• Fibers and Polymers
• /
• 제5권3호
• /
• pp.182-186
• /
• 2004

The effect of braid construction parameters on yarn cross-sectional shape is presented in this paper. The location of the yam within the braid unit cell is quantified by a compaction factor. A range of braided fabrics were produced and optically measured for actual yarn cross-sectional shape. A comparison of the theoretical and experimental values shows good correlation. Design curves can be produced with the developed model to allow selection of appropriate braid process parameter to create yarns with desired cross-sectional geometries.

• 한국화재소방학회논문지
• /
• 제25권6호
• /
• pp.83-88
• /
• 2011

본 연구에서는 전기기기 및 가전기기 등의 배선으로 사용되는 비닐코드의 구조 및 특성을 제시하고, 에너지원의 종류에 따라 소손된 비닐평형코드(VFF, $1.25mm^2$)의 실체 사진 및 용융된 도체의 금속 단면 구조를 분석하였다. 정상 VFF는 소선 여러 가닥을 꼬아서 제작되었으며, 도체의 표면은 적갈색이다. 또한 도체의 금속 조직 분석에서 그레인이 연신된 것을 알 수 있었다. 일반 화염에 의해 소손된 VFF의 표면은 절연물이 탄화되어 도체의 표면에 융착되었고, 윤기가 없는 것을 알 수 있었다. 또한 용융 부분의 단면 구조 분석에서 일정한 모양의 보이드가 형성되었고, 전선 고유의 연신 구조는 확인할 수 없었다. 통전중인 VFF에 외부 화염이 인가되어 소손된 용융 도체의 단면 분석에서 전선 고유의 연신 구조는 없었고, 불규칙적인 보이드 및 주상 조직 등이 성장한 것을 알 수 있었다. 과전류에 의해 소손된 VFF는 표면이 고르게 탄화되었으며, 용융된 도체의 단면 구조 분석에서 수지상 조직의 성장이 확인되었다. 단락에 의해 용융된 VFF의 특성 분석에서 표면의 일부가 오염되었지만 약간의 윤기가 있고, 용융되어 재결합한 부분이 둥근 모양을 나타냈다. 또한 금속 현미경을 이용한 단면 구조 분석에서 경계면 및 주상 조직 등이 확인되었고, 용융된 도체 이외의 부분에서는 정상 구리와 같은 비정질체인 구조가 확인되었다.

• 한국가시화정보학회지
• /
• 제14권2호
• /
• pp.18-24
• /
• 2016

This paper presents an experimental investigation to visualize cross-sectional two-phase flow structure and identify liquid-gas interface for condensation of steam at a low mass flux in a slightly inclined tube using the axial-viewing technique, which permits to look directly into flow during condensation of steam. In this technique, two-phase flow is viewed along the axis of a pipe by locating a high-speed video camera in front of a viewer that is fitted at the outlet of the pipe. A short section of the pipe is illuminated and is recorded through the viewer, which is kept free of liquid by mildly introducing air. Experiments were conducted in a pipe of 19.05 mm in inner diameter at atmospheric pressure. Cross-sectional two-phase flow structure is obtained at a steam mass flux of $2.62kg/m^2s$ as a function of steam quality in the range from 0.5 to 0.9. The results show that stratified-wavy flow is a unique flow pattern observed in the scope of the present study. Condensate film thickness, stratification angle and void fraction were measured from the obtained flow structure images. Finally, heat transfer coefficient was calculated using the measurement data and discussed in comparison with existing correlations.

• 한국정밀공학회지
• /
• 제27권4호
• /
• pp.102-108
• /
• 2010

Projection microstereolithography is a process of fabricating a micro-structure by using dynamic mask such as digital micromirror device(DMD). DMD shapes the beam into cross-sectional image of structure. Photocurable resin is cured by the beam and stacked layer on top of layer. It is difficult to deliver the beam from the DMD to the photocurable resin without any distortions. We assume that the beam exposed to the resin by 1 pixel of DMD has Gaussian distribution, so the shaped beam reflected by the DMD affects its neighboring area. Curing pattern corresponding to a cross-sectional images is predicted by superposition of pixels of Gaussian distribution and it is similar to cured shape.

• Structural Engineering and Mechanics
• /
• 제37권3호
• /
• pp.309-320
• /
• 2011

As a new type of large-span space structure, suspendome is composited of the upper single-layer reticulated shell and the lower cable-strut system. It has better mechanical properties compared to single-layer reticulated shell, and the overall stiffness of suspendome structure increases greatly due to the prestress of cable. Consequently, it can cross a larger span reasonably, economically and grandly with high rigidity, good stability and simple construction. For a better assessment of the advantages of mechanical characteristic of suspendome quantitatively, the static behavior of Kiewitt6 suspendome was studied by using finite element method, and ADINA was the software application to implement the analysis. By studying a certain suspendome, the internal forces, deformation and support constrained forces of the structure were obtained in this paper. Furthermore, the influences of parameters including prestress, stay bar length, cross-sectional area and rise-to-span ratio were also discussed. The results show that the increase of prestress and vertical stay bar length can improve the stiffness of suspendome; Cross-sectional area has nearly no impact on the static behavior, and the rise-to-span ratio is the most sensitive parameter.

• 로봇학회논문지
• /
• 제17권4호
• /
• pp.493-499
• /
• 2022

This paper presents the design for the kinematic structure of a system for an automatically moored 6000 ton autonomous ship in a port, and the process and results of optimal design for the link cross-sectional shape. We propose an automatic mooring system with a PPP type serial manipulator structure capable of linear motion in the XYZ axis. The mooring force applied by the mooring system was derived with dynamics simulation tool "ADAMS". The design goal is the minimization of the cross-sectional area of the link. Constrains include compressive stress and shear stress. The optimization problems were solved by using the sequential quadratic programing method implemented in the fmincon package. The shape of the cross section was assumed to be rectangle. Through future research, we plan to manufacture automatic mooring system for 6000ton class autonomous ship.

• 대한건축학회논문집:구조계
• /
• 제36권2호
• /
• pp.145-153
• /
• 2020

The purpose of this study is to investigate the effects of composition of underground structural wall and H-pile in soil cement. The results of previous experimental studies are re-analyzed and the nonlinear cross-sectional analyses of composite basement walls are performed to verify their nonlinear flexural behavior. Based on the study, it is explained how the gap deformation between H-Pile and RC wall should be considered in the design of flexure of composite underground walls. The nonlinear cross-sectional analysis shows that the load-displacement curves of composite basement wall specimens exhibiting flexural behavior exist between the results of the analysis of the complete and non-composite cases. When predicting the behavior of the composite basement wall by nonlinear cross-sectional analysis, the flexural behavior of the composite basement wall could be suitably predicted by considering the reduction of the composite ratio due to tensile stress acting on shear connectors.

• Composites Research
• /
• 제28권4호
• /
• pp.204-211
• /
• 2015

본 논문에서는 블레이드와 같이 세장비가 크고 초기 비틀림이 존재하는 복합재료로 구성된 날개 구조물에 대한 이차원 단면의 차원축소와 복원관계를 이론적으로 기술하고 이를 이용한 복합재료 로터 블레이드의 효율적인 설계 과정을 기술하였다. 차원축소와 복원해석 수치해석 프로그램인 VABS를 이용하여 단면해석을 수행하고 연성이 고려된 강성행렬과 질량행렬을 중립점에 연결하여 블레이드의 특성을 포함한 1차원 보 모델링을 구성하였다. 1차원 보 모델을 통해 블레이드의 거동을 확인하고 내부하중을 계산하여 단면위치에서 변형률 복원을 수치적으로 계산하고 이산화 된 단면에 수치적으로 매칭하여 시각적으로 형상화하였다.

• 펄프종이기술
• /
• 제44권4호
• /
• pp.16-24
• /
• 2012

To characterize the coating structure, diverse methods such as mercury intrusion, nitrogen adsorption and oil absorption methods have been developed and widely employed. These indirect techniques, however, have some limitation to explain the actual coating structure. Recently microscopic observation methods have been tried for analyzing structural characteristics of coating layers. Preparation of the undamaged cross section of a coating layer is essential for obtaining high quality image for analysis. In this study, distortion-free cross-section of the coating layer was prepared using a grinding and polishing technique. The coated paper was embedded in epoxy resin and cured. After curing the resin block it was ground with abrasive papers and then polished with diamond particle suspension and nylon cloth. Polished coating layer was sufficient enough to obtain undamaged cross sectional images with scanning electron microscope under backscattered electron image mode. In addition, the SEM images allowed distinction of the coating layer components. Also S/B latex film formed between pigment particles was visualized by osmium tetroxide staining. Pore size distribution and pore orientation were evaluated by image analysis from SEM cross-sectional images.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.35.1-35
• /
• 2001

The aim of our study is to automatically analyze how textile is woven which has complicated structure, such as textile with multi-layer structure. For this purpose, we propose a method to reconstruct a textile structure of a textile is visualized. Then, the anteroposterior sections of the same yarn on the cross sectional images is associated each other by superimposing them. Therefore, by this method, 3-D information of each yarn is obtained and the 3-D shape of each yarn is independently expressed. In this research, a 3-D reconstruction of a plain weave fabric is performed.