• Journal of the Korean Ceramic Society
• /
• v.47 no.3
• /
• pp.237-243
• /
• 2010

This research examines using Rice Husk Ash, $Cr_2O_3$ in producing the pink-red color. It studies the formation of cassiterite and malayaite crystallites, the primary factors in producing the pink-red color, in relation to the application of $Cr_2O_3$ to examine its coloring mechanism. In addition, the research intends to identify the optimum synthesizing temperature and maintaining time for crystallization of malayaite, a stable pink-red colorization factor in high temperature glaze during $Cr_2O_3$-$SnO_2$-CaO-$SiO_2$ family pigment synthesis. The optimum substituting contents is Rice Husk Ash : Quartz = 1 : 2, and the optimum temperature is suggested at $1300^{\circ}C$ for 2 h based on analysis results by XRD, FT-IR, Raman microscope, SEM and UV-vis.

• YAKHAK HOEJI
• /
• v.35 no.4
• /
• pp.277-282
• /
• 1991

Rheological, colloidal and micromeritical properties were followed to investigate aging mechanisms of hydrous aluminum oxide suspension using Zeta-meter systems, BET adsorption apparatus, Master sizer and electronmicroscope. The results indicate that hydrous aluminum oxide suspension revealed plastic flow with thixotropy. The viscosity, thixotropy and yield value were increased with increasing concentration. During aging process, the viscosity and thixotropic index were increased by an addition of glycerin, however, sorbitol stabilized aging process of the suspension being accompanied with growth of particle size and reduction in specific surface area, pore area and pore volume, and consistency. Diminution of adsorptive power of the particles was also protected by addition of sorbitol to hydrous aluminum oxide suspension. From these results, one of aging mechanism of hydrous aluminum oxide suspension assumed growth and/or crystallization of colloidal particles in aqueous suspension.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.50 no.1
• /
• pp.24-29
• /
• 2001

PZT thin films(4000A) have prepared onto 1737 corning glass and ITO coated glass substrates with a RF magnetron sputtering system using Pb_{1.05}(Zr_{0.52},Ti_{0.48})O_3$ceramic target, Electrical properties of PZT thin film deposited after ITO coated glass were P${\gamma}$ was decreased by 25% after 109cycles, respectively. With the RTA treatment duration and temperature increased, the crystallization of PZT thin films were enhanced, however, the leakage current density became higher. The leakage current mechanism was found to be space charge conduction by the defects and oxygen vacancies existing in PZT and PZT/bottom electrode interfaces.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2005.05a
• /
• pp.173-179
• /
• 2005

본 연구에서는 Nickel-Metal Induced Lateral crystallization(Ni-MILC)에 depart에 따른 영향을 관찰함에 있어 Nickel에 Palladium Metal을 인접시켜(Pd assisted Ni-MILC) 그 결정화 속도를 향상시키는 방법을 제안하였다. a-Si에 Phosphorous가 doping 되어 있는 경우 Ni-MILC의 성장은 intrinsic에 비해 2.5배 감소되는 반면, Boron을 doping한 경우 Ni-MILC의 성장은 intrinsic의 경우보다 5배 이상의 성장을 보이게 되는데, well type의 Pd을 인접시킨 경우 Pd에 의해 유도된 tensile stress가 각 doping에 따른 성장 속도를 더욱 증대시키는 것을 확인할 수 있었으며, 이와 같은 현상을 MILC mechanism으로 설명하였다. 이는 Ni-MILC를 이용하여 다결정 실리콘 TFT 제작 시 결정화 속도로 인하여 문제가 되었던 N-type에서의 적용이 가능함과 동시에 contact MILC 등의 방법에도 이용가능성을 의미한다.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2004.05a
• /
• pp.74-77
• /
• 2004

Porous membranes were prepared via thermally induced phase separation (TIPS) of (ethylene-co-vinyl alcohol) (EVOH)/glycerol mixtures. The liquid-liquid (L-L) phase boundaries are shifted to higher temperature when the ethylene contents in EVOH increase. Moreover, the kinetic study proved that the growth of droplets formed by the general liquid-liquid (L-L) phase separation obeyed a power-law scaling relationship in the later stage of spinodal decomposition (SD). A new phase separation mechanism was presented, in which the L-L phase separation could be resulted from the crystallization. The hollow fiber membranes were prepared. The membranes showed asymmetric structures with skin layer near the outer surface, the larger pores just below the skin layer and the smaller pores near the inner surface. The effect of ethylene content (EC) in EVOH, cooling water bath temperature and take-up speed on membrane performance was investigated.

• Biodesign
• /
• v.7 no.1
• /
• pp.24-27
• /
• 2019

Pnc1 converts nicotinamide to nicotinic acid to generate NAD⁺ through the Preiss-Handler pathway that is one of the NAD⁺-salvage pathway. By reducing levels of nicotinamide, an inhibitor of the NAD⁺-dependent histone deacetylase Sir2, yeast Pnc1 contributes gene silencing. In this study, to understand the structural features and molecular mechanism of nicotinamidase Pnc1, we overexpressed, purified, and crystallized the N-terminally His₆-tagged Pnc1 protein from Kluyveromyces lactis and obtained X-ray diffraction data at a resolution of 2.2 Å. The crystals of the K. lactis Pnc1 (KlPnc1) belonged to space group P2₁2₁2₁ with unit cell parameters a=38.5, b=77.3, c=83.3, and α=β=γ= 90°. There is one molecule in the asymmetric unit.

• Journal of Welding and Joining
• /
• v.34 no.5
• /
• pp.61-69
• /
• 2016

A numerical simulation of the solid/liquid coexistence temperature range, using solidification segregation model linked with the Kurz-Giovanola-Trivedi model, explained the mechanism of the BTR shrinkage (with an increase in welding speed) in type 310 stainless steel welds by reduction of the solid/liquid coexistence temperature range of the weld metal due to the inhibited solidification segregation of solute elements and promoted dendrite tip supercooling attributed to rapid solidification of laser beam welding. The reason why the BTR enlarged in type 316 series stainless welds could be clarified by the enhanced solidification segregation of impurity elements (S and P), corresponding to the decrement in ${\delta}-ferrite$ crystallization amount at the solidification completion stage in the laser welds. Furthermore, the greater increase in BTR with type 316-B steel was determined to be due to a larger decrease in ${\delta}-ferrite$ amount during welding solidification than with type 316-A steel. This, in turn, greatly increases the segregation of impurities, which is responsible for the greater temperature range of solid/liquid coexistence when using type 316-B steel.

• Korean Journal of Materials Research
• /
• v.4 no.8
• /
• pp.895-905
• /
• 1994

The solid phase crystallization behavior of undoped amorphous $Si_{1-x}Ge_{x}$ (X=O to 0.53) alloyfilms was studied by X-ray diffractometry(XRD) and transmission electron microscopy(TEM). Thefilms were deposited on thermally oxidized 5" (100) Si wafer by MBE(Mo1ecular Beam Epitaxy) at 300'C and annealed in the temperature range of $500^{\circ}C$ ~ $625^{\circ}C$. From XRD results, it was found that the thermal budget for full crystallization of the film is significantly reduced as the Ge concentration in thefilm is increased. In addition, the results also shows that pure amorphous Si film crystallizes with astrong (111) texture while the $Si_{1-x}Ge_{x}$ alloy film crystallzes with a (311) texture suggesting that the solidphase crystallization mechanism is changed by the incorporation of Ge. TEM analysis of the crystallized filmshow that the grain morphology of the pure Si is an elliptical and/or a dendrite shape with high density ofcrystalline defects in the grains while that of the $Si_{0.47}Ge_{0.53}$ alloy is more or less equiaxed shape with muchlower density of defects. From these results, we conclude that the crystallization mechanism changes fromtwin-assisted growth mode to random growth mode as the Ge cocentration is increased.ocentration is increased.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.27 no.1
• /
• pp.34-41
• /
• 2017

In this study, the effect on the zinc nuclei crystallization caused by changes preprocessing of the zinc crystalline glaze preparation has been studied. The mechanism of the nuclei formation in the crystalline glaze and development of the nuclei by studying the preprocessing step was explained. The preprocessing step was improved by altering mixing process of the materials prior to sintering: number of sieving dispersion process and ultra-sonication prove tests with various duration of sonication. According to the result, the sieving and sonication of the starting materials facilitated the interface reactions of $ZnO-SiO_2$ from $680^{\circ}C$ where low temperature willemite is formulated, and altered Si bonding for the easier bonding between Zn-Si. In other words, solely sieving was enough to accelerate the formation of willemite in low temperature. When the particles were distributed evenly by sonication, the willemite formation was even more significant.

• Applied Chemistry for Engineering
• /
• v.8 no.6
• /
• pp.939-944
• /
• 1997

The films of zeolite X on the surface of metal sieve were prepared by continuous crystallization method. It is known that the growth of zeolite crystal on the surface of metal is mainly dependent on the surface composition of metal sieve. In the present work, the zeolite nuclei could be easily formed as Cr content on the metal surface was removed by acid treatment. In order to investigate the proedure growing of zeolite crystal by the continuous crystallization method, the composition of zeolite X($6.36Na_2O-Al_2O_3-5.3SiO_2-190.8H_2O$)was supplied every 12hour. Then the mechanism and inter-relationship between the metal surface and nucleation are investigated. The results show that as the content of silica increases in the gel mixture, the nuclei of zeoilite are easily formed on the metal surface. Also, it was confirmed that the particle of zeolite stuck on the metal surface continues the linear growth. The particles are combined by the reaction of polycondensation, and finally become the shape of crystal. The sample synthesized by the film type was confirmed as zeolite X by the analyses of SEM and XRD.