• 한국산림과학회지
• /
• 제95권3호
• /
• pp.328-333
• /
• 2006

복분자딸기(Rubus coreanus Miq.)의 수관 층위별 광합성 특성과 잎 및 과실 특성을 조사하기 위하여 국립산림과학원 산림유잔자원부 구내에 조성된 복분자딸기 클론보존원에서 선발된 세 클론을 대상으로 각각의 특성을 조사하였다. 수관층위별 광합성 특성에서 광보상점은 상 중 하층이 각각 PPFD 33, 20, $5{\mu}mol\;m^{-2}S^{-1}$로 나타났으며, 층위별 광포화점은 상 중 하층이 각각 PPFD 1000, 500, $200{\mu}mol\;m^{-2}S^{-1}$ 에서 각각 8.52, 5.25, $3.60{\mu}mol\;CO_2\;m^{-2}S^{-1}$ 의 광합성 속도를 나타냈다. 클론별로는 덩굴형인 의령 7호가 상층에서 가장 우수한 광합성 능력을 보였으며 직립형인 송계 6호는 덩굴형의 두 클론과 비교해 하층에서 낮은 광합성 능력을 나타냈는데 이는 각 클론의 수형 특성에 따른 영향으로 사료된다. 층위별 엽록소 함량은 세 클론 모두 중층에서 가장 많은 양을 나타냈고 상층에서 가장 적은 엽록소 함량을 나타냈다. 잎의 특성에서는 층위가 높을수록 엽장, 엽폭, 정소엽길이, 정소엽폭 및 엽면적 항목이 낮은 값을 나타내 층위별 광합성 능력과 상반되는 경향을 보인 반면, 잎 특성의 단위면적당 건중량과 과실 특성의 종경, 횡경 및 입중 항목은 층위가 높을수록 큰 값을 나타내 층위별 광합성 능력과 유사한 경향을 나타냈으며 과실의 당도는 중층에서 가장 큰 값을 나타냈다.

• Journal of Ecology and Environment
• /
• 제35권3호
• /
• pp.177-188
• /
• 2012

We analyzed crown development in Aucuba japonica Thunb. var. japonica resulting from the responses of phytoelements to habitat light conditions over a long period of time. Over the years, the degree of extension unit (EU) dimorphism and the degree of anisophylly were higher under shaded conditions than in brighter conditions. An overall temporally increasing pattern in the degree of EU dimorphism was found while no clear-cut trend was found in the case of anisophylly. EU length and number of leaves per EU co-varied in a spatio-temporal context. The number of terminal buds and their sizes acted as the key initiators of morphological differences of phytoelements which were further amplified following bud break. Leaf area density was displayed mostly in the apex peripheral layer of the crown and the apex layer received most of the incident light. There was a tradeoff between annual leaf production and mean leaf size. Depending on the heterogeneity of irradiance level within a crown, correlative growth inhibition caused higher EU mortality at brighter sites. Due to high mortality, shorter EUs had a mere role in the construction of structural framework of the crown except for the formation of some gaps. There was a strong convergence of EU dimorphism, anisophylly, EU extension growth and variations in leaf size towards formation of functional crown to reduce potential self-shading. Depending on the irradiance level, Aucuba japonica Thunb. var. japonica showed two different modes of crown expansion. At the brighter sites, individual crown expansion was progressive while at the darker sites, individual crown expanded in a diminishing manner and maintained a stable size. A plant's "growth diminishing phase" appeared earlier at shaded sites than brighter sites.

• 한국정보처리학회논문지
• /
• 제7권3호
• /
• pp.909-922
• /
• 2000

High sped messaging layer for application's feeling of low level network performance is needed by Clustering System based on high speed network fabrics. It should have the mechanism to directly pass messages between network card and application space, and provide flexible affodabilities for many diverse applications. In this paper, CROWN (Clustering Resources On Workstations' Network) which is designed and implemented for multi-purpose clustering system will be introduced briefly, and CLCP(CROWN Lean Communication Primitives)which is the high speed messaging layer for CROWN will be followed. CLCP consists of a firmware for controlling Myrinet card, device drier, and user libraries. CLCP supports various application domains as a result of pooling and interrupt receive mechanism. In case of polling based receive, 8 bytes short message, and no other process, CLCP has 262 micro-second response time between two nodes, and IM bytes large message, it shows 442Mbps bandwidth.

• The Korean Journal of Ecology
• /
• 제24권6호
• /
• pp.341-348
• /
• 2001

Population dynamics of the oldest relic stand of Pinus densiflora for. erecta which remains as a status of patch in Sokwang-Ri area, Uljin-Gun, was studied to provide the basic data for conservation of the oldest pine stand in Korea. The upper slope site and ridge site including total 12 plots mainly represented Pinus densiflora for. erecta and Quercus mongolica. These two tree species showed reverse J-shaped distribution. From this information, it was concluded that intensive interspecific competition between two species could be occurring. Age distribution of P. densiflora for. erecta on the sites above middle slope area was indicated bi-modal type or tri-modal type which was known as an age structure of climax forest. Therefore, it was estimated that Pinus densiflora for. erecta population could be continuously maintained in the each patch above middle slope area. In the valley sites, hardwood species such as Q. mongolica, Q. variabilis, Styrax obassia and Acer pseudosieboldianum occupied most part of the under crown-cover area and their seedlings and saplings were developing into the closed upper layer crown because the height of upper layer crown reached about 35 meters and such a high crown height was more suitable for light utilization by plants of under layer. The growth patterns were mainly fluctuated for the entire life time of the oldest tree caused by frequent disturbance. And the initial growth curves of the mature trees and suppressed juvenile trees showed different tendencies along the sites.

• The Journal of Advanced Prosthodontics
• /
• 제7권6호
• /
• pp.475-483
• /
• 2015

PURPOSE. The objective of this study was to evaluate the influence of various cement types on the stress distribution in monolithic zirconia crowns under maximum bite force using the finite element analysis. MATERIALS AND METHODS. The models of the prepared #46 crown (deep chamfer margin) were scanned and solid models composed of the monolithic zirconia crown, cement layer, and prepared tooth were produced using the computer-aided design technology and were subsequently translated into 3-dimensional finite element models. Four models were prepared according to different cement types (zinc phosphate, polycarboxylate, glass ionomer, and resin). A load of 700 N was applied vertically on the crowns (8 loading points). Maximum principal stress was determined. RESULTS. Zinc phosphate cement had a greater stress concentration in the cement layer, while polycarboxylate cement had a greater stress concentration on the distal surface of the monolithic zirconia crown and abutment tooth. Resin cement and glass ionomer cement showed similar patterns, but resin cement showed a lower stress distribution on the lingual and mesial surface of the cement layer. CONCLUSION. The test results indicate that the use of different luting agents that have various elastic moduli has an impact on the stress distribution of the monolithic zirconia crowns, cement layers, and abutment tooth. Resin cement is recommended for the luting agent of the monolithic zirconia crowns.

• 한국산림과학회지
• /
• 제100권1호
• /
• pp.8-13
• /
• 2011

본 연구는 다래 및 교잡종 다래의 수관층위에 따른 광환경 차이에 따른 광합성능력, 엽 그리고 과실의 특성 변화를 구명하고자 실시하였다. 수관층위별에 따른 광합성속도를 측정한 결과, 수관층위가 높아질수록 광합성 속도가 증가하여 광도 $1,000{\mu}mol{\cdot}m^{-2}s^{-1}$에서 하층($5.82{\mu}mol\;CO_2\;m^{-2}s^{-1}$), 중층($7.11{\mu}mol\;CO_2\;m^{-2}s^{-1}$), 상층($9.54{\mu}mol\;CO_2\;m^{-2}s^{-1}$)의 순으로 높은 광합성속도를 나타냈다. 엽의 경우, 수관층위가 높아질수록 엽폭과 엽장 그리고 엽면적이 감소하였다. 즉, 하층, 중층, 상층 수관층위가 증가할수록 엽면적은 162.8, 90.9, $68.3cm^2$ 로 각각 감소하였다. 과실의 경우에는 수관층위가 높아질수록 과실 중량 및 과실 폭과 과실 길이가 증가하는 경향을 나타냈다. 이러한 결과는 상층의 높은 광합성능력이 과실의 생육에 영향을 미친 것으로 수관상층부로의 결과지 유도를 통해 대립성 다래 과실생산이 가능할 것으로 여겨진다.

• 대한치과기공학회지
• /
• 제33권3호
• /
• pp.219-224
• /
• 2011

Purpose: The current study focused on investigating color change of dental zirconia block with respect to the block coloring time. Methods: Three types of dental zirconia blocks(Zirtooth, Pearl-HT, D-Max) were tinted with coloring agent under four different time condition (0 minutes, 1 minutes, 10 minutes, 30 minutes). The quantitative evaluation of the tinted dental zirconia blocks was conducted with spectrophotometer. Results: The Zirtooth and D-Max blocks showed lower H value. The Pearl-HT blocks showed poor reflectivity(L value). Conclusion: The study of color change of zirconia block, which consists the substructure of all ceramic Crown, is applicable for deciding appropriate coloring condition when fabricating one layer ceramic Crown or double layer ceramic Crown.

• 한국작물학회지
• /
• 제43권4호
• /
• pp.223-227
• /
• 1998

The objectives of this study were to find the sprouting condition and to establish the optimum production methods of plug seedlings in yacon (Polymnia sonchifolia Poepp. & Endl.). The sprouting ratio was greatest at $30\pm 1^{\circ}C$ at 20 days after planting. Crowns with single buds were more effective than those with two or more buds for sprouting, which might be due to the apical dominance. Planting the shoots separated from crown after sprouting in the single- and double-layer polyethylene-covered greenhouses reduced seedling period with 25% and 50%, respectively. Planting the shoots after sprouting was more effective than planting the crown buds. Double-layer polyethylene-covered green-house was good for plug seedling production than open field or single-layer polyethylene-covered greenhouse. The bed soils composed of clay loam : compost or sand : compost (1:l=v:v) were more effective to produce plug seedlings than only clay loam, sand or compost. Seedlings could be produced at 30 days after planting in our studies.

• 한국안전학회지
• /
• 제30권1호
• /
• pp.111-118
• /
• 2015

In this study, we carried out the emissions analysis of CO and $non-CO_2$ for the age-classes of various pine trees(Pinus koraiensis, Pinus densiflora, Pinus rigida Mill., Pinus thunbergii Parl.) to estimate of emission factors of the crown layer and surface layer in the forest fire. We used the thermal characteristic analyzer cone heater and NDIR analyzer in order to measure amount of emission. As a result, the major emissions of Pinus koraiensis were $CO_2$ and $CH_4$ and that of Pinus thunbergii Parl. was only CO. The major emissions of the most of pine trees were NO and $N_2O$. The $CO_2$ emission of Pinus thunbergii Parl. was the highest about as $7.26{\times}10^{-2}{\sim}1.63{\times}10^{-1}g$ and next came Pinus densiflora, Pinus koraiensis, Pinus rigida Mill.. And the CO emission of Pinus thunbergii Parl. was about $5.14{\times}10^{-3}{\sim}6.58{\times}10^{-3}g$ and followed by Pinus densiflora, Pinus koraiensis, Pinus rigida Mill.. The emissions of $CH_4$, NO, and $N_2O$ showed small differences between species and the emission of $CH_4$ was $8.37{\times}10^{-5}{\sim}2.55{\times}10^{-4}g$, and NO was $6.65{\times}10^{-5}{\sim}2.0{\times}10^{-4}g$ and $N_2O$ was $1.42{\times}10^{-4}{\sim}2.09{\times}10^{-3}g$ in all species. Particularly, the emission of Pinus thunbergii Parl. was the highest in all pine trees except $CH_4$.

• 구강회복응용과학지
• /
• 제25권1호
• /
• pp.1-12
• /
• 2009

이 논문의 목적은 시멘트 층 내의 응력분포에 대해 금관의 물성과 시멘트의 물성 및 교합력의 방향이 미치는 영향을 이차원 유한요소분석으로 조사하는 것이다. Chamfer 변연을 가지는 23개의 하악 제1대구치 모델을 상정하였다. 금관의 재질은 제 3형 금합금, Ni-Cr 합금, 세라믹, 복합레진 등 4가지이며, 시멘트의 재질은 인산 아연 시멘트와 글라스 아이오노머 시멘트 등 2가지이다. 치축과 평행하게 또는 경사지게 하여 1N 단위로 금관에 하중을 가했다. 시멘트층의 응력은 금관 변연이 다른 곳보다 더 높았다. 치축에 평행한 하중이 치축에 경사진 하중보다 더 높은 응력을 발생시켰다. 경도가 더 큰 금관은 시멘트 층 내에서 더 높은 응력을 나타냈으며, 더 높은 응력은 더 큰 Young's modulus을 나타냈다.