• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2001년도 추계학술대회 논문집(Proceeding of the KOSME 2001 Autumn Annual Meeting)
• /
• pp.21-27
• /
• 2001

Springs are widely utilized in machine element. To find out stiffness of frustum-shaped coil spring, the space beam theory using the finite element method is adopted in this paper In three dimensional space, a space frame element is a straight bar of uniform cross section which is capable of resisting axial forces, bending moments about two principal axes in the plane of its cross section and twisting moment about its centroidal axis. The corresponding displacement degrees of freedom are twelve. To find out load vector of coil spring subjected to distributed compression, principle of virtual work is adapted The displacements of nodal points due to small increment of force are calculated by the finite element method and the calculated nodal displacements are added to coordinates of nodal points. The new stiffness matrix of the system using the new coordinates of nodal points is adopted to calculate the another increments of nodal displacements, that is, the step by step method is used in this paper. The results of the finite element method are fairly well agreed with those of various experiments. Using MATLAB program developed in this paper, spring constants and stresses can be predicted by input of few factors.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권2호
• /
• pp.250-255
• /
• 2008

Springs are widely utilized in machine element. To find out stiffness of frustum-shaped coil spring, the space beam theory using the finite element method is adopted in this paper. In three dimensional space, a space frame element is a straight bar of uniform cross section which is capable of resisting axial forces, bending moments about two principal axes in the plane of its cross section and twisting moment about its centroidal axis. The corresponding displacement degrees of freedom are twelve. To find out load vector of coil spring subjected to distributed compression. principle of virtual work is adapted. And this theory was programming using MATLAB software. To compare FEM using MATLAB software was applied MSC. Nastran software. The geometry model for MSC. Patran was produced by 3-D design modeling software. Finite element model was produced by MSC. Patran. Finite element was applied tetra (CTETRA) having 10 node. The analysis results of the MATLAB and MSC. Nastran are fairly well agreed with those of various experiments. Using MATLAB program proposed in this paper and MSC. Nastran, spring constants and stresses can be predicted by input of few factors.

• Steel and Composite Structures
• /
• 제41권6호
• /
• pp.887-898
• /
• 2021

This paper presents a simplified model to capture the nonlinear behavior of steel frames depending on the spread of plasticity method. New interaction formulae were derived to evaluate the plastic strength for I-shaped steel sections under uniaxial bending moment and axial compression load. Also, new empirical formulae were derived to evaluate the tangent stiffness modulus of steel I-shaped cross-sections considering the effect of the residual stresses suggested by the specifications in European Convention for Construction Steelworks (ECCS). The secant stiffness which depends on the tangent modulus is used to evaluate the internal forces. Based on stiffness matrix method, a finite element analysis program was developed for the nonlinear analysis of space steel frames using the derived formulae. Comparison between the proposed model results with those given by the fiber model shows very good agreement. Numerical examples were introduced to verify, check the accuracy, and evaluate the efficiency of the proposed model. The analysis results show that the new proposed model is accurate and able to minimize the solution time.

• 건축역사연구
• /
• 제5권1호
• /
• pp.73-86
• /
• 1996

This study is to analyze the geometrical composition system for the plan of S. Pietro by Michelangelo. In the result of study, the plan is based on the geometrical elements of circle square cross, and shaped to symbolize the Universe which consists of the Heaven the Earth the Man. The plan is constituted of the conception of composition into hierarchy and repetition intersecting 45 degree the same sized square with inscribed square in a circle. Such the geometrical composition system can be found out a large number of example to the geometrical composition of architecture and city planning from Vitruvius to Bramante and Da Vinci. This plan is disposed in balance as the regularly proportional system of 1:1, 1:2, 1:3, which is formed the principal space. And the interior space is constituted of the organic space system, expanding to the direction of horizontal, vertical(ascension), development for primary space and secondary space with center in the geometric composition system of altar.

• International Journal of Aeronautical and Space Sciences
• /
• 제14권4호
• /
• pp.398-407
• /
• 2013

Optical tomography was used to measure the pattern of spray cross-section. The maximum-likelihood estimation (MLE) algorithm was used to reconstruct the spray cross-section from the measured transmission rate of the spray. A swirl-type injector was used to form an optically dense spray, and the test was carried out in a high-pressure chamber, to control the pressure condition of the test site. Before the experiment, the reliability of the MLE-based reconstruction algorithm was verified, by comparing it with a conventional filtered back projection reconstruction (FBP) method. The MLE algorithm showed superior reconstruction of the image. In the spray patternation experiment, the results of the optical tomography and optical line patternator, which uses Mie scattering signal information, were compared. While measuring the cross-section of optically dense spray, the intensity of the scattering signal had attenuated to an uncorrectable level, which led to incorrect spray pattern measurement by the optical line patternator. However, reliable results were obtained by optical tomography, under the same condition. Finally, the pattern of the optically dense spray was measured at various chamber pressures, of up to 3 MPa. As the chamber pressure increased, the hollow cone-shaped swirl spray shrank, and the attenuation coefficient value of the inner region increased.

• 연구논문집
• /
• 통권24호
• /
• pp.49-61
• /
• 1994

In this paper, the experimental unit of the cross inductive radio line and two linear induction motors driven by IGBT inverter for train control was made. In actual condition, the track has straight line, but so as to be able to achieve in small space, the unit prepared was shaped into two circular plates. Then by detecting inductive signal, the position data could be obtained. Also the equipment representing speed and thrust of LIM and train position by means of the experimantal unit could be composed.

• 폴리머
• /
• 제25권5호
• /
• pp.754-758
• /
• 2001

Vesicle을 단량체가 중합 반응을 할 수 있는 장소로 사용하기 위하여, vesicle 내의 소수성부분에 단량체와 가교제를 집어넣었다. 즉 dimethyldioctadecylammonium bromide를 증류수 속에서 초음파 분산을 하여 vesicle을 만든 후, 여기에 styrene과 divinylbenzene을 첨가한 다음 AIBN으로 중합시켰다. 형성된 고분자는 남겨두고 vesicle을 형성하였던 계면활성제들을 모두 에탄올로 추출해서 제거하여 순수 고분자로 이루어진 구형의 구조물을 얻었다. 그리고 methyl methacrylate와 ethylene glycol dimethacrylate를 이용해서도 고분자로 이루어진 구형의 구조물을 합성하였다.

• 한국전자파학회논문지
• /
• 제27권6호
• /
• pp.491-494
• /
• 2016

본 논문에서는 준등각 맵핑 기반 전자기파 투명화 구조의 산란 단면적(Scattering Cross Section: SCS)을 최소화 시키는 설계 방법을 제시한다. 준등각 맵핑에 기반하여 설계한 전자기파 투명화 구조를 사각형 형태로 잘라낸 뒤 경계면 밖의 굴절률과 내부의 1미만인 굴절률을 자유 공간으로 근사하는 방법을 사용함으로써 구현하기 어려운 굴절률 문제를 해결하였다. 사각형 형태의 크기는 시뮬레이션을 통해 전자기파 투명화 구조를 적용한 마름모형 금속 물체의 산란 단면적이 최소가 되도록 최적화하였다. 설계된 자유 공간형 전자기파 투명화 구조를 3D 프린터를 이용하여 제작, 산란파 저감 특성을 전자기장 스캐너를 이용하여 실험적으로 검증하였다.

• 한국통신학회논문지
• /
• 제28권3A호
• /
• pp.166-170
• /
• 2003

In this paper, the characteristics of Koch island microstrip patch antenna are investigated by numerical and experimental methods. The Koch patch is fractal shaped antenna which can be characterized by two properties such as space-filling and self-similarity. Due to its space-filling property of fractal structure, the proposed Koch fractal patch antennas are smaller in size than that of conventional square patch antenna. From numerical and experimental results, it is found that as the iteration number and iteration factor of Koch patch increase, its resonance frequency becomes lower than that of conventional patch, thus contributes to antenna size reduction. In particular, when the fractal iteration factor is 1/4, the fractal antenna is 45% smaller in size than that of conventional patch, while maintaining radiation patterns comparable to those of rectangular antenna and cross polarization level is about -20~-14 dB.

• 헤리티지:역사와 과학
• /
• 제42권2호
• /
• pp.86-109
• /
• 2009

미륵사는 백제 무왕(재위 600~641)이 창건한 사찰로 이와 관련한 창건 기록이 "삼국유사(三國遺事)" 기이(紀異) 제이(第二) 무왕조(武王條)에 언급되어 있다. 서원의 미륵사지서탑은 해체 전 6층까지의 일부가 남아있었으며 미륵사지 내의 유일한 현존 건축물로서 최근 사리장엄 발견으로 639년이라는 건립연대가 밝혀졌다. 또한 백제 사찰의 발굴조사 자료가 축적되고 동아시아의 학술적 교류가 활발해지면서 미륵사지서탑의 조영을 당시 불탑 건축의 발전 과정과 연관시켜 해석할 수 있는 가능성이 한층 높아졌다. 따라서 본 연구에서는 미륵사지서탑의 축조에 적용된 구조원리와 1층 평면의 형성을 중심으로 6~7세기 불탑 건축의 발전과정에 있어서 대형의 불탑건축이 어떻게 이루어졌는지에 관한 기초적 연구를 시도하였다. 연구 결과는 다음과 같다. 첫째, 미륵사지서탑은 내부와 외부가 독립적인 개념으로 축조되었는데 이는 당시의 고층 불탑건축에서 나타나는 구조원리의 표현으로 보여진다. 영녕사 목탑지에서 확인된 탑실심체와 같이 내부의 구조체를 형성하는 개념과 유사하게 내부 적심을 형성하고 외부 부재를 부가하는 방식으로 축조된 것이라 판단된다. 둘째, 미륵사지서탑에서는 상부의 적심부와 동시에 심주석이 동시에 존재하는 혼합 구조를 표현하고 있는데 이는 중국의 영녕사 목탑과 같은 실심체의 구조보다 발전된 것으로 조팽성 불사의 심초석과 항토 실심체의 구조와 유사한 것으로 판단된다. 이러한 혼합 구조는 황룡사 목탑이나 일본의 목탑과 같이 내외진을 전부 목구조로 형성하고 심주가 독립적으로 지지되는 구조 방식보다 선행되는 것으로 볼 수 있다. 셋째, 미륵사지서탑의 경우 1층에 십자형의 공간이 형성된 것은 심주석에 위치한 사리 봉안에 의한 것일 가능성이 높다. 이는 심주석을 중심으로 하는 4방향의 구심적 공간이며 사리의 본질적 의미에 기인하여 백제 6~7세기의 횡혈식 석실분과 유사한 방식으로 축조되었다. 횡혈식 석실분의 축조기법은 사리가 봉안되어 있는 상징적 공간을 효과적으로 표현하기 위한 방법인 동시에 석재를 사용하여 축조된 서탑에 있어서 재료적 동일성으로 인하여 수용이 더욱 용이하였던 것으로 추정된다.