• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2001.11a
• /
• pp.21-27
• /
• 2001

Springs are widely utilized in machine element. To find out stiffness of frustum-shaped coil spring, the space beam theory using the finite element method is adopted in this paper In three dimensional space, a space frame element is a straight bar of uniform cross section which is capable of resisting axial forces, bending moments about two principal axes in the plane of its cross section and twisting moment about its centroidal axis. The corresponding displacement degrees of freedom are twelve. To find out load vector of coil spring subjected to distributed compression, principle of virtual work is adapted The displacements of nodal points due to small increment of force are calculated by the finite element method and the calculated nodal displacements are added to coordinates of nodal points. The new stiffness matrix of the system using the new coordinates of nodal points is adopted to calculate the another increments of nodal displacements, that is, the step by step method is used in this paper. The results of the finite element method are fairly well agreed with those of various experiments. Using MATLAB program developed in this paper, spring constants and stresses can be predicted by input of few factors.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.2
• /
• pp.250-255
• /
• 2008

Springs are widely utilized in machine element. To find out stiffness of frustum-shaped coil spring, the space beam theory using the finite element method is adopted in this paper. In three dimensional space, a space frame element is a straight bar of uniform cross section which is capable of resisting axial forces, bending moments about two principal axes in the plane of its cross section and twisting moment about its centroidal axis. The corresponding displacement degrees of freedom are twelve. To find out load vector of coil spring subjected to distributed compression. principle of virtual work is adapted. And this theory was programming using MATLAB software. To compare FEM using MATLAB software was applied MSC. Nastran software. The geometry model for MSC. Patran was produced by 3-D design modeling software. Finite element model was produced by MSC. Patran. Finite element was applied tetra (CTETRA) having 10 node. The analysis results of the MATLAB and MSC. Nastran are fairly well agreed with those of various experiments. Using MATLAB program proposed in this paper and MSC. Nastran, spring constants and stresses can be predicted by input of few factors.

• Steel and Composite Structures
• /
• v.41 no.6
• /
• pp.887-898
• /
• 2021

This paper presents a simplified model to capture the nonlinear behavior of steel frames depending on the spread of plasticity method. New interaction formulae were derived to evaluate the plastic strength for I-shaped steel sections under uniaxial bending moment and axial compression load. Also, new empirical formulae were derived to evaluate the tangent stiffness modulus of steel I-shaped cross-sections considering the effect of the residual stresses suggested by the specifications in European Convention for Construction Steelworks (ECCS). The secant stiffness which depends on the tangent modulus is used to evaluate the internal forces. Based on stiffness matrix method, a finite element analysis program was developed for the nonlinear analysis of space steel frames using the derived formulae. Comparison between the proposed model results with those given by the fiber model shows very good agreement. Numerical examples were introduced to verify, check the accuracy, and evaluate the efficiency of the proposed model. The analysis results show that the new proposed model is accurate and able to minimize the solution time.

• Journal of architectural history
• /
• v.5 no.1 s.9
• /
• pp.73-86
• /
• 1996

This study is to analyze the geometrical composition system for the plan of S. Pietro by Michelangelo. In the result of study, the plan is based on the geometrical elements of circle square cross, and shaped to symbolize the Universe which consists of the Heaven the Earth the Man. The plan is constituted of the conception of composition into hierarchy and repetition intersecting 45 degree the same sized square with inscribed square in a circle. Such the geometrical composition system can be found out a large number of example to the geometrical composition of architecture and city planning from Vitruvius to Bramante and Da Vinci. This plan is disposed in balance as the regularly proportional system of 1:1, 1:2, 1:3, which is formed the principal space. And the interior space is constituted of the organic space system, expanding to the direction of horizontal, vertical(ascension), development for primary space and secondary space with center in the geometric composition system of altar.

• International Journal of Aeronautical and Space Sciences
• /
• v.14 no.4
• /
• pp.398-407
• /
• 2013

Optical tomography was used to measure the pattern of spray cross-section. The maximum-likelihood estimation (MLE) algorithm was used to reconstruct the spray cross-section from the measured transmission rate of the spray. A swirl-type injector was used to form an optically dense spray, and the test was carried out in a high-pressure chamber, to control the pressure condition of the test site. Before the experiment, the reliability of the MLE-based reconstruction algorithm was verified, by comparing it with a conventional filtered back projection reconstruction (FBP) method. The MLE algorithm showed superior reconstruction of the image. In the spray patternation experiment, the results of the optical tomography and optical line patternator, which uses Mie scattering signal information, were compared. While measuring the cross-section of optically dense spray, the intensity of the scattering signal had attenuated to an uncorrectable level, which led to incorrect spray pattern measurement by the optical line patternator. However, reliable results were obtained by optical tomography, under the same condition. Finally, the pattern of the optically dense spray was measured at various chamber pressures, of up to 3 MPa. As the chamber pressure increased, the hollow cone-shaped swirl spray shrank, and the attenuation coefficient value of the inner region increased.

• 연구논문집
• /
• s.24
• /
• pp.49-61
• /
• 1994

In this paper, the experimental unit of the cross inductive radio line and two linear induction motors driven by IGBT inverter for train control was made. In actual condition, the track has straight line, but so as to be able to achieve in small space, the unit prepared was shaped into two circular plates. Then by detecting inductive signal, the position data could be obtained. Also the equipment representing speed and thrust of LIM and train position by means of the experimantal unit could be composed.

• Polymer(Korea)
• /
• v.25 no.5
• /
• pp.754-758
• /
• 2001

In order to use vesicle as a space of polymerization, monomer and cross-linking agent were put into hydrophobic part of vesicle. The vesicle solution of dimethyldioctadecylammonium bromide was formed by ultrasonication. Styrene and divinylbenzene were put into this solution and polymerization was conducted by adding AIBN. The polymer with sphere-shaped structure was obtained by removing all of the surfactant by extraction of ethanol And using methyl methacrylate and ethylene glycol dimethacrylate, this sphere-shaped polymer structure was also formed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.6
• /
• pp.491-494
• /
• 2016

A design method is proposed to minimize the scattering cross section(SCS) of the electromagnetic cloak based on the quasi-conformal mapping. Often times in such cloaking structures, parts that require refractive index below one are approximated with free space because of the difficulty involved with realization. In this process, preformance degradation is inevitable. In this work, the size of the cloak is optimized to compensate for the deterioration, and thus to minimize the scattering cross section of a diamond shaped conductor. Proposed cloak is fabricated using a 3D printer, and verified by measuring the cloaking performance of a diamond shaped aluminum target.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.3A
• /
• pp.166-170
• /
• 2003

In this paper, the characteristics of Koch island microstrip patch antenna are investigated by numerical and experimental methods. The Koch patch is fractal shaped antenna which can be characterized by two properties such as space-filling and self-similarity. Due to its space-filling property of fractal structure, the proposed Koch fractal patch antennas are smaller in size than that of conventional square patch antenna. From numerical and experimental results, it is found that as the iteration number and iteration factor of Koch patch increase, its resonance frequency becomes lower than that of conventional patch, thus contributes to antenna size reduction. In particular, when the fractal iteration factor is 1/4, the fractal antenna is 45% smaller in size than that of conventional patch, while maintaining radiation patterns comparable to those of rectangular antenna and cross polarization level is about -20~-14 dB.

• Korean Journal of Heritage: History & Science
• /
• v.42 no.2
• /
• pp.86-109
• /
• 2009

Mireuksa Temple was founded during the reign of King Mu of Baekje(AD 600-641). The circumstance of the construction of this temple is documented in "Memorabilia of the Three Kingdoms (Samgukyusa)". The pagoda named stone pagoda at Mireuksaji temple stands outside the main sanctuary of the western area. The south and west sides of the stone pagoda have completely collapsed, leaving only the eastern facade of six of its levels intact. Through the recent discovery of sarira reliquary we can see that the erection of this pagoda was in 639. So owing to accumulation of excavation results about Baekje temple site and vigorous academic exchange, it is possible that architecture of western pagoda at Mireuksaji temple can be understood in connection with the architectural development of wooden pagoda from 6th to early 7th century in East Asia. So this study is on the consideration of building of this pagoda putting first structure of upper part and cross-shaped space in 1st floor. It was considered that the material characteristics as stone could be applied to the temple pagoda architecture of large scale. The results are as follows. First, it had been built in recognition that the outer and inner part of pagoda should be separated. As it is the expression of structural system in temple pagoda architecture of large scale at that time. In pagoda there was a self-erected structure and the members of outer part of it were constructed additionally. Second, in Mireuksaji stone pagoda there is central column with stones. With inner part of pagoda it can be regarded as mixed structural system that constitutes central contral column and inner structural part. And it could be a kind of middle step to more developed structure of whole as wooden pagodas in Japan. Third, as the sarira reliquary was in central column on the first floor, the cross-shaped space could be made. The formation of this space was so on the natural meaning of sarira that the concept as memorial service of graves could be apllied to the pagoda. The style of tomb in Baekje was expressed to the space of 1st floor in pagoda where Sarira had been mstalled. That was not only effective presentation of symbolic space but also easier method in the use of same material.