• 제목/요약/키워드: crown layer

검색결과 139건 처리시간 0.02초

영구치의 치아크기에 관한 연구 (A STUDY ON THE SIZE OF THE PERMANENT TEETH)

  • 백병주;박정렬;김재곤;이두철
    • 대한소아치과학회지
    • /
    • 제30권3호
    • /
    • pp.502-509
    • /
    • 2003
  • 전북대학교에 재학중인 학생 800명을 대상으로 구강 검사를 시행하여 정상교합자로 판단되는 86명(남자 43명, 여자 43명, 평균나이 22.2세)의 석고모형을 채득하여 분석한 결과 다음과 같은 결론을 얻었다. 1. 계측자내 오차는 순(협)설 치관 직경에서 상악 측절치가, 근원심 치관 직경에서는 상악 제 1대구치, 상악 제2대구치에서 다소 큰 값을 나타내었다. 평균 계측 오차는 순(협)설 치관 직경 측정은 0.051mm, 근원심 치관 직경 측정은 0.083mm 였다. 2. 좌우측 계측치 간의 차이는 순(협)설 치관 직경에서 평균 0.030mm, 근원심 치관 직경에서 평균 0.037mm를 보였으며, 통계학적으로 좌우측 계측치간의 유의한 차이는 없었다. 3. 영구치의 순(협)설 및 근원심 치관 직경은 전체 영구치에서 남자가 여자보다 컸다. 통계학적으로 유의성이 있는 치아는 순(협)설 치관 직경에서 상악 측절치, 상악 견치, 상악 제2소구치, 상악 제1대구치 상악 제2대구치, 하악 중절치, 하악견치, 하악 제2소구치, 하악 제1대구치 등이었고, 근원심 치관 직경에서 상악 중절치, 상악견치, 하악 견치, 하악 제1대구치 등이었다. 4. 남녀의 성차가 가장 인정되는 치아는 순(협)설 치관 직경에서는 상악 측절치, 근원심 치관 직경에서는 하악 견치였다. 5. Crown index는 남녀간에 비슷한 값을 보였고, Crown module과 Crown area는 모든 값에서 남자의 계측치가 컸다. 순(설)측 치관 직경값과 근원심 치관 직경값의 곱으로 표현되는 Crown area는 상악 제 1소구치, 하악 측절치, 하악 제 1소구치, 하악 2제소구치, 하악 제2대구치를 제외한 모든 치아에서 남녀간 차이에 통계학적 유의성이 있었다.(p<0.05)., 저염의 확산 폭이 약 10 km정도 증가하는 것으로 나타났고, 외해에 있어서 저염수는 남서풍에 의해서는 남동방향으로 그리고 북서풍에 의해서는 남서방향으로 퍼져나가는 양상을 보였다. 양쯔강에서 유출되는 평균적인 담수량에 의한 관성력과 조류의 힘만으로는 저염수가 제주도까지 도달하는 것은 힘들겠지만, 바람장과 북상하는 난류의 흐름이 합쳐질 때는 충분히 제주도 인근 해역까지 그 영향을 미칠 수 있을 것으로 예측되었다.수가 낮아지고, 소수 기회종의 우점도가 높아진 것으로 보인다.의 표면양상이 관찰되었고, 군간 별다른 차이가 없었다. 즉, 활성형 BR인 CS은 $C_{27}-BRs$, $C_{28}-BRs$의 생합성 과정뿐만 아니라 $C_{29}-BRs$의 생합성 과정을 통하여 생성되는 과정이 식물체내에 존재함을 확인 할 수 있었다.한 one-bottle 접착 시스템과 통계학적으로 유의한 차이를 보이지 않았다.y tissue layer thinning은 3 군모두에서 관찰되었고 항암 3 일군이 가장 심하게 나타났다. 이상의 실험결과를 보면 술전 항암제투여가 초기에 시행한 경우에는 조직의 치유에 초기 5 일정도까지는 영향을 미치나 7 일이 지나면 정상범주로 회복함을 알수 있었고 실험결과 항암제 투여후 3 일째 피판 형성한 군에서 피판치유가 늦어진 것으로 관찰되어 인체에서 항암 투여후 수술시기는 인체면역계가 회복하는 시기를 3주이상 경과후 적어도 4주째 수술시기를 정하는 것이 유리하리라 생각되었다.한 복합레진은 개발의 초기단계이며, 물성의 증가를 위한 연구가 필요할 것으로 사료된다.또 다른 약물인 glycyrrhetinic acid($100{\mu}M$)도 CCh 자극으로

  • PDF

강섬유보강숏크리트의 역학적 특성 및 경제성 평가 (Mechanical Properties and Economic Evaluation of Steel Fiber Reinforced Shotcrete)

  • 손영현;박우진
    • 한국안전학회지
    • /
    • 제13권2호
    • /
    • pp.122-129
    • /
    • 1998
  • A field experiment was performed to analyze the properties of SFRS(steel fiber reinforced shotcrete) against WMRS(wire mesh reinforced shotcrete) with some experimental parameters. The parameters were reinforcing methods(steel fiber and wire mesh), steel fiber contents(0.5%, 0.75%, and 1.0%), silica fume contents(0.0% and 10.0%), spraying thicknesses of layer(10㎝, 8㎝, and 6㎝), and spraying parts(side wall, shoulder, and crown). According to the analyzed results, the mechanical properties of SFRS such as compressive strength, flexural strength, and load-carrying capacity after cracks were improved. And the economic evaluation was also performed on the basis of the required thickness of the layer and other researcher's results for rebound ratios. From the results of this tests, it is found that the traditional WMRS may be substituted by the SFRS in the viewpoint of the economic evaluation as well as the mechanical properties. In additions, the silica fume, even if it is very expensive, can significantly improve the mechanical properties of the shotcrete regardless of mixing with or without the steel fiber.

  • PDF

Topology optimization of nonlinear single layer domes by a new metaheuristic

  • Gholizadeh, Saeed;Barati, Hamed
    • Steel and Composite Structures
    • /
    • 제16권6호
    • /
    • pp.681-701
    • /
    • 2014
  • The main aim of this study is to propose an efficient meta-heuristic algorithm for topology optimization of geometrically nonlinear single layer domes by serially integration of computational advantages of firefly algorithm (FA) and particle swarm optimization (PSO). During the optimization process, the optimum number of rings, the optimum height of crown and tubular section of the member groups are determined considering geometric nonlinear behaviour of the domes. In the proposed algorithm, termed as FA-PSO, in the first stage an optimization process is accomplished using FA to explore the design space then, in the second stage, a local search is performed using PSO around the best solution found by FA. The optimum designs obtained by the proposed algorithm are compared with those reported in the literature and it is demonstrated that the FA-PSO converges to better solutions spending less computational cost emphasizing on the efficiency of the proposed algorithm.

금속소부도재관용 Ni-Cr 합금에 첨가된 Nb이 계면특성에 미치는 영향 (A study on interfacial characteristics of Ni-Cr alloy by Nb content for Porcelain Fused to Metal Crown)

  • 김치영;최성민
    • 대한치과기공학회지
    • /
    • 제27권1호
    • /
    • pp.97-104
    • /
    • 2005
  • The effect of Nb on interfacial bonding characteristics of Ni-Cr alloy for porcelain fused to metal crown (PFM) has been studied in order to investigate oxide layer. A specimens, which is 0.8mm in thickness, were fired at 1,000$^{\circ}C$ with four tests such as air, vacuum, air for 5 minutes and vacuum for 5 minutes in order to examine an oxide behavior of alloy surface generated by the adding of Nb to be controlled at a rate of 0, 1, 3 and 5. It observed oxide film form of the fired specimens with optical microscope and scanning electron microscope (SEM), and chemical formation of them with energy disperse X-ray spectroscopy (EDX). The other specimens, which is 2mm in thickness, were fired at 1,000$^{\circ}C$ with air and vacuum in order to analyze the diffusion behaviors of alloy-porcelain interface by X-ray dot mapping. The results of this study were as follows: 1. The observation of microstructure of specimens by SEM showed that the more Nb content is high, the more much intermediate compound of rich Nb is observed. 2. The surface morphology of oxide film is most dense in 3% Nb. The heat treatment in air constitutes denser oxide film than heat treatment under vacuum. 3. The diffusion behavior of oxide layer by X-ray dot mapping showed that Si, Al of porcelain diffuse toward metal.

  • PDF

도재용착주조관용 Ni-Cr계 합금의 조성에 따른 표면특성 및 전단결합강도 관찰 (The Surface Property and Shear Bonding Strength according to Composition of Ni-Cr alloy for Porcelain Fused to Metal Crown)

  • 김갑진;정인성;최성민
    • 대한치과기공학회지
    • /
    • 제35권2호
    • /
    • pp.113-120
    • /
    • 2013
  • Purpose: This study was to observe surface property and bonding strength according to composition of Ni-Cr alloy for porcelain fused to metal crown. The two kinds of Ni-Cr alloy with different composition ratio of parent metal were observed general properties and chemical properties of each alloy surface and measured the shear bonding strength between ceramic and each alloys. The aim of study was to suggest the material for design of parent metal's composition ratio to development of alloy for porcelain fused to metal crown. Methods: The two kinds of alloy as test specimen was Ni(71wt.%)-Cr(12wt.%) and Ni(63wt.%)-Cr(23wt.%) alloy. The oxide on surface was observed by SEM and EDX. And the shear test was performed by MTS. Results: The surface property and oxide characteristic analysis of oxide layer, weight percentage of Element O within $Ni_{71}Cr_{12}$ alloy measured 12.74wt.%, but $Ni_{63}Cr_{23}$ alloy was measured 15.91wt.%. And the maximum shear bonding strength was measured 106.14MPa between $Ni_{71}Cr_{12}$ alloy and vintage halo (VV group). Conclusion: The surface property and oxide characteristic of $Ni_{71}Cr_{12}$ alloy was similar to $Ni_{63}Cr_{23}$ alloy. And VV group has the strongest shear bonding strength.

금속-도재관용 Ni-Cr 합금의 표면산화물특성에 따른 전단결합강도 관찰 (Shear Bonding Strength by the Characteristic of Metal Oxidation on the Surface of Ni-Cr Alloy for Porcelain Fused Metal Crown)

  • 정인성;김치영
    • 대한치과기공학회지
    • /
    • 제35권4호
    • /
    • pp.359-364
    • /
    • 2013
  • Purpose: This study was to observe characteristic of metal oxidation and bonding strength according to composition of Ni-Cr alloy for porcelain fused to metal crown. The three kinds of Ni-Cr alloy with different composition ratio of parent metal were observed general properties and chemical properties of each alloy surface and measured the shear bonding strength between ceramic and each alloys. The aim of study was to suggest the material for design of parent metal's composition ratio to development of alloy for porcelain fused to metal crown. Methods: The three kinds of alloy as test specimen was Ni(59wt%)-Cr(24wt%), Ni(67wt.%)-Cr(16wt.%) alloy and Ni(71wt%)-Cr(12wt%)alloy. The oxide on surface was observed by EDX. And the shear test was performed by MTS. Results: The surface property and oxide characteristic analysis of oxide layer, weight percentage of Element O within $Ni_{59}Cr_{24}$ alloy measured 23.03wt%, $Ni_{67}Cr_{16}$ alloy measured 21.13wt% and $Ni_{71}Cr_{12}$ alloy was measured 48.55wt%. And the maximum shear bonding strength was measured 58.02Mpa between $Ni_{59}Cr_{24}$ alloy and vintage halo(H2 group). Conclusion: The surface property and oxide characteristic three kind of Ni-Cr alloy was similar. and shear bonding strength showed the highest bonding strength in H2 specimens.

경사식 호안 상부구조물 배후 포장체에 작용하는 파력에 대한 실험적 연구 (Experimental Investigation of Wave Force on the Pavement behind Crown Wall of Rubble Mound Seawall)

  • 고행식;이주연;장세철;오상호
    • 한국해안·해양공학회논문집
    • /
    • 제34권1호
    • /
    • pp.19-25
    • /
    • 2022
  • 수리모형실험을 통해 경사식 호안 배후면 포장체 상부면에 작용하는 월파력과 하부면에 작용하는 양압력을 계측하고 설계에 활용 가능한 경험식을 제안하였다. 상부구조물의 파라펫, 수심, 상대여유고 및 소파블록 피복두께 조건을 다르게 실험을 수행하여 경사식 호안 상부구조물 및 배후 포장체에 작용하는 파력을 분석하였다. 이를 통해 월파에 의한 파력과 양압력에 영향을 미치는 주요 상관변수를 식별하고, 포장체에 작용하는 파력을 산정할 수 있는 경험식을 제안하였다.

잠제 설치 연안의 처오름 높이 특성 ; PART II - 잠제의 제원에 의한 영향 (Characteristics of Run-up Height over Sandy Beach with Submerged Breakwaters ; PART II - Effect of Shape of Submerged Breakwaters)

  • 허동수;이우동
    • 대한토목학회논문집
    • /
    • 제28권4B호
    • /
    • pp.429-439
    • /
    • 2008
  • 본 연구에서는 잠제의 제원(천단수심, 천단폭, 사면경사, 제장)에 따라 해빈상을 전파하는 풍파의 처오름 높이 변화특성을 논의하기 위하여, 기존의 수리모형 실험치와 계산치를 비교 검토를 통해 타당성과 유효성이 검증된 수치모델로서, 파 투과성구조물 해빈의 상호간섭을 직접 해석할 수 있는 3D-수치모델(LES-WASS-3D; 허와 이, 2007)을 이용하여 잠제 2기의 제원에 따른 수치시뮬레이션을 실시하였다. 그 결과 천단수심, 천단폭, 사면경사, 제장의 변화가 연안에서의 처오름 높이에 미치는 영향에 관하여 검토하였으며, 아울러, 잠제 주변의 파고분포 및 상층흐름특성과의 관계에 대해서도 논의하였다.

터널시공 중 붕락발생 원인과 최신 보강기술 (Major causes of failure and recent measurements of tunnel construction)

  • 박봉기;황제돈;박치면;김상수
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2005년도 지반공학 공동 학술발표회
    • /
    • pp.140-153
    • /
    • 2005
  • During the tunnel construction the major failure mode can be categorized as: tunnel failure just after the tunnel excavation without support, failure after application of shotcrete and finally failure after setting the concrete lining. The failure mode just after the tunnel excavation without support, can be further classified as : bench failure, crown failure, face failure, full face failure, failure due to weak strata and failure due to overburden. Moreover the failure after application of shotcrete is classified as heading face failure, settlement of shotcrete support, local failure of shotcrete lining and invert shotcrete. To find out the major causes of tunnel collapse, the investigation was done in case of the second phase of Seoul subway construction. The investigation results depicted that the major causes of tunnel collapse were due to the weak layer of rock/fault and sudden influx of ground water from the tunnel crown. While the investigation results of the mountain road tunnels construction have shown that the major causes of tunnel failure were inadequate analysis of tunnel face mapping results, intersection of faults and limestone cavities. In this paper some recent measurement in order to mitigate such tunnel collapse are presented

  • PDF

Nb이 첨가된 금속소부도재관용 Ni-Cr 합금 표면의 EPMA 관찰 (A Study on EPMA on Ni-Cr Alloy by Nb content for Porcelain Fused to Metal Crown)

  • 김치영;최성민;조현설
    • 대한치과기공학회지
    • /
    • 제28권1호
    • /
    • pp.19-26
    • /
    • 2006
  • The effect of Nb on interfacial bonding characteristics of Ni-Cr alloy for porcelain fused to metal crown (PFM) has been studied in order to investigate oxide layer. A specimens of Ni-Cr alloy, which is 0.8mm in thickness, within the porcelain furnace of 1,000$^{\circ}C$ with four tests such as air, vacuum, air for 5 minutes and vacuum for 5 minutes in order to examine an oxide behavior of alloy surface generated by the adding of Nb to be controlled at a rate of 0, 1, 3 and 5. Oxide film was observed form of the fired specimens with scanning electron microscope (SEM), and at the same time it measured Electron Probe Micro Analyzer (EPMA). The result of this study were as follows: 1. Cr oxide film and Nb oxide film were observed from the surface of specimen to be controlled at a rate of Nb 1%. 2. Nb oxide film was observed from the interface of specimens to be controlled at a rate of Nb 1% and 3%. 3. The stability of oxide films that treated in air were more stable than treated under vacuum.

  • PDF