• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.2
• /
• pp.280-287
• /
• 2000

Laboratory measurements were made of wall pressure fluctuations in a separated and reattaching flow over a backward-facing step. An array of 32 microphones along the streamwise direction was utilized. Various statistical properties of pressure fluctuations were scrutinized. The main emphasis was placed on the flow inhomogeneity along the streamwise direction. One point statistics such as the streamwise distribution of rms pressure and autospectra were shown to be generally consistent with other studies. The coherences and wavenumber spectra in the streamwise directions were indicative of the presence of dual modes in pressure; one is the large-scale vortical structure in low frequency and the other is the boundary-layer-like decaying mode in high frequency.

• Korean Journal of Applied Biomechanics
• /
• v.14 no.3
• /
• pp.149-163
• /
• 2004

This study analyzed kinematic variables about the cross step, the delivery and the release for women's javelin athletics recorded over 50m in the 2004 Busan International Athletics Competition. It was used the Kwon3D Motion Analysis Package Ver. 3.1 Program(Kwon, 2000) for analysing the kinematic variables about the distance, the velocity, and the angle, then we had the results as follows; 1 In the Cross step phase, the COG velocity was low because their step length was short. To keep the CM velocity from the approach to the last cross over step contact, the athletes have to keep the longer step length within about 130% of the athletics' height. 2. In the Delivery phase, the athletics' COG height was gradually lower, and the deceleration of the COG was going up. As the same in the cross step, Therefore the athletes have to increase the step length within about 100% of their height, in order to increasing the COG velocity. And it was shown they have to make small angle of the elbow as possible from the right foot contact to the left foot contact in order to being the big acceleration of the upperarm at the release phase. 3. In the release phase, it was shown to being low position of the release point as the COG was low and then the release velocity of the upperarm was low. Specially when the shoulder lean lateral angle is big at the release phase, it was shown they have a excessive release angle. And, when it was shown the high rotation angle of the shoulder, the shoulder was opened forward bigger than the trunk was opened forward. So the transmission of velocity from the proximal segments was a fast change.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.3
• /
• pp.357-360
• /
• 2011

Machine tools of Gantry type have been performing machine work as a moving machinery. In a large machine tools, the machinery is moving with bed and it is structurally unstable. When the objects are processed, machine tools gets loads in the direction of Z-axis. In other words, the machine tools which become bigger was performed by the trend of complexation. It made that the increased machine weight can't be passed over. In order to enhance manufacturing precision, it needs to compensate Z-axis deflection of weight for machine tools. In this paper, Machine tools of Gantry type were miniaturized and deflection was measured by LVDT sensors. When deflection was measured, block mass weighted 50kg is moving on particular distance. Then, the displacement of fixed point and moving point is measured by recording telemeter.

• Journal of Korean Institute of Industrial Engineers
• /
• v.7 no.2
• /
• pp.27-41
• /
• 1981

The purpose of this study is to extract and classify the general patterns on scientific and technological development by quantitative approaches. Indicators used for this pattern classification amounted to a total of 39. what is more, these indicators were set up with the recent data for the first half of the 1970's mainly, and 141 nations were selected as the sample of the analysis. 7 aspects which prescribe the scentific and technological activities were established, and so 3 patterns of the S & T development were extrected by means of a "two-dimensional cross section" among them. (1) A pattern showing the trend of the exponential curve from the point over a certain level (in this study, it is defined as "Threshold Valued"). (2) A pattern in which elasticity of the exponential curve is gradually reduced from the point over the threshold value. (3) A pattern not showing any trend, but forming a large variance.

• The KSFM Journal of Fluid Machinery
• /
• v.18 no.1
• /
• pp.11-19
• /
• 2015

Recently, the cross flow turbines attract more attention for their good performance over a large operating regime at off design point. This study employs a very low head cross flow turbine, which has open inlet duct and has barely been studied before, to investigate the performance of the cross flow turbine with air suction from the rear part of the runner. Unlike conventional cross flow turbines, a draft tube is attached to the outlet of runner to improve the turbine performance. Water level and pressure in the draft tube are monitored to investigate the influence of air suction. Torque at local blade passage of three parts of runner is examined in detail under the conditions of different air suction. Consequently, it is found that with proper air suction in the runner chamber, the water level in the draft tube gradually drops to Stage 2 of the runner and the efficiency of the turbine can be raised by 10%. Overall, the effect of air-layer on the performance of the turbine is considerable.

• Steel and Composite Structures
• /
• v.2 no.3
• /
• pp.223-236
• /
• 2002

An analytical procedure based on the transfer matrix method to estimate not only the natural frequencies but also vibration mode shapes of the thin-walled members composed of interconnected cylindrical shell panels is presented. The transfer matrix is derived from the differential equations for the cylindrical shell panels. The point matrix relating the state vectors between consecutive shell panels are used to allow the transfer procedures over the cross section of the members. As a result, the interactions between the shell panels of the cross sections of the members can be considered. Although the transfer matrix method is naturally a solution procedure for the one-dimensional problems, this method is well applied to thin-walled members by introducing the trigonometric series into the governing equations of the problem. The natural frequencies and vibration mode shapes of the thin-walled members composed of number of interconnected cylindrical shell panels are observed in this analysis. In addition, the effects of the number of shell panels on the natural frequencies and vibration mode shapes are also examined.

• The KSFM Journal of Fluid Machinery
• /
• v.17 no.5
• /
• pp.67-71
• /
• 2014

Recently, the cross flow turbine attracts more and more attention for its good performance over a large operating regime at off design point. This study adopts a very low head cross flow turbine that has barely been studied before, and investigates the effect of air layer on the performance of the cross flow turbine. As open duct is applied in this study and free surface model is used between the air layer and water, an engineering definition of efficiency, instead of traditional definition of efficiency, is used. As torque at the runner fluctuates up and down at a reasonable limit, statistical method is used. Pressure and water volume fraction contours are shown to present the characteristics of air-water flow. With constant air suction in the runner chamber, the water level gradually drops below the runner and efficiency of the turbine can be raised by 10 percent. All considered, the effect of air layer on the performance of turbine is considerable.

• Korean Journal of Clinical Laboratory Science
• /
• v.37 no.3
• /
• pp.178-184
• /
• 2005

Carry over contamination has been reduced in some systems by flushing the internal and external surfaces of the sample probe with copious amount of diluent. It between specimens should be kept as small as possible. A built-in, continuous-flow wash reservoir, which allows the simultaneous washing of the interior and exterior of the syringe needles, addresses this issue. In addition, residual contamination can further be prevented through the use of efficient needle rinsing procedures. In discrete systems with disposable reaction vessels and measuring cuvets, any carry over is entirely caused by the pipetting system. In analyzers with reuseable cuvets or flow cells, carry over may arise at every point through which high samples pass sequentially. Therefore, disposable sample probe tips can eliminate both the contamination of one sample by another inside the probe and the carry over of in specimen into the specimen in the cup. The results of the applicative carry over experiment studied on 21 items for total protein (TP), albumin (ALB), total bilirubin (TB), alkaline phosphatase (ALP), aspratate aminotranferase (AST), alanine aminotranferase (ALT), gamma glutamyl transferase (GGT), creatinine kinase (CK), lactic dehydrogenase (LD), creatnine (CRE), blood urea nitrogen (BUN), uric acid (UA), total cholesterol (TC), triglyceride (TG), glucose (GLU), amylase (AMY), calcium (CA), inorganic phosphorus (IP), sodium (Na), potassium (K), chloride (CL) tests in chematology were as follows. Evaluation of process performance less than 1% in all tests was very good, but a percentage of ALB, TP, TB, ALP, CRE, UA, TC, GLU, AMY, IP, K, Na, and CL was 0%, implying no carry over. Other tests were ALT(-0.08%), GGT(-0.09%), CK(0.08%), LD(0.06%), BUN(0.12%), TG (-0.06%), and CA(0.89%).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.4A
• /
• pp.421-430
• /
• 2006

In this paper, we propose a practical implementation of network-adaptive HD(high definition) MPEG-2 video streaming with a cross-layered channel monitoring(CLM) over the IEEE 802.11a WLAN(wireless local area network). For wireless channel monitoring, AP(access point) periodically measures the MAC(medium access control) layer transmission information and sends the monitoring information to a streaming server. This makes that the streaming server reacts more quickly as well as efficiently to the fluctuated wireless channel than that of the end-to-end monitoring(E2EM) scheme for the video adaptation. The streaming sewer dynamically performs the priority-based frame dropping to adjust the video sending rate according to the measured wireless channel condition. For this purpose, our streaming system nicely provides frame-based prioritized packetization by using a real-time stream parsing module. Various evaluation results over an IEEE 802.11a WLAM testbed are provided to verify the intended QoS adaptation capability The experimental results show that the proposed system can effectively mitigate the quality degradation of video streaming caused by the fluctuations of time-varying wireless channel condition.

• The Korean Journal of Pesticide Science
• /
• v.14 no.3
• /
• pp.247-254
• /
• 2010

Two-spotted spider mite, Tetranychus urticae was collected from the rose greenhouse in Chilgok, Gyeongbuk Province in December 2000. This population has been selected for ten years with bifenazate (over 450 times), and increased 855.9 fold in resistance as compared with susceptible strain (S). Cross resistance of bifenazate resistant (BR) strain to eight miticides was investigated. The BR strain exhibited high and low cross resistance to acequinocyl (614.0 fold) and to chlorfenapyr (9.1 fold), respectively. Against fenazaquin (0.3 fold) and fenpyroximate (0.1 fold), however, showed the strain negatively correlated cross resistance. Each strain collected in Choeng-ju (CJ), Kang-jin (KJ), and Chung-ju (CUJ) showed 5.5-, 964.5-, and 21.8-fold resistance to bifenazate, respectively. The detoxifying enzymes of the BR strain showed 1.6-fold activity in cytochrome $P_{450}$-dependent monooxygenase ($P_{450}$) as compared with susceptible one. By comparing the mitochondrial cytochrome b (cytb) sequence, G126S point mutation was detected in the BR and KJ strains.