• Korean Chemical Engineering Research
• /
• v.51 no.4
• /
• pp.506-512
• /
• 2013

Biomass and low-grade coals are known to be better potential sources of energy compared to crude oil and natural gas since these materials are readily available and found to have large reserves, respectively. Gasification of these carbonaceous materials produced syngas for chemical synthesis and power generation. Woodchip, sawdust and lignite were gasified with steam in a thermobalance reactor under atmospheric pressure in order to evaluate their kinetic rate information. The effects of gasification temperature ($600{\sim}900^{\circ}C$) and partial pressure of steam (20~90 kPa) on the gasification rate were investigated. The three different types of gas-solid reaction models were applied to the experimental data to predict the behavior of the gasification reactions. The modified volumetric model predicted the conversion data well, thus the model was used to evaluate kinetic parameters in this study. The observed activation energy of biomass, sawdust and lignite gasification reactions were found to be in reasonable range and their rank was found to be sawdust > woodchip > lignite. The expression of apparent reaction rates for steam gasification of the three solids was proposed to provide basic information on the design of coal gasification processes.

• KSBB Journal
• /
• v.8 no.1
• /
• pp.49-54
• /
• 1993

The contents of odd number fatty acid in walnut, peach seed and apricot seed were analyzed by HPLC. The results were as follows; the contents of crude oil in walnut, peach seed and apricot seed were 61.7%, 48.21%, and 52.34%, respectively. The contents of neutral lipid in walnut peach seed, and apricot seed were contained 62.32%, 91.50%, and 88.00%, respectively. The contents of glycolipid in walnut peach seed and apricot seed were contained 34.14%, 3.25%, and 4.78%, respectively. The contents of phospholipid in walnut peach seed and apricot seed were contained 3.54%, 5.25%, and 7.27%, respectively. The contents of odd number fatty acid and even number fatty acid in neutralipid were walnut 37.07% and 36.72%, peach seed 5.4% and 94.60%, and apricot seed 6.85% and 93.92%, respectively. The contents of odd number fatty acid and even number fatty acid in glycolipid were walnut 5.37% and 46.21%, peach seed 6.97% and 89.42%, and apricot seed 10.50% and 89.42%, respectively. The contents of odd number fatty acid and even number fatty acid in phospholipld were walnut 3.57% and 96.43%, peach speed 6.51% and 93.49%, and apricot seed 15.00% and 84.20%, respectively. The contents of odd number fatty and even number fatty acid in total fatty acid were walnut 14.47% and 85.53%, peach seed 1.17% and 98.83%, and apricot seed 4.3% and 95.97%, respectively.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.25 no.5
• /
• pp.205-211
• /
• 2015

Most of the sulfur is obtained from desulfurization of natural gas and crude oil. In Korea, more than 120 tons of sulfur are produced by refinery, and about 50 % of the produced sulfur is used as a raw material for the production of fertilizer and sulfuric acid. Modified sulfur is manufactured from excessive sulfur that could be used to improve concrete properties, and this study evaluated concrete strength and durability that contains modified sulfur. Flexural and compressive strengths of concrete with sulfur modified polymer were comparable to those of OPC concrete with mixing water at similar temperatures, while the strengths increased a little as mixing water temperature increased. It was also confirmed that the resistance to freeze-thaw damage was more dependent on entrained air characteristics obtained by a proper use of air entraining agent than on the use of sulfur modified polymer. When concrete was immersed in 5 % sulfuric acid, the rate of reduction in compressive strength of OPC concrete was less than 1/4 of the strength reduction of concrete with sulfur modified polymer. Also, the resistance of concrete with sulfur modified polymer to scaling due to the use of de-icing salt was evaluated as Class 1, while that of OPC concrete was evaluated as Class 4, as aggregates were exposed. Accordingly, it is believed that sulfur modified polymer could be effectively used for bridge deck concrete since sulfur modified polymer improves the durability of concrete.

• Journal of Environmental Policy
• /
• v.13 no.2
• /
• pp.99-129
• /
• 2014

This research estimates the impact of population aging on energy use and carbon emissions by energy sources and by industrial sectors in Korea until 2035. For the estimation, the structural change in household consumption expenditure identified by the age-specific consumption pattern was analyzed in conjunction with energy and environment input-output tables. The estimation result presents that, despite the population aging, energy use and carbon emissions induced by household consumption continue to increase until 2026, and then that elevated levels of energy use and carbon emissions will be maintained for a considerable period of time. According to the estimation by energy sources, the use of natural gas will show substantial increase while the use of crude oil will switch to a downturn at a relatively early period. According to the estimation by industrial sectors, carbon emissions in the sectors with relatively high consumption share of old households such as medical health, dwelling, lighting, heating, air-conditioning, and food will have substantial increase, whereas those in the sectors associated with education, transport, catering, and accommodation services will turn downward relatively early. In addition, the study analyzes through policy simulation the impact of aging-related policy similar to the basic pension system, which is recently being discussed for legislation, on energy use and carbon emissions.

• Journal of the Korean Institute of Gas
• /
• v.7 no.1 s.18
• /
• pp.24-27
• /
• 2003

In this paper it was investigated 15 heaters of CDU plant heater, NCC plant heater, CO plant heater, Aromatic plant heater and so on while running in our country. It was also analysed the standard of operation procedure, the action in alarm, the interlock system, the operating situation of the interlock by-pass and major accident about the heater and so on. This paper presents the installation of the on-line monitoring, the additional installation of the local pressure gauge and temperature gauge, the check in starting operation,'the management of the interlock by-pass, the change of manufacturer causing the disorder of instrument sensor, the management method of DCS alarm for methods of the interlock prevention and facilities improvement. It was few information about the heater interlock in the inside and outside of the country We mainly have studied with reflecting the opinion of the operator and manager on site, the sheet of process trouble and operation procedure and so on. we think that the accident relating to the interlock will significantly reduce if the companies apply the conclusion of this study(i.e. methods of the interlock prevention and facilities improvement).

• Applied Biological Chemistry
• /
• v.26 no.2
• /
• pp.90-96
• /
• 1983

To study the composition of silkworm pupae oil, lipid of silkworm pupae was separated into two fractions, ether extractable and 85% methanol extractable, and the lipid components of each fraction were analyzed by using silicic acid column, thin layer chromatography and gas chromatography. Silkworm pupae contains 35.4% crude fat (dry-basis) of which consists 34.4% diethyl ether-extract and 0.9% of 85% methanolextract. The diethyl ether-extract contained 96.1% of neutral lipid, 2.9% of glycolipid and 1.0% of phospholipid while methanol-extract was consisted of 47.4% of neutral lipid, 14.6% of glycolipid and 38.1% of phospholipid. The major components of phospholipid were phosphatidyl glycol(41.0%), and phosphatidyl choline(28.2%) and phosphatidyl ethanolamine(21.2%) in the diethyl ether-extract and phosphatidyl glycol(48.4%), phosphatidyl inositol(22.8%) and phosphatidyl choline(17.9%) in the methanol-extract. The major fatty acids of the total lipid were oleic acid(33.5%), linolenic acid(31.0%) and palmitic acid(23.1%).

• Journal of the Korean Institute of Gas
• /
• v.24 no.1
• /
• pp.17-22
• /
• 2020

Light Naphtha is distillated from crude oil unit and separated into the methane, ethylene and propylene by boiling point difference in sequence. This separation is conducted using a series of binary-like columns. This separation method is known that the energy consumed in the reboiler is used to separate the heaviest components and most of this energy is discarded as vapor condensation in the overhead cooler. In this study, the first two columns of the separation process are replaced with the Petlyuk column. A structural design was exercised by the stage computation with ideal tray efficiency in equilibrium condition. Compared with the performance of a conventional system of 3-column model, The design outcome shows that the procedure is simple and efficient because the composition of the liquid component in the column tray was designed to be similar to the equilibrium distillation curve. The performance of the new process indicates that an energy saving of 12.1% is obtained and the cost savings of 44 million won per day based on gross domestic product is reduced under same total number of trays and the initial investment cost is saved.

• Current Research on Agriculture and Life Sciences
• /
• v.22
• /
• pp.1-12
• /
• 2004

Pod-edible bean or snap bean is a fairly new crop to domestic farmers but the national demand is steadily increasing in recent years along with the development of western food business and change in dietary patterns. At the same time, much efforts are being made to export it to foreign country, mainly to Japan. The amount of seeds introduced from outside is also continuously increasing along with the enlargement of area planted for the crop. Hybridization breeding for the crop has already been started to supply the cheaper and better seeds which will reduce the seed costs and foster the higher income to the farmers. In this experiment, several technologies related with the production of quality seeds are preliminary investigated. Some of the results obtained are summarized as follows; 1. Highly significant interaction was recognized between planting dates and no. of pods per plant and no. of branches but no interaction between planting dates and plant height and no. of nodes on main stem. Days to maturity was proportionally reduced to later planting dates. 2. Rate of viviparous pods and seeds was gradually increased in later planting dates but rate of germination was increased in earlier planting dates with lower germination rate in white seed coat grains than in colored seed ones. 3. Seed yield was higher in the earlier planting dates with a great deal of varietal difference. Early to mid April was considered to he the optimum planting dates for snap bean in Kyungbuk area. High correlation was recognized between seed yield and no. of pods per plant, no. of seeds per plant, and 100 seed weight. 4. Days to flowering was three and seven days longer in Cheongsong, high mountainous area than in Kunwi, somewhat prairie lowland. One hundred seed weight was also higher in Cheongsong than in Kunwi. Rate of viviparous grains, pods, and decayed seeds was higher in Cheongsong but, at the same time, the rate of germination and seed yield was also higher in Cheongsong. 5. One hundred seed weight of KLG5007 increased continuously up to 35days after flowering and decreased thereafter but that of KLG50027 increased to 40days after flowering and slowly reduced thereafter. The content of crude oil reached to maximum at 40 days after flowering and reduced thereafter. The rate of germination in Gangnangkong 1 was the highest, 89.3%, at 35 days after flowering and reduced thereafter while that in KLG50027 reached to maximum, 70.7%. at 40days after flowering and reduced thereafter. Thus, the optimum harvesting time for snap bean was considered to be 35~40days after flowering. 6. The snap bean pods at yellow bean stage easily became viviparous ones under saturated moisture conditions for 24 hours at $25{\sim}30^{\circ}C$. Therefore, it is recommended to harvest pods somewhat earlier than yellow-bean stage and let them do post maturing, especially when it is to be rained.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.20 no.5
• /
• pp.467-472
• /
• 1991

In order to investigate the changes of lipid ingredient and fatty acid content in flint corn by a growth process, total lipids from flint corn(Zea may l.) were extracted, purified and fractionated into three lipid classes (neutral lipid ; NL, glycolipid ; GL, phospolipid ; PL) by silicic acid column chromatography (SACC). Non-polar lipid ingredients and fatty acid contents were determined by thin layer chromatography (TLC) and gas chromatography (GC). And non-polar lipid ingredients were quantitatived by TLC scanner. The crude oil among proximare composition increased 2.74% to 4.43% and NL and PL were fractionated by SACC increased 48.5% to 86.02%, 1.01% to 2.73%, respectively. But GL decreased 50.4% to 11.25%. Neutral lipid ingredients identified monoglyceride, were 1.1~3.7%, 11.9~16.1%, 2.3~4.2%, 16.7~21.5% and 58.5~63.6%, respectively. The major fatty acids of NL were linoleic (48.9~61.0%), oleic(22.3~34.2%), palmitic (10.3~11.7%) acids and stearic, linolenic acids were also detected as minor components. The ratio of total unsaturated fatty acid to total saturated fatty acid presented a higher percentage of 5.87~6.34. The physico-chemical characteristics of flint corn lipids were presented as specific gravity presented 0.920, refractive index 1.468, saponification value 191.2, unsaponificable matter 0.97%, acid value 0.58 and iodine value 124.6, respectively.

• Korean Journal of Breeding Science
• /
• v.49 no.3
• /
• pp.224-229
• /
• 2017

A new peanut variety 'Daan'(Arachis hypogaea ssp. hypogaea L.) was developed at the Department of Southern Area Crop Science, National Institute of Crop Science (NICS) in Milyang 2014. This was developed from the cross between 'Iksan 31' with Virginia typed short stem and 'Dakwang' with Shinpung-typed larger grain. 'Daan' which is a Shinpung plant type had 13 branches per plant and its length of main stem was 44cm. Each pod has two grains with brown testa and long ellipse-shaped large kernel. Its yield components showed 34 pods per plant, 127 g of 100-seed-weight and 75% of pod shelling ratio in the regional yield trials (RYT). Seed quality showed 47.8% of crude oil and 28.3% of protein content. This variety showed resistant to early leaf spot and had more resistant to late leaf spot, stem rot and lodging, compared to reference variety. In the regional yield trials for 3 years 'Daan' was more productive than reference variety by 16% with 5.00 MT/ha for grain production.