• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.12
• /
• pp.209-218
• /
• 2012

Recently, the Field Programmable Stateful Logic Array (FPSLA) was proposed as one of the most promising system integration technologies which will extend the life of the Moore's law. This work is the first proposal of the FPSLA design automation flow, and the approaches to logic synthesis, synchronization, physical mapping, and automatic placement of the FPSLA designs. The synchronization at each gate for pipelining determines the x-coordinates of cells, and reduces the placement to 1-dimensional problems. The objective function and its gradients for the non-linear optimization of the net length and placement density have been remodeled for the reduced global placement problem. Also, a recursive algorithm has been proposed to legalize the placement by relaxing the density overflow of bipartite bin groups in a top-down hierarchical fashion. The proposed model and algorithm are implemented, and validated by applying them to the ACM/SIGDA benchmark designs. The output state of a gate in an FPSLA needs to be duplicated so that each fanout gate can be connected to a dedicated copy. This property has been taken into account by merging the duplicated nets into a hyperedge, and then, splitting the hyperedge into edges as the optimization progresses. This yields additional 18.4% of the cell count reduction in the most dense logic stage. The practicality of the FPSLA can be further enhanced primarily by incorporating into the logic synthesis the constraint to avoid the concentrated fains of gates on some logic stages. In addition, an efficient algorithm needs to be devised for the routing problem which is based on a complicated graph. The graph models the nanowire crossbar which is trimmed to be embedded into the FPSLA fabric, and therefore, asymmetric. These CAD tools can be used to evaluate the fabric efficiency during the architecture enhancement as well as automate the design.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.4
• /
• pp.24-31
• /
• 2007

Up to date, a lot of bus protocol and bus architecture are released though most of them are based on the shared bus architecture and inherit the limitation of performance. SNP (SoC Network Protocol), and hence, SNA (SoC Network Architecture) which are high performance on-chip-bus protocol and architecture, respectively, have been proposed to solve the problems of the conventional shared bus. We refine the SNA specification and improve the performance and functionality. The performance of the SNA is improved by supporting simultaneous routing for bus request of multiple masters. The internal routing logic is also improved so that the gate count is decreased. The proposed SNA employs XSNP (extended SNP) that supports almost perfect compatibility with AMBA AHB protocol without performance degradation. The hardware complexity of the improved SNA is not increased much by optimizing the current routing logic. The improved SNA works for IPs with the original SNP at its best performance. In addition, it can also replace the AMBA AHB or interconnect matrix of a system, and it guarantees simultaneous multiple channels. That is, the existing AMBA system can show much improved performance by replacing the AHB or the interconnect matrix with the SNA. Thanks to the small number of interconnection wires, the SNA can be used for the off-chip bus system, too. We verify the performance and function of the proposed SNA and XSNP simulation and emulation.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.6
• /
• pp.532-540
• /
• 2010

The strength properties of wooden model retaining wall made of pitch pine (Pinus rigida Miller) was evaluated. Three different types of wooden model retaining wall were made of the 11cm square timber treated with CUAZ-2 (Copper Azole). The retaining wall was made into the 4 layers of crossbar and the 3 layers of vertical-bar, of which the size was 86 cm high, 200 cm long and 96 cm wide. Type I was control and in Type II 20 cm vertical-bars and 93 cm vertical-bars were arranged alternately to decrease wood usage. TypeIII was similar to TypeII except that the connection between crossbars was reinforced with the wooden armature. In each type, the strength properties of retaining wall were investigated by horizontal loading test and the deformation of structure by image processing (AICON 3D DPA-PRO system). In horizontal loading test of Type I, Type II and Type III was 63.17, 57.80, and 60.97 kN/m, respectively. The deformation of the top layer in Type II was 1.5 times larger than in Type I and Type III. Consequently, the economic efficiency and strength performance were better in Type III than in Type I and Type II.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.8
• /
• pp.554-561
• /
• 2006

In recent years, as SoC design research is actively conducted, a large number of IPs are included in a system. Various bus protocols and bus architectures are designed to increase IP reusability. Among them, the AMBA AHB became a de facto standard although it is somewhat inadequate for a large scale SoC. We proposed SNP and SNA, high performance on-chip-bus protocol and architecture, respectively, to solve the problem of the conventional shared buses. However, it seems to be imperative that the new on-chip-bus system support AMBA-compatible IPs for a while since there are a lot of IPs with AMBA interface. In this paper, we propose an extended SNP specification and a corresponding SNA component to support ABMA-compatible IPs used in SNA - based system. We extend the phase of the SNP by 1 bit to add new 8 phases to support communication based on AMBA protocol without penalty of elongated cycle latency. The ARB-to -XSNP converter translates the protocol between AHB and SNP to attach AMBA -compatible IPs to SNA based system. We show that AMBA IPs can communicate through SNP without any degradation of performance using the extended SNP and AHB - to- XSNP converter.

• Archives of design research
• /
• v.2 no.1
• /
• pp.43-62
• /
• 1989

The luxury is the expression of human being's ornament instinct. In this study, in order to grasp the moulding system of the Korean's personal ornaments, the process of luxury prohibition was reviewed to search for to which direction the ornaments developed in the frame of the prohibited style connected closely to the character of the personal ornaments. The proiod was fixed from the old society to the late Chosun dynasty era. The beginning of the luxury in Korea seems to be the start of the luxury burial at the time of funeral in the age of Koguryo., In the era of Koguryo, 10th year of King Dongmyung (B. C. 28), in the era of Baekje, 27th year of King Koi(260), the prohibition of dress regulation and the style of dress were conducted. The prohibition of personal ornaments in Silla was started from King Bup:Heung, and in the 9th year of King Heung-Duk, the prohibition was conducted in order to correct the luxury of the nobles and set up the social discipline. In the 11 th of King Il-Sung-Ni-Sa-Kum, the use of gold, silver and jade was prohibited in the civilian circles. The prohibition of Silla was succeeded to Koryo era, and in the 7th year of King Kwangjong(956), the system of Baekgwan Gongbok(uniform for government officials) was set up, and the system of Sasek Gongbok(four color official uniform) was set up in the 11 th year of the same King, and the prohibition of the personal ornaments such as crown and band is considred to have been conducted. The prohibition of gold and silver was conducted in the first year of King Sungjong(982), and in the 4th year of King Chungryul(l260), the order of wearing the dress and hat in accordance with the Yusan dynasty and the Mongolian customs were widely circulated in the royal court and vivilian circles. The strong influence of Mongolia made the taste of the traditional personal ornaments laste. The personal ornaments were used for the nobles until the age of the Unified Sillar but even the common people could use them in case they were rich, and such a circumstances made the use of foreign goods inflated. The prohibition of Koryo era was aimed at the prohibition of the foreign goods of luxury, and the classification of the social status.In the age of Chosun Dynasty, the production of gold and silver was feeble indeed but the oute reason of the prohibition was to eradicate the luxurious tendency, elevate the custom of eradicate the luxurious tendency, elevate the custom of thrift, and moreover, the gold, silver and jade were no the products of Korea and the prohibition was conducted but the true reason was afor the tribute tt China and the classification of status. The prohibition of Chosun dynasty was conducted first in the June of the 3rd year of King Taejo The major contents of prohibition was no use of gold, silver and jade, coral, agate, amber, etc. of th, wives of the Dang-Sang-Kwan (Court Nobleman) or their sons and daughters, and the same pheno menon was common even at the time of marriage. The people engaged in the secret trade there of wert beheaded. The personal ornaments in the prohibition were the pendent trinket, Binyo (crossbar) ceremonial ornamental hat, ring, earring, ornamental knife, hat string, hat ornament, belt, etc. Thl luxurious marriage expenses out of the luxury was severe, and lose of the marriageable age because 0 non-preparing the marriage goods was the national evil. The prohibition oC luxury was hard to bt kept to the nobles or rich people, the same as old days and present days. The prohibition of th{ luxury and personal ornaments of Korea had nothing to do with the commons, and it was limited tc the nobles and rich people. The prohibition was aimed to cultivating the custom of frugality by eradicating the luxurious atmosphere, but it was chiefly due to the tribute to the China and tht discrimination of the. status. We can say that the recent personal ornament was the flower of handi craft industry bloomed in the prohibition and regulation.