• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.1
• /
• pp.33-43
• /
• 2023

Pathological wear across the entire dentition causes problems such as collapsed occlusal plane, reduced vertical dimension, anterior premature contact, inadequate anterior guidance, and tooth migration, thereby induce symptoms such as temporomandibular joint disorder, reduced masticatory efficiency, and tooth hypersensitivity. For the treatment of patients with excessive wear, evaluation of vertical dimension should be preceded along with analysis of the cause. The patient in this case was a 45-year-old female with a history of orthognathic surgery. Through clinical examination, radiographic examination, and model analysis, overall tooth wear, interdental spacing in the anterior maxillary region, retruded condylar position, and insufficient interocclusal space for prosthetic restoration were confirmed. Full mouth rehabilitation with increased vertical dimension was planned, the patient's adaptation to the new vertical dimension was evaluated with a removable occlusal splint and temporary prosthesis, and cross-mounting was performed based on the temporary restoration to fabricate the definitive zirconia prosthesis, maintaining the adjusted vertical dimension. It showed satisfactory functional and esthetic results through stable restoration of the occlusal relationship.

• Korean Journal of Mineralogy and Petrology
• /
• v.36 no.4
• /
• pp.233-257
• /
• 2023

Asbestos minerals are found at rocks and soils of the Hongseong and Bibong serpentine mines, western part of Chungnam. The area consists of and metasediment, and Mesozoic igneous intrusives with minor age-known gneiss complexes and Mesozoic sediments. With detailed geological investigations, rock samples for the serpentinite and amphibolite areas are collected at sites containing asbestos. Representative asbestos and rock samples are analysed by PLM, XRD, SEM and EPMA. Serpentinites are found as steeply dipping faults with adjacent gneiss complex to the NNE direction. Repeated alteration, including serpenitization and talcification, is found at the emplacement direction for the serpentinite body. Amphibollites occur as intrusives and stratiforms within the Precambrian gneiss complex. Serpentinite and amphibolite (or amphibole schist) contain amphiboles either as asbestiform or non-asbestiform. Varying amounts of asbestos minerals, including chrysotile, tremolite asbestos and actinolite asbestos, are found within the serpentinites. The asbestos minerals are found near the cracks or fractures and along the bedding plane. They occur as cross fiber, slip fiber and mass fiber types. Varying amounts of amphibole asbestos minerals, such as tremolite and actinolite asbestos, are found within amphibolites and as a mass fiber type. Overall results suggest that rocks of the serpentine mines contain serpentine and amphibole type asbestos minerals originated from the hydrothermal alteration. Considering construction nearby the mines and environmental risks by the asbestos, additional land management plans are required.

• Korean Journal of Environment and Ecology
• /
• v.28 no.2
• /
• pp.215-234
• /
• 2014

The purpose of this study is to identify the type and characteristics of the domestic natural streams in order to establish a basis for stream restoration and evaluation. To this end, 95 domestic natural stream areas, which have various natural environments, were selected except for the province of island and then the characteristics of natural environment, hydromorpholoy, plant and vegetation were investigated and analyzed in each stream area. As a result, 95 stream areas were classified into total 24 types according to 3 criteria such as stream size (4 types), altitude (3 types), bed material (5 types). Depending on altitude class that is the environmental factor showing the highest correlation with each stream types, the emergence of vegetation and plant, 24 stream types were reclassified into 3 types such as lowland (altitude less than 200m), mountain (altitude from 200m to 500m), highland (altitude more than 500m), and hydromorpholoy, plant and vegetation characteristics of each stream type were compared. First, when compared to the mountain and highland streams, the typical features of lowland streams were as follows: Stream size was large but bed material size was small and there were many valley forms where flood plane were developed well. In addition, the more large stream size was, the more cross-section width variability, bars and sinuosity were in good conditions. In lowland stream, representative vegetation community was Salix koreensis community. On the other hand, when compared to the lowland streams, the typical features of mountain and highland streams were as follows: Stream size was small but bed material was coarse-grained and its size was large. Mountain and highland streams valley form where flood plane was not developed well was narrow, and sinuosity and bars development were weak. Representative vegetation communities of mountain streams were Quercus serrata -, Quercus variabilis -, Styrax japonica community and representative vegetation communities of highland streams were Pinus densiflora -, Quercus mongolica -, Fraxinus rhynchophylla community.

• Journal of the Korean Geophysical Society
• /
• v.3 no.1
• /
• pp.57-66
• /
• 2000

The location and geometry of the Ulsan Fault play important roles in interpreting tectonic evolution of the southeastern part of the Korean Peninsula. Dipole-dipole electrical resistivity surveys and seismic refraction surveys were carried out in the Yaksoo area, Ulsan in order to measure the thickness of the alluvium covering the Ulsan Fault and to find associated fracture zones and possibly the location of its major fault plane. The collected data were analyzed and interpreted. Some results reported previously by others were also used in this interpretation. No low resistivity anomalies were found in the cross-sectional resistivity image of the survey line located in the east of the Dong River. In contrast, well-developed continuous low resistivity anomalies were detected in the west of the Dong River. This strongly suggests that the major fault plane of the Ulsan Fault is located under or in the west part of the Dong River. Two refraction boundaries corresponding to the underground water level and the bottom of the alluvium were found by refraction surveys carried out on the limited part of the east survey line. The thickness of the alluvium was found to be about 30 m. Small faults in the basement rock identified by reflection surveys were not detected by both resistivity and refraction seismic surveys. This might be explained by assuming that low resistivity anomaly is more closely related to the clay contents than the water contents. On the other hand, it may be resulted by the limited resolution of the resistivity and refraction surveys. Detailed study is required to clarify the reason. Resistivity survey is frequently considered to be a good exploration method to detect subsurface faults. However, it appears to be less useful than reflection seismic survey in this work. In dipole-dipole resistivity survey, the number of separation should be increased to survey deeper subsurface with the same resolution. However, signal to noise ratio decreases as the number of separation increases. In this survey area, the signal to noise ratio of up to sixteen separations was good enough based on the statistical properties of measurements.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.5 no.3
• /
• pp.49-59
• /
• 1985

Formulation of the geometric optimization for truss structures based on the elasticity theory turn out to be the nonlinear programming problem which has to deal with the Cross sectional area of the member and the coordinates of its nodes simultaneously. A few techniques have been proposed and adopted for the analysis of this nonlinear programming problem for the time being. These techniques, however, bear some limitations on truss shapes loading conditions and design criteria for the practical application to real structures. A generalized algorithm for the geometric optimization of the truss structures which can eliminate the above mentioned limitations, is developed in this study. The algorithm developed utilizes the two-phases technique. In the first phase, the cross sectional area of the truss member is optimized by transforming the nonlinear problem into SUMT, and solving SUMT utilizing the modified Newton-Raphson method. In the second phase, the geometric shape is optimized utilizing the unidirctional search technique of the Rosenbrock method which make it possible to minimize only the objective function. The algorithm developed in this study is numerically tested for several truss structures with various shapes, loading conditions and design criteria, and compared with the results of the other algorithms to examme its applicability and stability. The numerical comparisons show that the two-phases algorithm developed in this study is safely applicable to any design criteria, and the convergency rate is very fast and stable compared with other iteration methods for the geometric optimization of truss structures.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.5 s.108
• /
• pp.461-475
• /
• 2006

In this paper, it is described about the tri-band mobile antenna system design to provide broadband multimedia and direct broadcasting services using goo-stationary Koreasat 3, simultaneously operated in Ka/K/Ku band. The radiating part of the antenna system with a fan beam characteristic in the elevation plane is composed of the quasi-offset dual shaped reflector and the tri-band feeder. The tri-band feeder is also composed of the Ka/K dual band feeder with the protruding dielectric rod, the circular polarizer, the ortho-mode transducer and the circular-polarized Ku band feed array. Especially, the Ka/K dual band circular polarizer was realized firstly using the comb-type structure. For fast satellite-tracking on the movement, the Ku band feed array has the structure of the $2{\times}2$ active phased array which can make electrical beams. And, the circular-polarized characteristic in the feed array was improved by $90^{\circ}$ rotating arrangement of four radiating elements polarized circularly by a $90^{\circ}$ hybrid coupler, respectively. Four beam forming channels to make electrical beams at Ku band are divided into the main beam channel and the tracking beam channel in the output, and noise temperature characteristics of each channel were analyzed on the basis of the contributions of internal sub_units. From the fabricated antenna system, the output power at $P_{1dBc}$ of Ka_Tx channel was measured more than 34.1 dBm and the measured noise figures of K/Ku_Rx channels were less than 2.4 dB and 1.5 dB, respectively, over the operating band. The radiation patterns with co- and cross-polarization in the tri-band were measured using a near-field measurement in the anechoic chamber. Especially, Ku radiation patterns were measured after correcting each initial phase of active channels with partial radiation patterns obtained from the independent excitation of each channel. The antenna gains measured in Ka/K/Ku band of the antenna system were more than 39.6 dBi, 37.5 dBi, 29.6 dBi, respectively. And, the antenna system showed good system performances such as Ka_Tx EIRP more than 43.7 dBW and K/Ku_Rx G/T more than 13.2 dB/K and 7.12 dB/K, respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.6
• /
• pp.3894-3906
• /
• 2014

The aim of this study was to classify the central Buddhist temple among the state-designated cultural assets, which were measured precisely, into the gable roof buildings and the gambrel roof buildings to analyze the Ang-Goak, Inside waist, ridge ratio, and roof inclination represented on the roof, and prepare basic objective material for the restoration and repair of cultural assets. As a result, as for the relationship between the roof curve and the inclination of the gable roof building and gambrel roof building, the following conclusions could be drawn. First, the Ang-Goak and Inside waist of the gable roof building had a close correlation with the building size, and the internal high pillar existence. In addition, the Ang-Goak and Inside waist were shown in the 7-ryangga structure, which is greater in size than in the 5-ryangga structure. This was found to be related to the building size. Second, the Ang-Goak and Inside waist of the gable roof building has a correlation with each other, and it was found that Inside waist also was large in the building with a larger Ang-Goak. The roof inclination rarely had a connection with variable factors (plane factor, elevation factor, and cross section factor). The sizes of Ang-Goak, Inside waist, and ridge ratio were similar in the outside 1 chulmok and outside 2 chulmok of gongpo but those sizes were relatively larger in outside 3 chulmok. Third, the Ang-Goak and Inside waist of the gambrel roof building moved independently for each building without a correlation with each other, unlike the case of the gable roof building. The front and the side showed a correlation with each other, and in the building with the large curve of the front side, the curve was also large in the sides. Fourth, in the case of the building with a high pillar inside the gambrel roof building, the Ang-Goak and Inside waist were larger. On the other hand, they were smaller in the case of a building without a high pillar. This was found to have a close relationship with the building size. In addition, the ridge ratio has a close connection with the building size and building height. Therefore, the ridge ratio is larger in a high building or large sized building. The roof inclination rarely has a correlation with variable factors, as in the case of the gable roof building.

• Investigative Magnetic Resonance Imaging
• /
• v.7 no.1
• /
• pp.22-30
• /
• 2003

Purpose : The efficacy of magnetic resonance imaging for evaluating coronary artery disease has been reported. In this study, we evaluated the usefulness of breath-hold segmented K-space cine MR imaging for evaluating the patency of coronary artery bypass grafts (CABG). Materials and Method s : Thirty eight patients with a total of 92 CABGs (36 internal thoracic arteries and 56 saphenous vein grafts) were evaluated using segmented K-space cardiac-gated fast gradient echo sequence (2D-FASTCARD) MR imaging. MR magnitude images were evaluated from the hard copies by two independent observers. A graft was defined as patent if it was seen as a bright small round area on at least two consecutive images throughout the cardiac cycle at a position consistent with the expected location for that graft. Results : MR images were obtained successfully for 23 patients (61%). The sagittal planes were most helpful in visualizing the cross-section of sapheneous vein bypass graft to left circumflex artery branch, whereas the transverse planes were used for identification of internal mammary artery grafts to left anterior descending coronary artery or its branch and identification of saphenous vein grafts to right coronary artery. Forty five grafts were visible using this MR technique, while the grafts were not visible on seven saphenous vein grafts and two internal mammary artery grafts. In two patients showing symptoms of myocardial ischemia, one or two bypass grafts were not visible. Imaging, perpendicular plane to a CABG was important to visualize the flow inside the CABG with maximum sensitivity. Conclusion : Evaluation of patency of the bypass graft was clinically feasible by 2D-FASTCARD MR imaging, whereas any invisible bypass grafts should be further studied by contrast-enhanced MR angiography or by conventional angiography for confirmation of abnormalities.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.30 no.5
• /
• pp.691-699
• /
• 1997

In order to find out the properties in flow resistance of trawlR=1.5R=1.5\;S\;v^{1.8}\;S\;v^{1.8} nets and the exact expression for the resistance R (kg) under the water flow of velocity v(m/sec), the experimental data on R obtained by other, investigators were pigeonholed into the form of $R=kSv^2$, where $k(kg{\cdot}sec^2/m^4)$ was the resistance coefficient and $S(m^2)$ the wall area of nets, and then k was analyzed by the resistance formular obtained in the previous paper. The analyzation produced the coefficient k expressed as $$k=4.5(\frac{S_n}{S_m})^{1.2}v^{-0.2}$$ in case of bottom trawl nets and as $$k=5.1\lambda^{-0.1}(\frac{S_n}{S_m})^{1.2}v^{-0.2}$$ in midwater trawl nets, where $S_m(m^2)$ was the cross-sectional area of net mouths, $S_n(m^2)$ the area of nets projected to the plane perpendicular to the water flow and $\lambda$ the representitive size of nettings given by ${\pi}d^2/2/sin2\varphi$ (d : twine diameter, 2l: mesh size, $2\varphi$ : angle between two adjacent bars). The value of $S_n/S_m$ could be calculated from the cone-shaped bag nets equal in S with the trawl nets. In the ordinary trawl nets generalized in the method of design, however, the flow resistance R (kg) could be expressed as $$R=1.5\;S\;v^{1.8}$$ in bottom trawl nets and $$R=0.7\;S\;v^{1.8}$$ in midwater trawl nets.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.30 no.5
• /
• pp.700-707
• /
• 1997

In order to express exactly the total resistance of bottom trawl nets subjected simultaneously to the water flow and the bottom friction, the influence of frictional force was added to the formular for the flow resistance of trawl nets obtained by previous papev and the experimental data obtained by other investigators were analyzed by the formula. The analyzation produced the total resistance R (kg) expressed as $$R=4.5(\frac{S_n}{S_m})^{1.2}S\;v^{-1.8}+20(Bv)^{1.1}$$ where $S(m^2)$ was the wall area of nets, $S_m\;(m^2)$ the cross-sectional area of net mouths, $S_n\;(m^2)$ the area of nets projected to the plane perpendicular to the water flow, B (m) the made-up circumference at the fore edge of bag parts, and v(m/sec) the dragging velocity. From the viewpoint that expressing R in the form of $R=kSv^2$ was a usual practice, however, the resistant coefficient $k(kg{\cdot}sec^2/m^4)$ was compared with the factors influencing it by reusing the experimental data. The comparison gave that the coefficient k might be expressed approximately as a function of BL only and so the resistance R (kg) as $$R=18{\alpha}B^{0.5}L\;v^{1.5}$$ where L (m) was the made-up total length of nets and $\alpha=S/BL$. But the values of a in the nets did not deviate largely from their mean, 0.48, for all the nets and so the general expression of R (kg) for all the bottom trawl nets could be written as $$R=9\;B^{0.5}\;L\;v^{1.5}$$.