• 제목/요약/키워드: crossing rate

검색결과 314건 처리시간 0.028초

벼 아소미노리 교배조합 품종의 벼흰잎마름병 저항성 (Resistance of Varieties Bred by Crossing with Asominori to Bacterial Leaf Blight)

  • 심재성
    • 한국자원식물학회지
    • /
    • 제10권2호
    • /
    • pp.128-134
    • /
    • 1997
  • This study was conducted to test on the resistance of varieties bred by crossing with Asominori to bacterial leaf blight. Nakdongbyeo and Dongjinbyeo which were susceptible to HB 9011, 8 resistant varieties including Ilmibyeo derived from Asominori and Asominori, Hwangok, 13 varieties including Chukoku 45 which were resistance to HB 9011, HB 9022 and HB 9033 were used to screen their res ponce depending on the various screening methods such as the true resistance, the secondary infection resistance and the disease common field test methods, and the results are as follows: Among 13 varieties tested, 11 varieties including llmibyeo showed tme resistance to HB 9011. Less than 1.0cm of disease lesion were developed on these varieties. Disease lesion was not developed on most of the Asominori lines including Daechongbyeo against IIB9011 and 1lmibyeo was also resistance to HB 9011, on this variety disease lesion area rate was 1.2%, and 7 varieties including Hwajinbyeo showed field resistance to HB 9022. Disease lesion area rate were 19.6% on Nakdongbyeo. 15.6% on Dongjinbyeo, from 3.0% to 2.4% on Asominori lines, and 0.5% on the Asominori when screened at disease common area. Disease was not developed on Keumnambyeo. Significant correlation coefficiences were found between the results from the test methods of the true resistance, the field resistance ancl the field resistance at disease common field tests on Asominori lines, but in some cases, even the varieties on which disease lesions developed, showed field resistance to HB 9022 and HB 9033.

  • PDF

대전 도심지의 K 대역 위성통신 채널특성 분석 (The Analysis of Channel Characteristics on Downtown of Daejeon for K Band Satellite Communication)

  • 권건섭;허종완;황기민;임철민;유흥균
    • 한국군사과학기술학회지
    • /
    • 제17권5호
    • /
    • pp.620-628
    • /
    • 2014
  • This paper describes the analysis results of channel characteristics in the operating area of satellite OTM (On-The-Move) terminal. The communication channel between the Koreasat-5 and OTM terminal on a test car was measured and recorded in downtown of Daejeon, using the received beacon signal of around 20 GHz. And the measurement data were statistically analyzed and then compared with highway and national road environments. The statistical evaluation of satellite channel was conducted by using probability density function and Markov model and then presented average connection duration(ACD), average fade duration(AFD), and level crossing rate(LCR) of downtown environment.

Optimal Characteristics of a Long-pulse $CO_2$Laser by Controlling SCR Firing Angle in AC Power Line

  • Noh, Ki-Kyung;Kim, Geun-Yong;Chung, Hyun-Ju;Min, Byoung-Dae;Song, Keun-Ju;Kim, Hee-Je
    • KIEE International Transactions on Electrophysics and Applications
    • /
    • 제2C권6호
    • /
    • pp.304-308
    • /
    • 2002
  • We demonstrate a simple pulsed $CO_2$ laser with millisecond long pulse duration in a tube at a low pressure of less than 30 Torr. The novel power supply for our laser system switches the voltage of the AC power line (60Hz) directly. The power supply doesn't need elements such as a rectifier bridge, energy-storage capacitors, or a current-limiting resistor in the discharge circuit. To control the laser output power, the pulse repetition rate is adjusted up to 60Hz and the firing angle of SCR(Silicon Controlled Rectifier) gate is varied from 30。 to 150。. A ZCS (Zero Crossing Switch) circuit and a PIC one-chip microprocessor are used to control precisely the gate signal of the SCR. The maximum laser output of 35 W is obtained at a total pressure of 18 Torr, a pulse repetition rate of 60 Hz, and a SCR gate firing angle of 90。 . In addition, the resulting laser pulse width is approximately 3㎳(FWHM). This is a relatively long pulse width, compared with other repetitively pulsed $CO_2$ lasers.

최소 자승법을 이용한 TSIUVC 근사합성법에 관한 연구 (A Study on TSIUVC Approximate-Synthesis Method using Least Mean Square)

  • 이시우
    • 정보처리학회논문지B
    • /
    • 제9B권2호
    • /
    • pp.223-230
    • /
    • 2002
  • 유성음원과 무성음원을 사용하는 음성부호화 방식에 있어서, 같은 프레임 안에 모음과 무성자음이 있는 경우에 음성 파형에 일그러짐이 나타난다. 본 논문에서는 최소 자승법을 적용한 새로운 TSIVUC 근사합성법을 제시하였다. 이 방법에서 TSlUVC의 추출에는 zero crossing rate과 FIR-STREAK 필터의 잔차신호를 이용한 개별피치 추출 알고리즘을 사용하였다. 실험결과, 최소 자승법을 적용하여 양호한 TSIUVC 근사합성 파형을 얻을 수 있었다. 또한 최대 오타신호에 있어서의 주파수 신호가 일그러짐이 적은 근사합성 파형에 중요한 역할을 한다는 것이다. 이 방법은 음성합성, 음성분석, 새로운 Voiced/Silence/TSIUVC의 음성부호화 방식에 활용할 수 있을 것으로 기대된다.

대도시 이동전파신호에 대한 단구간 페이딩 특성 (Short-term Fading Characteristics for Mobile Radio Signal in Built-up Areas)

  • 송기홍;김종호;이동두;양기곤
    • 한국통신학회논문지
    • /
    • 제19권5호
    • /
    • pp.815-821
    • /
    • 1994
  • 이동전파신호에서의 단구간 페이딩 현상은 이동국이 이동할 때 집, 건물 등 주변 반사체와 숲과 같은 자연적 방해물에 의한 다중경로 반사파에 의하여 발생하게 된다. 본 논문에서는 대전 및 서울 지역에서 측정하여 얻은 이동전파신호의 전계강도 측적데이타를 이용하여 확률밀도함수(PDF), 레벨 교차율(LCR), 페이드의 깊이와 넓이에 대하여 분석하였다. 분석 결과, 평균치가 일정한 작은 구간내에서의 신호 변화에 대한 통계적 분포는 레일리 분포를 따른다. 페이트 깊이는 위치에 대한 크기의 별화는 심하나 도심지역이나 변두리지역등 지역적 특성에 따른 깊이차이는 거의 없었으며, 페이트 넓이는 주변 구조물과 지역특성에 따라 변화가 매우 심하였다. 또한 레벨 교차율은 평균치 근처에서 최대가 되는 것을 볼 수 있었다.

  • PDF

최대 도플러 주파수 추정 시 대역 조절을 통한 부가 잡음의 영향 완화 기법 (SNR-independent Methods for Estimating Maximum Doppler Frequency)

  • 유현규;박구현;오성목;강창언;홍대식
    • 한국통신학회논문지
    • /
    • 제30권6C호
    • /
    • pp.475-480
    • /
    • 2005
  • 이동 통신 시스템에서 최대 도플러 주파수 정보는 여러 가지 채널 적응 기술들과 무선 자원 관리 방법들의 무선 채널에 대한 최적화를 가능하게 한다. 본 논문에서는 레벨 교차율(LCR: level crossing rate) 및 공분산 함수(COV: covariance)에 기반을 둔 두 가지 최대 도플러 주파수 추정 기법을 제안한다. 부가 잡음의 영향을 제거하기 위해 신호 대 잡음비(SNR)에 독립적인 성능을 위한 조건을 분석하고, 제시한 조건을 만족시키기 위하여 하향 표본화 (downsampling) 방법을 이용한 도플러 주파수 추정 알고리즘을 새로이 제안하다. 모의실험을 통해, 제안된 기법이 SNR 변화에 상관없이 좋은 성능을 나타냄을 확인할 수 있다.

장미 교배 효율 증대를 위한 화분 임성 검정 (An Increment of Crossing Efficiency with Consideration of Pollen Viability Analysis in Rose)

  • 황윤정;송창민;권민경;김성태;김원희;한윤열;한태호;임기병
    • 화훼연구
    • /
    • 제18권3호
    • /
    • pp.193-200
    • /
    • 2010
  • 현재 재배되고 있는 장미 재배종은 오랜 기간 동안 종간교잡과 종내교잡을 통해 선발되어 온 것으로서 대부분이 이형잡종의 게놈으로 구성되어 있어 발아율이 저조한 편이다. 따라서, 효율적인 교배를 위해서는 화분의 활력 검정이 선행되어야 한다. 이에 본 연구에서는 염색액과 발아배지를 이용하여 7품종의 화분 임성율과 발아율 검정하고 이들 결과를 토대로 화분의 크기, 배수성 및 교배조합과의 상관관계를 알아보고자 실시하였다. 화분 임성율은 '스칼렛미미'가 82%로 가장 높았으며 '피노키오'가 39%로 가장 낮았다. 발아율 관찰 결과 '스칼렛미미'가 41%로 가장 높았으며 '미니로사'가 1%로 가장 낮았다. 화분의 크기를 관찰한 결과 화분은 큰 화분과 작은 화분으로 구분되었으며 화분의 직경은 각각 $41.3-45.4{\mu}m$$30.7-37.4{\mu}m$로 관찰되었으며 화분의 크기는 10-40% 정도 차이가 있는 것으로 나타났다. 화분의 크기와 염색체 전체 길이의 합을 비교한 결과 염색체 크기와 화분의 크기는 정의 상관관계가 있음을 알 수 있었다. 교배조합 검정 결과 착과율과 발아율은 화분 발아율, 임성률 및 배수성과 상관관계가 있음을 확인하였다.

철도 안전목표 설성을 위한 안전투자 시점에 대한 연구 (A Study on Safety Investment Moment for Safety Target)

  • 곽상록
    • 한국안전학회지
    • /
    • 제32권5호
    • /
    • pp.122-128
    • /
    • 2017
  • Korean government announced long-term railway safety investment plan for the safety improvement by 2020. But no research have been done about differential analysis on railroad safety investment and safety improvement. In this study, recent 10 year data on safety investments and accident data are analysed for the differential analysis. Three main safety investments are analysed on regard to accident rate and accident fatalities. Three safety measures include level crossing accident, platform fatalities, and track trespass fatalities. About 90% of railway accident fatalities are caused by these three kind of accidents. Differential analysis shows about 4 to 6 years delay after railroad safety investment and safety improvement. This result can be utilized for the decision making on safety measures and safety target. Which required long term approach.

Fuzzy Rule Base를 이용한 한국어 연속 음성인식 (A Korean Speech Recognition Using Fuzzy Rule Base)

  • 송정영
    • 공학논문집
    • /
    • 제2권1호
    • /
    • pp.13-21
    • /
    • 1997
  • 본 연구는 연속음성을 인식하기 위하여 특징 Parameter의 변동성을 Fuzzy 변수로 취하여 Membership 함수로 표현한 후, Fuzzy 추론으로 연속음성을 인식하는 연구이다. 특징 Parameter로는 Formant 주파수, Pitch, Log Energy, Zero Crossing Rate등을 사용한다. 연속음성의 Data로서는 한국어의 연속음성을 대상으로 하여 음성인식 system을 구현한다음, 인식실험을 통하여 본 연구의 유교성을 확인한다.

  • PDF

가공열처리에 의한 Fe-30% Ni-0.1%C 합금의 기계적성질 변화 (The Variation of Mechanical Properties by Thermomechanical Treatment in Fe-30%Ni-0.1 %C Alloy)

  • 안행근;김학신
    • 열처리공학회지
    • /
    • 제7권2호
    • /
    • pp.88-95
    • /
    • 1994
  • In order to compare mechanical properties of ausformed martensite with those of marformed martemsite in Fe-30%Ni-0.1%C alloy and to investigate their strengthening mechanisms, ausformed martensite and marformed martensite were prepared by ausforming treatment and marforming treatment respectively. The microstructures were observed and the quantities of retained austenite, hardness, yield strength, ultimate tensile strength and elongation were examined. The strength of ausformed martensite was mainly increased because of the lattice defects inherited from austenite. The ductility of ausformed martensite was constant at the rate of 7-8% by ductile matrix formation of the retained austenite in spite of the increase in strength. The strength of marformed martensite was increased by the increment in dislocation density, the crossing of transformation twin with deformation twin and the mutual crossing of deformation twin. The ductility of mar formed martensite was slightly lower than that of ausformed martensite, but the strength of mar formed martensite was prominently higher.

  • PDF