• 한국결정성장학회지
• /
• 제19권5호
• /
• pp.242-245
• /
• 2009

종자결정을 사용하지 않고 AlN 결정을 승화법으로 성장하였으며, 결정이 성장되는 양상을 고찰하였다. AlN 결정으로 성장된 상은 다결정 상이었으며, 약 $60\sim160\;{\mu}m$의 크기를 가졌으며, $0.2\sim0.5\;{\mu}m/hr$의 성장 속도로 성장되었다. 성장된 결정구조는 AlN 결정의 결정 구조가 반영된 육방정계의 결정상으로 성장되었음을 관찰하였으며, 주상 구조(columnar structure)로 성장된 후 횡적 성장(lateral growth)하는 양상을 보이면서 대형화됨을 알 수 있었다. 성장된 결정의 표면에서는 다량의 pinhole이 관찰되었으며, 광학현미경과 SEM을 이용하여 성장 morphology의 변화과정을 고찰하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제18권2호
• /
• pp.54-63
• /
• 1994

Mg thin films were prepared on SPCC(cold-rolled steel) substrates by vasuum evapoaration and ion-plating. The influence of argon gas pressure and substrates bias voltage on the crystal orientation and morphology of the film was determined by using X-ray diffraction and scanning electron micrography (SEM), respectively. And the effect of crystal orientation and morphology of the Mg thin films on corrosion behavior was estimated by measuring the anodic polarization curves in deaerated 3% NaCl solution. The crystal orientation of the Mg films deposited at high argon gas pressure exhibited a (002) preferred orientation, regardless of the substrate bias voltage. Film morphology changed from a columnar to a granular structure with the increase of argon gas pressure. The morphology of the films depended not only on argon gas pressure but also bias voltage ; i.e., the effect of increasing bias voltage was similar to that of decreasing argon gas pressure. The influences of argon gas pressure and bias voltage were explained by applying the adsorption inhibitor theory and the sputter theory. And also, this showed that the corrosion resistance of the Mg thin films can be changed by controlling the crystal orientaton and morphology.

• 한국염색가공학회지
• /
• 제27권4호
• /
• pp.245-260
• /
• 2015

The effect of salt milling process on the crystal size, morphology, and color characteristics of C.I. Pigment Red 57:1 was studied. The primitive morphology and color properties of the pigment after synthesis were studied in the former series work. The size and morphology of primary particles and the second aggregation features should be considered because they are very important to determine pigment quality. We compared the primary morphology of pigment particles before drying with the secondary aggregated morphology of pigment particles after drying and salt milling process. Morphological properties were investigated by particle size analysis, X-ray diffraction, and scanning electron microscopy and color measurement was carried out. Significant reduction in particle size as well as enhanced crystallite size after salt milling process was observed. This result might give a difference in color of the pigment, turning into brighter and more blue-toned red color. It was revealed that synthesis condition affect the morphology and color of the pigment even after milling. Increase in HCl concentration in the synthesis process enhanced crystal size and quality forming bluer-red pigments but an increase in $CaCl_2$ concentration resulted in more amorphous crystals forming darker-red pigments after salt milling.

• 한국결정학회지
• /
• 제5권2호
• /
• pp.93-99
• /
• 1994

K2O/3MOOS/0.SBB03 융제를 사용하여 TSSG 법으로 육성한 Md:Yal3(BO3)4 (NYAB) 단결정의 결정외형 및 표면형상을 연구하였다. <100>과 <120> 종자정을 사용한 경우는 서로 다른 크기의 프리즘 면들과 (101) 면들이 발달하였고 <001> 종자정을 사용하였을 때는 (001) 면이 함께 발달하였다. 종자정의 방향이 <100>또는 <120> 일때 프리즘 면 위에 성장구룽이 많이 형성되었으나, <001> 일때는 이웃하는 (101) 면에 평행한 줄무늬가 형성 되었다. (101) 면은 이차원 핵생성에 의한 성장이 지배적이고, <001> 종지정을 사용할 때 발달하는 (001) 면은 나선형 전위에 의한 성장이 지배적이었다. 종자정의 방향은 성장외형을 변화시키고 성장외형과 결정의 질을 결정하는 중요한 성장변수로 작용하였다.

• Corrosion Science and Technology
• /
• 제3권4호
• /
• pp.148-153
• /
• 2004

Magnesium thin flims were prepared on cold-rolled steel substrates by RF magnetron sputtering technique. The influence of argon gas pressure and substrate bias voltage on their crystal orientation and morphology of the coated films were investigated by scanning electron microscopy (SEM) and X-ray diffraction, respectively. And the effect of crystal orientation and morphology of magnesium films on corrosion behaviors was estimated by measuring anodic polarization curves in deaerated 3%NaCl solution. From the experimental results, all the sputtered magnesium films showed obviously good corrosion resistance to compare with 99.99% magnesium target of the sputter-evaporation metal. Finally it was shown that the Corrosion-resistance of magnesium films can be improved greatly by controlling the crystal orientation and morphology with effective use of the plasma sputtering technique.

• Macromolecular Research
• /
• 제14권6호
• /
• pp.640-645
• /
• 2006

Polyethylene of bimodal molecular weight distribution was irradiated with an electron beam. The thermal and mechanical properties were examined by DSC, small and wide angle X-ray scattering and static tensile test according to the crystal morphology of the irradiated samples. The crystal morphology change upon irradiation, as revealed by wide angle X-ray scattering, correlated well with the changes in melting enthalpy, whereas the lamellar thickness and the amorphous gap thickness remained virtually unchanged at irradiation doses up to 500 kGy. Crosslinks in the crystal domains became evident at an energy level of 250 kGy, resulting in reduced crystallinity and crystal size of the (110) and (200) planes. The samples became stiff and brittle with increased irradiation dose, which seem to be more relevant to the amount of cross links than the crystal morphology changes.

• 대한화학회지
• /
• 제65권1호
• /
• pp.58-61
• /
• 2021

• Journal of Advanced Marine Engineering and Technology
• /
• 제20권5호
• /
• pp.103-113
• /
• 1996

The properties of the deposited film depend on the deposition condition and these, in turn depend critically on the morphology and crystal orientation of the films. Therefore, it is important to clarify the nucleation occurrence and growth stage of the morphology and orientation of the film affected by deposition parameters, e.g. the gas pressure and bias voltage etc. In this work, magnesium thin flims were prepared on cold-rolled steel substrates by a thermo-eletron activation ion plating technique. The influence of nitrogen gas pressure and substrate bias voltage on their crystal orientation and morphology of the coated films were investigated by scanning electron microscopy (SEM) and X-ray diffraction, respectively. The diffraction peaks of magnesium film became less sharp and broadened with the increase of nitrogen gas pressure. With an increase in nitrogen gas pressure, flim morphology changed from colum nar to granular structure, and surface crystal grain-size decreased. The morphology of films depended not only on gas pressure but also on bias voltage, i.e., the effect of increasing bias voltage was similar to that of decreasing gas pressure. The effect of crystal orientation and morphology of magnesium films on corrosion behaviors was estimated by measuring anodic polarization curves in deaerated 3%NaCl solution. Magnesium, in general, has not a good corrosion resistance in all environments. However, these magnesium films prepared by changing nitrogen gas pressure showed good corrosion resistance. Among the films, magnesium films which exhibited granular structure had the highest corrosion resistance. The above phenomena can be explained by applying the effects of adsorption, occlusion and ion sputter of nitrogen gas.

• 해양환경안전학회지
• /
• 제17권2호
• /
• pp.155-160
• /
• 2011

현재 지구온난화 등의 환경문제로 인해 각종 산업분야에서 정량화에 대한 요구가 증대되어 해양산업에도 그 수요가 증가하고 있는 실정이다. 따라서 본 연구에서는 차세대 경량화 재료인 마그네슘이 활용되기 위해서 반드시 극복해야할 가장 중요한 특성인 내식특성에 대하여 고찰하고, 그 내식특성 향상을 위한 마그네슘 박막의 Morphology나 결정배향성의 영향을 해명하고자 하였다. 실험결과로부터 제작한 Mg 박막의 전기화학적 내식특성은 Ar 가스압이 높은 조건에서 제작한 막일수록 내식특성이 우수하였다. 이러한 경향은 표면 및 단면의 Morphology와 결정배향성과의 상관관계를 통하여 설명 가능하였다.

• 한국결정성장학회지
• /
• 제18권5호
• /
• pp.184-190
• /
• 2008

단순 침전법으로 타원, 땅콩, 아령, 바디가 있는 구형 모양의 $CaMoO_4$ 결정을 합성하였다. $Ca^{2+}$ 이온과 $MoO_4^{2-}$ 이온 농도가 증가함에 따라서 $CaMoO_4$의 형태는 차원형에서 땅콩 모양과 아령 모양을 거쳐서 마디가 있는 구형 모양으로 전개됨을 확인하였다. 이러한 $CaMoO_4$ 결정의 형태의 전개는 프랙탈 메커니즘에 기인한다. 타원형의 양 끝 부분에서부터 가지를 치면서 결정 성장이 시작된다. 1차와 2차 프랙탈 성장에 의해서 땅콩 모양과 아령 모양이 각각 형성되었다. 아령 모양에서 더 프랙탈 성장을 하여 최종적으로 마디가 있는 구형이 형성되었다.