• 제목/요약/키워드: cup capacity

검색결과 18건 처리시간 0.022초

오스테나이트계 AISI304 스테인레스강판의 프레스 성형특성 (Press Formability of Austenitic AISI304 Stainless Steel)

  • 남재복;류도열;김영석
    • 소성∙가공
    • /
    • 제3권1호
    • /
    • pp.38-50
    • /
    • 1994
  • Fundamental deformation mechanism and plastic behavior of AISI304 austenitic stainless steel were investigated to evaluate press formability. Local and uniform deformation capacity of AISI304 steel were compared to those of ferritic AISI430 steel and Al killed low carbon steel. Nine kinds of austenitic stainless steels having different austenite stabilities were made in laboratory scale to examine the transformation behavior in various deformation mode and variation of mechanical properties. Deformation path and strain distributions along edge corner of commercial sink die were illustrated and effect of austenite stability on press forming of sink die was clarified with experiments using square cup drawing tools.

  • PDF

타액검사기의 신뢰도 평가 (Evaluation of the Reliability of Salivary Testing Instrument)

  • 한금아;이준행
    • 대한소아치과학회지
    • /
    • 제45권3호
    • /
    • pp.363-369
    • /
    • 2018
  • 타액검사기는 방법이 간단하고 단시간 내에 검사를 할 수 있는 장점이 있다. 하지만 타액 채취가 용이하고 장치의 사용이 간단하나 그 결과의 신뢰성에 영향을 미치는 요인에 대해서는 검증해 볼 필요가 있다. 이번 연구는 타액검사기의 측정 결과에 영향을 미칠 수 있는 요인 중 외부변수인 시간적 요인을 분석하기 위해 측정 시간에 따른 검사 결과의 차이를 비교하였다. 또한 내부변수를 파악하기 위해 타액검사기 측정값 사이의 관련성을 분석하였다. 나이, 성별, 질환의 유무에 상관없이 무작위적으로 선정한 20명의 사람들을 대상으로 하여 타액을 채취하였다. 평균 나이는 46.6세였고, 남자 10명, 여자 10명이었다. 채취한 타액을 바로 타액검사기로 측정한 것을 I군으로 하였다. 또한 채취한 타액을 종이컵에서 10분간 공기중에 방치한 후 타액검사기로 측정한 것을 III군으로 하였다. 그리고 I군으로 사용한 것을 30분 후 재 측정하여 II군으로, III군으로 사용한 것을 30분 후 재 측정한 것을 IV군으로 하였다. 실험 결과 cariogenic bacteria, acidity, buffer capacity, blood, leukocyte, protein and ammonia 중 buffer capacity만 제외하고 나머지는 모두 II, IV군에서 유의한 변화가 있었다. 또한 측정값 중 cariogenic bacteria는 leukocyte, protein과 상호관련성이 있었고 buffer capacity는 acidity, protein과, 그리고 protein은 buffer capacity, leukocyte와 연관성이 있었다. 결론적으로 외부변수인 측정 시간에 따른 측정결과 값의 차이는 각각 다르게 나타났으며, 이는 타액검사 시 시간요인의 중요성을 의미하는 것이다. 또한 내부변수인 측정값 간의 상호관계를 이용하여 임상적으로 접근할 경우 그 연관성에 대한 고려가 필요하다.

사각형 캔 드로잉 다단 공정에서 성형성과 제품형상을 동시에 고려한 초기 블랭크 형상 최적 설계 (Initial Blank Optimization Design of Square Can Multistage Drawing considering Formability and Product Shape)

  • 박상민;김동규;홍석무
    • 한국산학기술학회논문지
    • /
    • 제18권3호
    • /
    • pp.320-326
    • /
    • 2017
  • 다단 딥드로잉 기술은 제품의 생산성 향상과 비용 절감을 위해 휴대폰 배터리 케이스 제품의 생산 공정으로 많이 사용하고 있다. 휴대폰 배터리 케이스는 용량과 강성을 목적으로 세장비가 큰 사각 컵 형상으로 제조된다. 사각 컵 형상의 다단 딥드로잉은 세장비가 크고, 복잡한 변형 형태 메커니즘으로 인한 제품의 좌우 높이 차이가 발생한다. 이로 인해 제품 조립과 표면 품질에 문제가 발생한다. 본 연구에서는 이러한 문제를 개선하기 위해 제품의 높이 차이가 최소가 되는 블랭크 형상에 대해 연구했다. 제품 좌우 높이 차이가 최소가 되는 블랭크 형상을 찾기 위해 최적 설계와 해석을 수행했다. 타원형 블랭크의 장변과 단변을 설계 변수로 설정하고, 목적 함수는 높이 차이가 최소가 되도록, 제품의 두께 감소율이 목표 범위에 도달하도록 설정했다. 또한 최종 제품 형상의 높이를 구속 조건으로 설정하였다. 그 결과 최적 설계를 통한 초기 블랭크 설계로 높이 차이가 최소가 되었으며, 원하는 공정을 지정하여 높이 차이가 최소화 되도록 수행 가능하다. 향후 개발된 자동화 프로세스로 인해 모든 각형 타입의 초기 소재 설계가 가능할 것으로 판단된다.

공공 지역 특성화 펜스 디자인 시뮤레이션 -서울시 문화의 거리를 중심으로- (Public Area Characterized Fence Designing Simulation -Cultural Street in Seoul-)

  • 이대우;문대성
    • 한국가구학회지
    • /
    • 제20권4호
    • /
    • pp.307-316
    • /
    • 2009
  • Seoul, the capital of Korea, is worldwide city; Seoul is 600 year-old city as a capital and more than 10 millions of population live in Seoul, Image of Seoul has began to be known to the peoples in the world through 1988 Seoul Olympic Games and 2002 World Cup. However, in the public design and trees lining street system, Seoul hasn't been escaped from the image of a city which lacks of the characterization in the culture and identity aspects. This paper applied a protective fence designing simulation for Cultural Street in Seoul to develop much more the identity of Seoul and characterization of local culture. Also, It's examined and analyzed R&D data, and applied traditional patterns to design to set developmental capacity of design and a direction of fence design in the past, present and future. It's analyzed the present condition of domestic manufacturers and examples for installation, selected randomly 7 places of domestic cultural places as an alternative to compare the previous design to the present design with 3D design and photos composing method, and developed the related situation. Also, It's visualized this method to let the citizens and all levels of society determine the design. besides that, developed the traditional patterns to apply the patterns to the design, considering the characteristic of each region and characteristic of each road. It's suggested this fence design to apply the image of advanced Korea and Seoul as a creative cultural city, and the international status of Korea and Seoul to the trees on the historical and traditional street. Also, put an importance to bring the identity of Seoul and Korea in the world into relief.

  • PDF

둔각 물체를 이용한 엔진 나셀 화재 소화 특성 (The Characteristic of Extinguishment of Engine Nacelle Fire Using a Bluff Body)

  • 이정란;이의주
    • 한국안전학회지
    • /
    • 제27권1호
    • /
    • pp.20-25
    • /
    • 2012
  • The purpose of the study is to assess the extinguishing concentration of inert gases in engine nacelle fire. The experiment was performed with a two dimensional rectangular bluff body stabilized flames, where the fuel was ejected to counter flow and co-flow against an oxidizer stream. Two inert gases, $CO_2$ and $N_2$, were used for extinguishing agent in the oxidizer and methane was used for fuel. The main experimental parameters were the direction of injecting fuel, the kinds of agent and the velocity ratio between air and fuel streams, which controlled the mixing characteristic near bluff body and the strength of recirculation zone in the downstream. The result shows the flame structure and the mode were strongly dependent with fuel/air ratio and the fuel jet direction. For both flow configurations, the extinguishing concentration of $CO_2$ was smaller than the $N_2$ because of the large heat capacity of $CO_2$. However, the concentration of inert gasesat blowout was much smaller than those in the cup burner and coflow jet diffusion flames, which implies that the extinction mechanism of bluff body stabilized flames was mainly due to the aerodynamic aspect. Compared to co-flow fuel injection, the extinguishing concentration of inert gases under counter flow configuration was lower. The effect of direction might result from the mixing characteristic and strength of recirculation zonearound a bluff body. More details should be investigated for the characteristic of recirculation zone in the wake of bluff body using the LES(Large Eddy Simulation).

일반 수술 침대와 짧은 대퇴 주대를 이용한 인공 고관절 전 치환술의 직접 전방 도달법과 변형된 전 측방 도달법에 따른 결과 비교 (Comparison of the Outcomes after Primary Total Hip Arthroplasty Using a Short Stem between the Modified Anterolateral Approach and Direct Anterior Approach with a Standard Operation Table)

  • 박명식;윤선중;최승민;조홍만;정우철;강경록
    • 대한정형외과학회지
    • /
    • 제54권3호
    • /
    • pp.244-253
    • /
    • 2019
  • 목적: 일반 수술용 침대와 길이가 짧은 대퇴 주대(short stem)를 이용하여 인공 고관절 전 치환술을 직접 전방 도달법(direct anterior approach, DAA)을 이용하여 시행하고, 임상적 영상의학적 결과를 변형된 전 측방 도달법(modified Hardinge; anterolateral approach, ALA)을 시행한 경우와 비교하여 알아보고자 하였다. 대상 및 방법: 2013년 1월부터 2015년 11월까지 단일 술자가 DAA로 인공 고관절 전 치환술을 시행한(DAA group) 102명(102예)과 동 수의 ALA를 사용한 환자(ALA group)를 후향적으로 비교 분석하였다. 수술시간과 출혈량을 비교하였고, 수술 후 통증의 개선 정도와 보행 능력 및 고관절의 기능 회복을 알아보았다. 영상의학적으로 비구 컵과 대퇴 주대의 삽입 위치를 평가하였고, 두 군 간에 발생한 합병증을 알아보았다. 결과: 출혈량은 DAA group에서 유의하게 적었다(p=0.018). 수술 후 3주까지는 하지 근력의 회복이 DAA group에서 유의하게 높았다(굴곡/신전력 p=0.023, 외전력 p=0.031). Harris hip score를 이용한 기능 평가는 3개월까지(p≤0.001), Koval score를 이용한 보행 능력 평가는 6주까지(p≤0.001) DAA group에서 유의하게 나은 결과를 보였고, visual analogue scale score를 이용한 통증의 개선은 7일까지는 DAA group에서 유의하게 높았다(p=0.035). 비구 컵의 경사각(p≤0.001)과 전염각(p≤0.001)은 DAA group에서 ALA group보다 더 안정 범위에 위치하였고, 대퇴 주대의 위치와 하지 길이는 통계적 유의한 차이를 보이지 않았다. DAA group에서 수술 중 2예의 대전자 골절이 발생하였다(p=0.155). 결론: 길이가 짧은 대퇴 주대를 이용하여 일반 수술 침대에서 시행하는 DAA는 수술 후 조기 기능 회복을 보이며, 술자에게 친숙한 해부학적 자세로 수술 중 영상 증폭기 사용이 간편하여 원하는 위치에 인공 관절물을 삽입하는 것과 하지 부동 방지에 유용한 도달법으로 생각된다.

열결(列缺).려구에 대한 용량별 He-Ne 레이저 침 조사(照射)가 고지방(高脂肪) 식이(食餌)로 유발된 고지혈증(高脂血症) 백서(白鼠)에 미치는 영향(影響) (Effects of Invasive Low Level Laser Acupuncture Therapy(LLLAT) depending on capacity at LU7+LR5 on the Hyperlipemia Rats Induced by High Fat Diet)

  • 방상희;윤대환;조명래;임현진;나창수
    • Korean Journal of Acupuncture
    • /
    • 제23권1호
    • /
    • pp.1-14
    • /
    • 2006
  • Objectives : This research was performed to investigate the effect of invasive low level laser acupuncture therapy(LLLAT) at Yolgyol+yogu(LU7+LR5) on weight gain, food intake, food efficiency, lipid metabolism and liver function in hyperlipemia rats. Methods : Experimental groups were divided into high fat diet cup(Control group), high fat diet and 15 mW/5 min LLLAT at LU7+LR5(15 mW/5 min group), 15 mW/10 min LLLAT at LU7+LR5(15 mW/10 min group), 30 mW/5 min LLLAT at LU7+LRS(30 mW/5 min group), 30 mW/10 min LLLAT at LU7+LR5(30 mW/10 min group). LLLAT was treated at the 15,30mW-5,10min once a 2day during 5 weeks. Results : Body weight was decreased significantly in 30 mW/s min group and 30 mW/10 min group compared with control group. Food intake was decreased significantly in 15 mW/5 min group and 15 mW/10 min group compared with control group. Food efficiency was decreased significantly in 30 mW/10 min group compared with control group. In the lipid metabolism, total cholesterol, HDL-cholesterol and free fatty acid were increased significantly in 15 mW/5 min group and 30 mW/10 min group compared with control group. LDL-cholesterol was increased in 30 mW/10 min group and phospholipids was decreased significantly in all experimental group compared with control group. triglyceride was not showed significant result in all experimental group. In the liver function, AST was not showed significant result in all experimental group, ALT and ALP were increased significantly in 30 mW/10 min group, ALP was decreased in 30 mW/5 min group compared with control group. Conclusions : LLLAT at LU7 and LR5 can manage hyperlipemia by controlling body weight, food intake, food efficiency ratio and lipid metabolism.

  • PDF

『손자병법(孫子兵法)』의 응용술(應用術)을 통해 본 고전가용성(古典可用性) 고찰 (A Study of Classical Literature Interpretation in Variety and Application - With 『Sunzibingfa(孫子兵法)』 by Sunzi -)

  • 최영준;김청환
    • 동양고전연구
    • /
    • 제33호
    • /
    • pp.193-230
    • /
    • 2008
  • 서양의 편리한 과학적 지식과 사고를 응용한 발전의 바탕위에 포용적이고 상호보완적인 동양의 지혜를 화합시키고 재구성하여 시대적 변화의 당면과제로 떠오르는 여러 문제 해결의 임무를 수용하는 차원에서 고전의 번역을 응용한다. 이러한 맥락에 맞추어 본 연구 방향은 고전 중에서 "손자병법(孫子兵法)"을 활용한 고금(古今)의 지도자들을 통하여 고전의 지혜 응용과 그 가용성에 대하여 알아보고자 한다. 그리하여 앞으로 우리의 동양적 사상과 가치관이 세계의 흐름 속에서 어떠한 방향으로 나아가야 하는가하는 본보기에 힘을 실어 발전 문을 활짝 여는 작업의 한 보탬 역할을 하는 것으로 번역의 사명이 이루어지는 것이다. 이러한 의도에서 많은 고전(古典)들이 해박한 선배 학자들에 의하여 재음미 되고 해석되어서 소개되었고 또한 많은 출판물이 쏟아진 것을 익히 알고 있다. 본고에서는 고전(古典)중에서도 대중에게 친숙하게 알려진 "손자병법(孫子兵法)"을 선택하였다. 그 이유는 이 고전이 가지고 있는 사상이 동서고금(東西古今)의 지도자들에 의하여 어떻게 활용되어 왔는지를 살펴보고자 하는 것이다. 관찰하려는 지도자들은 고대(古代)는 "삼국지(三國志)"속에 등장하며 잘 알려진 조조(曹操), 제갈공명(諸葛孔明), 사마중달(司馬仲達), 이 세 지도자들과 현대(現代)에서는 축구 감독으로 "손자병법(孫子兵法)"을 애독한 2006년 독일 월드컵 당시 포르투칼의 감독이었던 스콜라리와 현대 군사 이론가인 영국의 리델하트(Liddell Hart)를 선택하였다. 여기 소개된 지도자들이 "손자병법(孫子兵法)"을 활용한 사례들을 통하여 고전(古典)이 처해진 입장에 따라 어떻게 해석되고 활용되었는가를 살펴본다. 그리하여 앞으로는 고전이 어떻게 가용되어야 하는지를 알아보는 기회를 만들어보는 뜻이 본고 기술(記述) 의도이다.