• Journal of Welding and Joining
• /
• 제25권5호
• /
• pp.64-71
• /
• 2007

The aim of this paper is to investigate the effects of welding parameters on the weld shape in seal-welding of STS304L capsule for manufacturing a radioisotope source which is widely used in nondestructive testing of metal structures using gamma ray. Pulsed gas tungsten arc (Pulsed GTA) welding is performed for thin cross sectional area of the capsule. Seven welding parameters including current waveform parameters and arc length etc. are selected as main process parameters using design of experiment. The weld shape such as bead width, penetration depth, weld area, aspect ratio and area rate is investigated to assess the effects of welding parameters. As results, the combination of pulse duty/welding speed largely affects on bead width, penetration depth, area and aspect ratio. Finally, it is concluded that the key parameters are the combination of pulse duty/welding speed, base current and arc length, and their optimal conditions are 50%/1.77mm/s, 6.4A and 1 mm.

• 한국해양환경ㆍ에너지학회지
• /
• 제8권2호
• /
• pp.67-73
• /
• 2005

부방파제의 특성을 간단히 검토하고 수치해법을 이용하여 소파성능을 분석하였다. 비점성 포텐셜 유동의 일반적인 해법인 경계면적분법을 사용하였고, 다양한 형상의 부방파제 2차원 단면특성을 투과율을 중심으로 살펴보았다. 계류계의 강도와 질량관성반경 및 흘수의 영향을 기본적인 폰툰 형태에 대하여 고찰하였고, 사다리꼴, 중절모형상, 탁자 형상 등의 단면에 대하여 형상에 변화를 주며 소파특성을 조사하였다. 각 단면마다 효과적인 소파가 기대되는 입사파의 파장이 달라지지만 입사파의 파장과 부체의 길이비가 10 이상이 되는 경우까지 만족스런 소파가 이루어지는 경우도 있다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.1487-1501
• /
• 2011

Recently, fast-growing up railway transportations. Because, regional traffic congestion problem solving and a period of rapid expansion to meet the demand of industries. In addition the government also suggest to new paradigm for the future 'Low Carbon, Green Growth' is presented as a new national vision. To meet the social needs and the time demands, Last of the railway increase very long tunnels and huge deep tunnels. Especially this trend accelerated high speed up in the tunnel, the revision of design criteria and research challenges are being actively improved. Mainly in the tunnel cross-section was under the control of the vehicle train speed 150km/hr by the construction of the vehicle cross-section of the tunnel. More than 200km/hr rail tunnel depending on the vehicle's speed caused the tunnel to the pressure fluctuations will be governed by the aerodynamic changes. Considering the economy to ensure the optimum cross-section of the railway tunnel to the description scheme is selected cross-section of the railway tunnel to determine the size domestic or international railway tunnel for the elements((based on fast Algorithm design criteria, the center line spacing, streetcar line, cross-sectional shape, sectoral issues, such as interface and aerodynamics) based on design practices and to review results. In this study, to propose guidelines depending on the size of a railway tunnel cross section for the size of the determining reasonable factors when designing the railway tunnel and cost-effective standards guidelines.

• 대한치과교정학회지
• /
• 제43권4호
• /
• pp.160-167
• /
• 2013

Objective: To evaluate the shapes and sizes of nasopharyngeal airways by using cone-beam computed tomography and to assess the relationship between nasopharyngeal airway shape and adenoid hypertrophy in children. Methods: Linear and cross-sectional measurements on frontal and sagittal cross-sections containing the most enlarged adenoids and nasopharyngeal airway volumes were obtained from cone-beam computed tomography scans of 64 healthy children ($11.0{\pm}1.8$ years), and the interrelationships of these measurements were evaluated. Results: On the basis of frontal section images, the subjects' nasopharyngeal airways were divided into the following 2 types: the broad and long type and the narrow and flat type. The nasopharyngeal airway sizes and volumes were smaller in subjects with narrow and flat airways than in those with broad and long airways (p < 0.01). Children who showed high adenoid-nasopharyngeal ratios on sagittal imaging, indicating moderate to severe adenoid hypertrophy, had the narrow and flat type nasopharyngeal airway (p < 0.01). Conclusions: Cone-beam computed tomography is a clinically simple, reliable, and noninvasive tool that can simultaneously visualize the entire structure and a cross section of the nasopharyngeal airway and help in measurement of adenoid size as well as airway volume in children with adenoid hypertrophy.

• 한국농공학회논문집
• /
• 제60권2호
• /
• pp.25-36
• /
• 2018

Drip irrigation system is a low energy cost method which can efficiently save and supply water by dropping water slowly on the crop's root zone during crop growth. In the drip irrigation system, disk filters take an important role to physically remove impurity (inorganic and suspended organic) particles present in agricultural water which can cause emitter clogging. For the purpose, both top-and-bottom surfaces of the disk are grooved in micron size flowing from outside to inside. However, many congested flow paths in disk filter media incur higher head loss of inflow water resulting in relatively decreasing velocities depending on operation time than sand and mesh filters. Therefore, it is important to optimize the structure of disk filter in micro irrigation system. The head loss of disk filter media takes also charge of more than 60 % of total head loss in whole disk filter. This study is to find the appropriate cross-sectional shape of the disk groove to minimize the head loss by executing the experiment. The experiment used three disk filters that have similar filter body but have a half-elliptic and two kinds of triangular cross sections. The experimental results showed that the disk filter with half-elliptic cross sections of disk grooves have less head loss than the disk filter with regular triangular one.

• 한국강구조학회 논문집
• /
• 제25권4호
• /
• pp.347-357
• /
• 2013

최근, 콘크리트 충전강관 기둥(CFT)은 우수한 구조성능을 인정받아 현장적용이 활발하게 이뤄지고 있다. 한편 강재개발과 가격 상승으로 인해 단면을 효율적으로 사용하고자 하는 연구가 지속적으로 진행되고 있다. 본 연구실에서는 단면의 효율을 극대화 하기 위해 얇은 L형 플레이트 4개를 각형강관으로 형성한 단면을 제안한다. 이로 인해 강관 내부에 형성된 리브는 폭 중앙에 위치하고 있어 콘크리트와의 앵커역할이 가능하다. 또한 동일한 단면적을 갖는 일반 CFT기둥에 비해 우수한 좌굴내력과 변형성능이 발휘됨을 실험으로 평가되었다. 본 연구에서는 활용범위를 넓히고자 얇은 강판으로 조립된 신형상 기둥을 제안하며 구조적 성능을 재평가 하고자 한다. 실험 주요변수 폭두께비(b/t: 78,96,107) 이다. 실험결과 규준에서 제시하고 있는 폭두께비를 초과했음에도 내부에 설치된 리브의 앵커역할로 인해 충분한 내력을 발휘하며, 변형성능 향상에 유리한 것으로 분석되었다.

• Structural Engineering and Mechanics
• /
• 제54권6호
• /
• pp.1135-1152
• /
• 2015

Most of current bridge decks are made of reinforced concrete and often deteriorate at a relatively rapid rate in operational environments. The quick deterioration of the deck often impacts other critical components of the bridge. Another disadvantage of the concrete deck is its high weight in long-span bridges. Therefore, it is essential to examine new materials and innovative designs using hybrid system consisting conventional materials such as concrete and steel with FRP plates which is also known as composite deck. Since these decks are relatively new, so it would be useful to evaluate their performances in more details. The present study is dedicated to Hat-Shape composite girder with concrete slab. The structural performance of girder was evaluated with nonlinear finite element method by using ABAQUS and numerical results have been compared with experimental results of other researches. After ensuring the validity of numerical modeling of composite deck, parametric studies have been conducted; such as investigating the effects of constituent properties by changing the compressive strength of concrete slab and Elasticity modulus of GFRP materials. The efficacy of the GFRP box girders has been studied by changing GFRP material to steel and aluminum. In addition, the effect of Cross-Sectional Configuration has been evaluated. It was found that the behavior of this type of composite girders can be studied with numerical methods without carrying out costly experiments. The material properties can be modified to improve ultimate load capacity of the composite girder. strength-to-weight ratio of the girder increased by changing the GFRP material to aluminum and ultimate load capacity enhanced by deformation of composite girder cross-section.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.108-113
• /
• 2002

This paper presents a multi-step structural design optimization method fur machine tool structures using a genetic algorithm with dynamic penalty. The first step is a sectional topology optimization, which is to determine the best sectional construction that minimize the structural weight and the compliance responses subjected to some constraints. The second step is a static design optimization, in which the weight and the static compliance response are minimized under some dimensional and safety constraints. The third step is a dynamic design optimization, where the weight static compliance, and dynamic compliance of the structure are minimized under the same constraints. The proposed design method was examined on the 10-bar truss problem of topology and sizing optimization. And the results showed that our solution is better than or just about the same as the best one of the previous researches. Furthermore, we applied this method to the topology and sizing optimization of a crossbeam slider for a high-speed machining center. The topology optimization result gives the best desirable cross-section shape whose weight was reduced by 38.8% than the original configuration. The subsequent static and dynamic design optimization reduced the weight, static and dynamic compliances by 5.7 %, 2.1% and 19.1% respectively from the topology-optimized model. The examples demonstrated the feasibility of the suggested design optimization method.

• Nutrition Research and Practice
• /
• 제14권2호
• /
• pp.160-166
• /
• 2020

BACKGROUND/OBJECTIVES: The obese population is rapidly increasing because of reduced physical activity and a Westernized diet; consequently, various chronic diseases are more prevalent. With the increasing interest in body shape and appearance, research on body shape perceptions and accompanying weight control behaviors are needed for healthy weight management. SUBJECTS/METHODS: A cross-sectional survey was conducted on randomly selected 536 (209 men and 327 women) aged 20 to 65 years. Body mass index (BMI), body-shape perception, weight control behavior, quality of sleep, and place of residence were collected using self-reported questionnaires. Multivariable logistic regression analysis was conducted using complex design in each groups. Collected data were analyzed using the SAS 9.4 statistical package, and the significance level was set at P < 0.05. RESULTS: When these two variables were divided into four groups, they were found to influence dieting attempts. People with abnormal weights who were dissatisfied with their body shapes attempted dieting 5.23 times more than those with healthy weights and satisfaction with their body shapes. Further, those with normal weights but dissatisfaction with their bodies attempted dieting 4.45 times more than those who were satisfied with their shapes. Subjects in their 20s attempted dieting 2.53 times more than those in their 30s and 40s, and female subjects attempted dieting 2.24 times more than male subjects. CONCLUSIONS: A correct perception of one's shape can be an important factor for dietary behavior, as body shape perceptions and dieting attempts are strongly related. Additionally, healthy weight management and nutrition education are important elements to incorporate into a weight control program aimed at preventing excessive weight control behaviors and promoting correct perceptions of body shape.

• 지질공학
• /
• 제31권3호
• /
• pp.343-355
• /
• 2021

농업용저수지는 농업용수를 공급함과 동시에 수해효과 및 휴식터를 제공함으로써 인간의 편의성을 추구하지만 노후 저수지 및 지진으로 인한 피해가 발생될 수 있으며 이에 따른 예방이 중요하다. 제방의 안전성은 제방을 구성하는 세분화된 재료의 토양 매개변수 값과 같은 현장재료 특성에 의해 영향을 받지만 정밀안전진단이나 일반 문헌값이 전용되기 때문에 최종제반의 안전인자를 물질적 특성만으로 판단하기에는 한계가 있다. 안전요인은 물리적 특성값과 제방 형태에 의의 결정되며 안전 요인에 상당한 영향을 미치기 때문에 보강된 횡단면을 검토할 때 정확한 사색이 필요하다. 따라서 본 연구에서는 GEP-SLOPE 프로그램을 활용하여 전남 고흥근 '◯◯저수지' 내진설계 시 합리적이고 경제적인 보강교차로 사례를 분석함으로써 반복적인 검토를 통해 보강교차로에 대한 합리적 경제적 설계가 가능하도록 분석하였다. 제방의 1, 2, 3차 내진보강을 감소하여 분석한 결과, 3차 보강단면에서도 상류, 하류사면 모두 설계기준 1.20 이상을 얻음으로써 1. 2차에 비해 현저히 적은 보강물 보강물량으로도 안전율 확보가 되는 것을 확인하였다. 또한 제반의 내진보강 단면 형상을 결정할 때 사면의 상부측, 사면전체에 사석을 보강하는 것 보다 하부측에만 보강하는 형상이 단면보강을 최소화 시키며 경제적인 것을 확인하였다.