• Environmental Engineering Research
• /
• 제25권4호
• /
• pp.498-505
• /
• 2020

This study analyzes the velocity and pressure incurred by protruding shapes installed within the inlet part of a pressurized membrane module during operation to determine the fluid flow distribution. In this paper, to find the flow distribution within a module, it investigates the velocity and pressure values at cross-sectional and outlet planes, and 9 sections classified on outlet plane using computational fluid dynamics. From the Reynolds number (Re), the fluid flow was estimated to be turbulent when the Re exceeded 4,000. In the vertical cross-sectional plane, shape 4 and 6 (round-type protrusion) showed the relatively high velocity of 0.535 m/s and 0.558 m/s, respectively, indicating a uniform flow distribution. From the velocity and pressure at the outlet, shape 4 also displayed a relatively uniform fluid velocity and pressure, indicating that fluid from the inlet rapidly and uniformly reached the outlet, however, from detailed data of velocity, pressure and flowrate obtained from 9 sections at the outlet, shape 6 revealed the low standard deviations for each section. Therefore, shape 6 was deemed to induce the ideal flow, since it maintained a uniform pressure, velocity and flowrate distribution.

• 패션비즈니스
• /
• 제13권3호
• /
• pp.118-135
• /
• 2009

This study is done in Shanghai area by sample survey of female college students. Through direct contact survey, this study collected and analyzed information on figure to understand feature of breasts and measurements of body to provide base information to improve product of brassiere for adult female in China. Data was analyzed by using SPSSWIN 13.0 Program and SAS 9.0. 1. From a result of analysis on the body measures to understand the characteristics of the shape of the breast of the Chinese female college students(18$\sim$24 years old), the bust circumference was 83.86cm and the underbust circumference was 73.37cm and the cup size of a brassiere was 75A. 2. From a result of analysis on the bust measures to understand the relations between the front, lateral and cross-sectional proportions of the bust and the shape of the breast in the Chinese female college students, the chest height was 0.77, the bust height was 0.71 and the underbust height was 0.68 as the information of the body type that shows the location of the bust that is the measure of an item to a height as the front proportion of the bust. For the lateral proportion of the bust, the chest depth of the waist depth was 0.98, the bust depth, 1.21 and the underbust depth, 1.03. While the bust depth/waist depth is ideal when being 1.3, it was 1.21 in this study to be close to the ideal lateral shape. For the cross-sectional proportion of the bust, the area of the largest evenness was the bust followed by the waist, underbust and chest in order. 3. From a result of analysis on the correlation between measured items necessary to understand the characteristic of the shape of the breast, to set up the sizes and to produce the patterns, the underbust circumference had a relatively high correlation between the items of breadth, depth and circumference and weight as the items of basic areas.

• 한국공작기계학회논문집
• /
• 제16권3호
• /
• pp.96-102
• /
• 2007

An Optimal shape design of the boom system in high ladder vehicles is performed using 3-D finite element method (FEM). Results of structural analyses providing displacements, stresses are implemented for the optimum shape design. Lanzcos algorithm is used for the modal analysis in order to find natural frequencies. The optimal shape including cross sectional thickness and length of the boom system is controlled by the subproblem method besed on displacement and Von Mises stress. It is found that a plenty of materials can be saved by using shape design optimization in high ladder vehicles. It is also found that the natural frequency is increased until 6th mode and maintained similarly or decreased after 6th mode.

• 한국방재안전학회논문집
• /
• 제16권3호
• /
• pp.17-26
• /
• 2023

프리스트레스드 콘크리트(Prestressed Concrete, PSC) 거더는 프리텐션과 포스트텐션 긴장 방식으로 구분되고, 단면 형상에서는 I형과 U형으로 구분된다. 각 긴장 방식과 단면 형상에 따른 장단점이 있고, 각각의 방식으로 교량 건설 현장에 적용되고 있다. 본 연구에서는 프리텐션 긴장 방식과 U형 단면의 단점을 극복하여 적용한 새로운 거더 형식을 제안하고 구조 성능을 검증하고자 하였다. 프리텐션 긴장 방식의 거더는 반력대가 필요한 관계로 주로 공장에서 제작되며, 이동을 위하여 무게와 경간장이 제한되는 단점이 있다. 또한 U형 단면의 경우 전도 등 시공 시 구조 안정성이 높으나, 자중이 I형에 비해 상대적으로 커서 현장 제작 후 포스트텐션 긴장 방식이 주로 적용되고 있다. 본 연구에서는 현장 프리텐션 긴장 방식을 적용한 PSC 거더 제작 방식 제시하고 40 m급 실대형 실험체를 제작하여 구조 성능을 검증하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제14권6호
• /
• pp.153-161
• /
• 2010

1970년대에 콘크리트를 기반으로 지어진 많은 구조물과 빌딩은 안전성과 사용성을 고려하여 무수히 많은 연구를 현재까지 진행해 왔으나, 설계강도 보다 낮은 최대강도를 보이고 있다. 현재 노후화된 콘크리트 구조물들에 대한 다양한 보수 보강 공법이 개발되어 적용되고 있지만 기존 연구들은 구조물의 특성에 대해서는 고려하지 않고, 단지 기존 부재와 보수 재료의 부착에 관한 연구와 기존 부재를 효과적으로 보강하기 위한 새로운 방법을 개발하는 연구는 미흡한 실정이다. 따라서 본 연구는 보수 보강 재료를 이용한 효율적인 강도증진 방법에 대한 연구, 보강 재료와 기존 부재 사이의 거동에 대해 부족했던 연구를 보완하고자 한다. 또한 고강도 콘크리트는 높은 압축강도를 발현하기 때문에 부재의 단면을 축소시킬 뿐만 아니라 구조물의 자중 또한 감소시킬 수 있으므로 거대한 구조물 건설에 사용되고 있다. 고강도 콘크리트의 사용이 점차 증가하는 추세이지만 고강도 콘크리트를 이용한 구조물의 보수 보강에 대한 방법 연구 역시 미진한 실정이다. 따라서 본 연구에서는 효과적인 고강도 콘크리트 기둥에 대한 보수 보강 방법을 개발하고자 한다. 본 연구에서는 사각단명 형상을 가진 기둥을 팔각단면으로 형상 변형을 통해 CFS로 보수 보강하여 단면 형상이 변함에 따른 효과를 파악하고, CFS로 보강된 고강도 콘크리트(HSC) 기둥의 강도 증대 효과와 파괴 거동에 대해 파악하고자 한다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2002년도 가을 학술발표회 논문집
• /
• pp.521-526
• /
• 2002

The seismic performance of structural walls subjected to the cyclic lateral loads are influenced by various factors, like sectional shape, aspect ratio, reinforcement ratio, arrangement of reinforcement, and axial load ratio etc. In this research, reinforced concrete structural walls with the T-shaped cross section were selected. The seismic performance of T-shaped wall was affected by the many (actors because T-shaped wall is irregular wall composed to two rectangular walls. Especially the seismic performance of T-shaped wall varies with the flange condition and the various factors including the flange condition were determined. Therefore, the objective of this study is to understand the factors to improve seismic performance of RC T-shaded tv using sectional analysis.

• 한국산업융합학회 논문집
• /
• 제5권2호
• /
• pp.141-146
• /
• 2002

Stereolithography is the best known as rapid prototyping system. It uses the STL format data which is generated from CAD system. In this study, One of the main function of this developed CAM system deals with shape modification which divide a shape into two parts or more. The cross section of a STL part by a z-level is composed with nested or single polygonal closed loop. In order to make RP product, closed loops must fill with triangular facets from SSET and recover sliced triangular facets which is located normal direction to the cross sectional plane. The system is development by using Visuall C++ compiler in the environment of pentium PC. Operating system is Windows NT workstaion from Micro-Soft.

• 한국결정성장학회지
• /
• 제23권2호
• /
• pp.67-75
• /
• 2013

In order to improve osseo-integration of a dental implant with bone crystal we studied an implant with holes inside its body to deliver bioactive materials based on a proposed patent. After bioactive material is absorbed, bone crystal can grow into holes to increase implant bonding in addition to surface integration. The larger cross section area of outlet holes showed the less values of the maximum stress, and the stress concentrations near the uppermost outlet holes were also reduced with an increasing number of outlet holes. The conclusion, that the uppermost outlet design improvement was most effective to reduce the stress concentration and improve the growth rate of bone crystal, could be drawn. After the design optimizations, Type 6-C had provided the best results in this study. The overall shape optimization studies on the shape, location, number, and so on, of the outlet holes, should be carried out further.

• 대한치과의사협회지
• /
• 제51권10호
• /
• pp.551-555
• /
• 2013

The purpose of this study was to give a guideline for selecting the nickel-titanium (NiTi) file by review from many studies. Since the early 1990s, several instrument systems manufactured from NiTi have been introduced into endodontic practice. The specific design characteristics vary, such as tip shape and size, cross sectional view, helix angle, and pitch space. Some of the early systems have been removed from the market or play only minor roles; others are still widely used. New designs continually are produced, but the extent to which clinical outcomes will depend on design characteristics is difficult to forecast. In this study, I have reviewed the different design characteristics in respect of the safety and efficiency. With the review from many studies, I concluded that the clinicians must be understand the specific design characteristics for selecting the ideal NiTi rotary instruments.

• 한국터널지하공간학회 논문집
• /
• 제14권2호
• /
• pp.141-157
• /
• 2012

TBM 공법 적용을 위한 도로터널 단면의 국내 외 설계사례와 시공사례 및 터널단면 설계기준을 조사 분석하였다. 교통량에 따라 차로수의 규모 및 내부형상(단층 혹은 복층)이 상이하였고, 상 하부의 여유공간은 환기, 방재시설 및 유지관리 공간 등으로 다양하게 활용하고 있음을 확인하였다. TBM도로터널의 구성요소별 면적비를 확인하기 위하여 2차로 규모의 표준단면을 가정하고, 길어깨 폭원변화에 따른 내공단면 구성요소(시설한계 수용공간, 상부여유공간, 하부여유공간)의 단면적비를 분석하였다. 아울러 도로터널에 필수적으로 설치되는 차도 슬래브의 지지형식별 소요두께를 구조해석을 통하여 산정하였고, 산정된 벽체 및 슬래브 두께와 하부 여유공간의 상관관계를 분석하여 유효단면적 범위를 제시하였다.