제작해왔다. 그러나 본 연구에서는 직사각형 케이스의 바닥면에 공기 벤트 형상을 직접 추가 하는 연구를 수행하였다. 단조의 초기 형상으로는 사각 컵 다단식 딥 드로잉 성형 해석에서 추출한 두께와 형상을 이용한 유한 요소 해석 기법을 사용 하였다. 그 결과, 예측 정밀도가 향상되고, 배부름 및 파단 등의 결함을 미리 예측할 수 있었다. 초기 분석 결과를 토대로 두 가지 단조 형상이 후보로 제시되었고 성형 해석을 통해 최적의 단조 형상을 결정 하였다. 이러한 결과를 바탕으로 금형을 제작하고 실제 결과와 분석 결과를 비교하여 본 연구의 타당성을 검증하였다.

• 펄프종이기술
• /
• 제36권1호
• /
• pp.49-60
• /
• 2004

Life Cycle Assessment for the pulp, which is mainly used as the raw material of fine paper, base paper for food packaging and paper cup, has been carried out in this study to consider environmental aspects by quantifying the environmental emission and to evaluate its environmental impact potential. The system boundary was selected from cradle to gate stage(raw material acquisition, transportation of raw material and product manufacturing) of the product. Environmental impact was divided into 8 categories considering Korean situation: abiotic resource depletion, global warming, ozone depletion, acidification, eutrophication, photochemical oxidant creation, ecotoxicity and human toxicity. In Life Cycle Impact Assessment(LCIA) methodology phase, Ecopoint, Eco-indicator 95 and Korean eco-indicator were used and the results carried out by each methodology were compared. The results from this study were also compared with those of foreign study to verify the reliability of the results. The results of the study could be utilized as the basic data for Environmental Management System(EMS), Design for Environment(DfE) and Type III eco-labeling in the paper and paper-related industry.