• Nutritional Sciences
• /
• 제7권4호
• /
• pp.208-213
• /
• 2004

In this study, we examined the effects of dietary 1,3-diacylglycerol (DG) compared to conventional triacylglycerol (TG) oil on the postprandial response of total and chylomicron TG, glucose, insulin, and free fatty acid (FFA). This study was conducted using a cross-over design. Ninety subjects participated in the high-fat meal tolerance test where they were randomly assigned to consume two experimental sandwiches containing mayonnaise with TG or DG oil with a seven-day interval. Blood samples were collected before ingestion and at 2, 3, 4 and 6 hr time point after ingestion and analyzed for total and chylomicron TG, glucose, insulin, FFA and phospholipid fatty acid composition. Both TG and DG ingestion had similar effects on postprandial TG response, but a different response from chylomicron TG. Compared with the TG group, TG levels were significantly lower only at 6 hr time point in the DG group. On the other hand, chylomicron TG rose steeply at 2 hr time point and decreased faster in this group. Also, the adjusted value to fasting levels was the same as the unadjusted level. Fasting levels and net differences in insulin were significantly lower at 3 hr time point where chylomicron TG levels were significantly lower in the DG group. But those of glucose and FFA in the TG and DG groups did not differ significantly. Fasting and postprandial levels of fatty acid composition in serum phospholipids in the two groups did not differ significantly. In conclusion, this study indicated that one could reduce the magnitude of postprandial lipemia without influencing glucose metabolism by consumning DG oil as a substitute for TG oil. Based on the correlation of coronary artery disease and postprandial lipemia, dietary DG ingestion might have a beneficial effect in treating such a disease. Further studies are required to clarify the long-tenn effects of dietary DG on blood lipid levels in humans.

• 한국정보과학회논문지:정보통신
• /
• 제35권2호
• /
• pp.99-111
• /
• 2008

최근 무선 랜은 SOHO (Small Office Home Office) 및 Hot Spot과 같은 환경에서 공간의 제약에 구애받지 않고, 인터넷에 접속할 수 있는 기술로서 사용자의 요구가 크게 증가하였다. 하지만, 무선 랜 환경에서의 통신은 유선망과 달리 불안정한 무선 채널의 특성으로 인해 연집적인 패킷 손실이 발생하여 통신상의 제약이 많은 특징을 가진다. 연집적인 패킷 손실은 AP(Access Point) 와 무선 단말의 거리가 증가하거나, AP와 무선 단말사이에 장애물 등이 일시적으로 지나갈 때 주로 발생하는 현상이다 결국, 현재 인터넷상에서 가장 광범위하게 사용되고 있는 무선 랜 기술인 IEEE 802.11은 이러한 특성으로 인해 사용자의 요구에 만족할만한 전송 성능을 나타내지 못하며, 특히 전송 계층에 TCP가 사용될 경우 불필요한 혼잡 제어 기법을 사용하게 함으로써 심각한 성능저하를 야기한다. 이러한 무선 랜 환경의 문제점을 해결하기 위해 MAC-layer LDA(Loss Differentiation Algorithm)가 제안되었다. MAC-layer LDA는 MAC 계풍의 Retry limit을 기반으로 CRD(Consecutive Retry Duration)를 무선 구간의 연집된 패킷손실 기간 이상 증가시켜, TCP의 불필요한 Timeout 발생 이전에 손실된 패킷을 효율적으로 복구하는 기법이다. 하지만, MAC-layer LDA 기법은 한정된 Retry limit의 증가로 인해 CRD가 연집된 패킷 손실 구간 보다 적은 경우가 발생하여 심각한 전송성능 저하를 가져온다. 또한, CRD의 증가는 무선 구간의 패킷 처리 시간을 증가시켜 대역폭과 무선 단말의 한정된 에너지 자원을 불필요하게 낭비하는 문제를 초래한다. 본 논문에서는 이러한 문제점을 개선하기 위해 Cross-layer 기법을 적용한 재전송 기법인 BLD(Burst Loss Detection) 모듈을 제안한다. BLD 모듈의 알고리즘은 현재 무선 랜 환경에서 가장 널리 사용되는 IEEE 802.11 MAC 프로토콜 기반의 재전송 기법으로서, MAC 계층과 TCP에서 사용되는 재전송 기법의 효율적인 연동을 통해 손실된 패킷을 복구한다. ns-2(Network Simulator) 시뮬레이터를 이용한 실험을 통해 BLD 모듈은 무선 구간의 연집적인 패킷 손실에 대해 효율적인 보상을 수행하여 전송 성능과 에너지 효율성을 향상시킬 수 있음을 확인하였다.

• 대한소아치과학회지
• /
• 제30권1호
• /
• pp.132-142
• /
• 2003

본 연구는 Hellman 치령 IIIA기에 해당되는 전치부 반대교합아동의 구개형태에 대한 특징을 3차원 레이저 스캐너를 이용하여 조사한 것이다. 반대교합아동과 정상교합아동 각각 20개의 상악 석고모형을 채득하였다. 각 모형은 3차원 레이저 스캐너(Intertec, Korea)로 스캔한 후 rapidform 2000 프로그램 (INUS, Korea)으로 3차원 이미지를 얻었으며, Rhino 3D 프로그램(rhinoceros, USA)으로 수치화 하였다. 측정부위는 양측 유견치 및 제1대구치를 연결한 횡단면상의 구개형태 곡선 그리고 절치유두의 최정점에서 양측 제1대구치 원심면까지의 구개봉합선을 따르는 구개형태곡선들이었다. 개체들간의 크기 차이 보정을 위해 측정부위를 각각 25mm, 35mm, 35mm로 조정하여 표준화 하였다. 표준화된 구개형태곡선들에서 직선거리 각 1mm에 해당되는 점들에서의 곡선 깊이를 소수점 3자리까지 수치화 하여 평균 구개형태곡선을 얻고, 그 좌표 차이를 95% 신뢰구간의 t-test를 통해 비교, 분석하여 다음과 같은 결론을 얻었다. 1. 양측 유견치를 연결한 횡단면상의 평균구개형태곡선은 반대교합아동이 좀더 평탄한 V자형의 곡선형태를 보였으나, 반대교합아동과 정상교합아동 사이에 통계적으로 유의할 만한 차이는 보이지 않았다(P>0.05). 2. 양측 제1대구치를 연결한 횡단면상의 평균구개형태곡선은 반대교합아동이 정상교합아동보다 더 구개의 깊이가 깊었으며, 상악 우측 제1대구치 치은 최하방점에서부터 8mm와 21mm위치 사이의 구간에서 통계적으로 유의할 만한 차이가 있었다(P<0.05). 3. 반대교합아동과 정상교합아동간의 구개봉합선의 평균구개형태곡선에서는 전구간에 걸쳐 반대교합아동이 더 깊은 곡선 형태를 보였고, 통계적으로도 유의할 만한 차이를 보였다(P<0.01).

• 한국의류학회지
• /
• 제33권7호
• /
• pp.1109-1120
• /
• 2009

This study develops a fitted torso type basic pattern for men by utilizing 3D body scan data. Recent fashion trends are reflected in the development of the pattern. The subjects were 15 men in their 20's, who wear size 95 (M size). Body scan data was obtained through a 3D whole body scanner (WB4, Cyberware, USA), and a body surface development figure for developing male fitted torso type basic pattern was attained through the use of Rapid Form 2006 as well as Auto CAD 2006 programs. The results are as follows: A body surface development figure through body surface segment method showed high exactitude in an error range of 100$\pm$1%. In addition, it occurred in an error range of 100:1:3% because of the hard scanning conditions in the incline of the shoulder and armpit areas. However, the body surface development figure as well as the direct measurement results can be used as basic data for the given patternmaking since the error range falls into 100$\pm$3%. Dart amounts obtained from the average cross section were center back 2.2cm (24.3%), back armpit point 3.8cm (41.8%), front armpit point 3.0cm (33.9%). As shown the jacket pattern, the biggest dart amount was portioned out at the back armpit point. The drafting equations for the development pattern acquired are as follows; Full width=C/2+5cm, back length=height/4-1cm, armhole depth=(C/10+12cm)+3cm, back width=2C/10+2cm, front width=2C/10. The development pattern was a fitted torso basic pattern that was composed of 3 pieces, so it would be very useful in developing shirt or jacket patterns. According to the results of the evaluation of the developed pattern appearance, it obtained higher scores of over 3.5 points in almost items, meaning that the developed pattern is appropriate for a male fitted torso type basic pattern. It suggests a possibility of patternmaking from a body surface development figure in 2-D to prototype.

• 한국병원경영학회지
• /
• 제22권2호
• /
• pp.28-43
• /
• 2017

The purpose of this study was to investigate the influence of professional self-concept and interpersonal relations on nursing competence of clinical nurses. This study was conducted as a descriptive cross sectional survey with 182 nurses who work at a tertiary hospital which has over 1,000 beds, located in Gyeounggi - do. The data was collected from October 11th, 2016 to October 28th, 2016. The main findings of this study were as follows. The mean score for professional self-concept was $2.65{\pm}0.29$ points in the range of 1 point to 4 points. And interpersonal relations was an average of $3.55{\pm}0.35$ points in the range of 1 point to 5 points. Nursing competence was an average of $2.65{\pm}0.39$ points in the range of 1 point to 4 points. Professional self-concept and interpersonal relations were positively correlated with nursing competence. Nursing competence was differed from clinical career(F=10.518, p<.001), working unit(F=4.139, p=.018), educational background(F=6.542, p=.002), and satisfaction on nursing(F=6.326, p<.001). The regression model with clinical career, working unit, educational background, satisfaction on nursing, 3 sub domain of professional self-concept(professional practice, satisfaction, communication), and interpersonal relation was statistically significant (F=31.94, p<.001). And this model could explain 51.5% of nursing competency(Adj R2=.515). Especially, professional practice(${\beta}=.532$, p<.001) of professional self-concept, interpersonal relations(${\beta}=.223$, p<.001), clinical career(${\beta}=.169$, p<.001), working unit: ICU (${\beta}=.169$, p<.05) were identified the factors influencing on nursing competence. Therefore, improving clinical nurses' nursing competence can be achieved with broad approach that includes improvements in professional self-concept and interpersonal relations. And also, working unit, and clinical career should be considered to develop the actual program for nursing competence, too.

• 대기
• /
• 제30권2호
• /
• pp.183-193
• /
• 2020

In this study, Yeongdong cold air damming (YCAD) cases that occur in winters have been selected using automatic weather station data of the Yeongdong region of Korea. The vertical and horizontal scales of YCAD were analyzed using rawinsonde and numerical weather model. YCAD occurred in two typical synoptic patterns such that low pressure and trough systems crossing and passing over Korea (low crossing type: LC and low passing type: LP). When the Siberian high does not expand enough to the Korean peninsula, low pressure and trough systems are likely to move over Korea. Eventually this could lead to surface temperature (3.1℃) higher during YCAD than the average in the winter season (1.6℃). The surface temperature during YCAD, however, was decrease by 1.3℃. The cold air layer was elevated around 120 m~450 m for LP-type. For LC-type, the cold layer were found at less than approximately 400 m and over 1,000 m, which could be thought of combined phenomena with synoptic and local weather forcing. The cross-sectional analysis results indicate the accumulation of cold air on the east mountain slope. Additionally, the north or northeasterly winds turned to the northwesterly wind near the coast in all cases. The horizontal wind turning point of LC-type was farther from the top of the mountain (52.2 km~71.5 km) than that of LP-type (20.0 km~43.0 km).

• 분석과 대안
• /
• 제7권2호
• /
• pp.35-77
• /
• 2023

This study aims to solve the entangled loop between demographic transition (DT) and economic growth by analyzing cross-country data. We undertake a national-level group analysis to verify the compressed transition of demographic variables over time. Assuming that the LA (latecomer advantage) on DT over time exists, we verify that the DT of the latecomer is compressed by providing a formal proof of LA on DT over income. As a DT has the double-kinked functions of income, we check them in multiple aspects: early maturation, leftward threshold, and steeper descent under a contour map and econometric methods. We find that the developing countries (the latecomer) have speedy DT (CDT, compressed DT) as well as speedy income such that DT of the latecomers starts at lower levels of income, lasts for a shorter period, and finishes at the earlier stage of economic development compared to that of developed countries (the early mover). To check the balance of DT, we classify countries into four groups of DT---balanced, slow, unilateral, and rapid transition countries. We identify that the main causes of rapid transition are due to the strong family planning programs of the government. Finally, we check the effect of latecomer's CDT on economic growth inversely: we undertake the simulation of the CDT effect on economic growth and the aging process for the latecomer. A worrying result is that the CDT of the latecomer shows a sharp upturn of the working-age population, followed by a sharp downturn in a short period. Compared to early-mover countries, the latecomer countries cannot buy more time to accommodate the workable population for the period of demographic bonus and prepare their aging societies for demographic onus. Thus, we conclude that CDT is not necessarily advantageous to developing countries. These outcomes of the latecomer's CDT can be re-interpreted as follows. Developing countries need power sources to pump up economic development, such as the following production factors: labor, physical and financial capital, and economic systems. As for labor, the properties of early maturation and leftward thresholds on DTs of the latecomer mean that demographic movement occurs at an unusually early stage of economic development; this is similar to a plane that leaks fuel before or just before take-off, with the result that it no longer flies higher or farther. What is worse, the property of steeper descent represents the falling speed of a plane so that it cannot be sustained at higher levels, and then plummets to all-time lows.

• 한국해양학회지
• /
• 제30권6호
• /
• pp.550-564
• /
• 1995

공간적으로 평활화하고 저주파 필터를 적용한 1978년부터 1987년까지 10년간의 일별 해상풍 자료를 이용하여 한국 주변해역에서의 해상풍의 시 ${\cdot}$ 공간적 분포특성을 연구하였다. 종관적 분포형태를 위해 해상풍의 연평균과 월평균 분포특성을 검토하였고, 시간적 변동성과 공간적 상관성을 위해 스펙트럼 분석을 하였다. 연평균 wind stress와 curl의 공간형태는 겨울철 월평균 형태와 매우 닮았다. 일년 및 반년주기성이 뚜렷하다. 연구해역에서 종관적 바람은 일년 및 반년 주기에서 공간적 상관성이 매우 높으나 각 해역별로 특징적 공간분포를 보인다. 예를들면, 겨울철 바람은 동해북부, 황해와 동중국해 북부에서는 북풍이 우세한 반면, 동해남부에서는 북서풍이, 동중국해 남부에서는 북동풍이 우세하다. 또한 curl의 경우는 동해북부와 동중국왜 남부에서는 양의 값을 보이나 동해남부와 황해 그리고 동중국해 북부에서는 음의 값을 보인다. 한편, 세력이 대단히 약해지는 여름철 바람은 겨울철 바람과 아주 다르고 열대성 저기압의 빈번한 통과로 동중국해 해상에서 시간변동이 커진다. 시베리아 고기압이 큰 영향을 끼치는 연변동은 북동에서 남서로, 즉 동해북부에서 동해남부 및 황해와 동중국해로 전파되는 경향을 보이나, 반년변동은 반대방향인 남서에서 북동으로 전파되는 점은 주목할 만하다. 반년 주기성은 한반도를 서에서 동으로 횡단하는 온대성 저기압이 봄과 가을에 발달하는 것을 나타내는 것으로 판단된다. 단주기 영역에서는 뚜렷한 주기성이 나타나지 않지만, 0.1 cycles per day (cpd) 이상에서는 황해와 동해의 지역풍이 공간적 상관성이 높고 위상도 주파수에 선형적으로 증가한다. 이러한 선형적 증가는 0.1, 0.3 cpd에서 550, 730 km/d의 위상속도에 해당하며 위상속도는 한반도를 서${\cdot}$동로 통과하는 온대성 저기압의 이동속도와 외형적으로 일치한다.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 2000년도 Proceedings of 2000 International Nano Crystals/Ceramics Forum and International Symposium on Intermaterials
• /
• pp.195-214
• /
• 2000

The high-speed steel (shorten as HSS) consists of Fe and several kinds of transition metal carbides. The cutting tools or wear-resistant materials made from HSS experience relatively high thermal shock because a coolant such as water or oil is flowed over the surface of heated HSS. The purpose of this research is to increase the hardness, strength, fracture toughness and thermal shock resistance of HSS. A possible strategy is to incorporate a hard ceramic material with high strength in HSS matrix. This paper describes the processing, microstructure and mechanical properties of the oriented unidirectional mullite fiber/HSS composite. The unidirectional mullite fibers of 10${\mu}{\textrm}{m}$ diameter were dispersed by the ultrasonic irradiation of 38 kHz in an ethylenglycol suspension containing HSS powder of 11${\mu}{\textrm}{m}$ median size. The dried green composites with 4-68 vol% fibers were hot-pressed for 2h at 100$0^{\circ}C$ in Ar atmosphere under a pressure of 39 MPa. The higher density was achieved in the composite with a lower content of fibers. The oriented unidirectional fibers were well dispersed in the HSS matrix. The average distance between the center of fibers in the cross section was close to the value calculated from the fiber fraction. No reaction occurred at the interfaces between HSS and mullite fibers in the composites. The composite with 13.6 vol% fibers showed 100 MPa of four point flexural strength at room temperature. The thermal expansion of composite with heating was influenced by the orientation of mullite fibers.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권8호
• /
• pp.2814-2832
• /
• 2014

As information society matures to an even higher level and as information technology becomes a necessity to our everyday lives, the needs to develop, support and satisfy personal and social needs without the limitation of time, space, and location have become a vital point to everyday lives. Smartphone users are increasing at a staggering rate but the research on mobile-Learning model and the implementation of m-Learning scenario are still behind the needs of the users. Therefore, this paper focuses on the design of 'repeatable and short-spanned m-Learning model' to meet the needs of the learners who are on the go and on the move with their smartphones. Smartphone users frequently reach out for their phones but compare to the frequencies, the actual span of time they spend per use are relatively and surprisingly short. One way to understand this phenomenon is that the users tend to immediately replace their smartphones with laptops or desktops whenever they are available. A leaning model was needed to reflect this short and frequent use, a use that is solely based on the smartphone environment. This proposed learning model first defines this particular setting and implements the model to real smartphone users over an 8 week period. To understand whether different learning backgrounds can influence this model, different schools with online and offline learning channels participated in the experiment. User survey was conducted after the experiment to get a better understanding of the smartphone users. Pretest and posttest were conducted before and after the experiment and the data were validated and analyzed using SPSS version 18.0 for PC. Preliminary descriptive statistics, multiple regression and cross validation was conducted for the analysis. The results showed that the proposed English Listening and Comprehension Mobile Digital Textbook (ELCMDT) had a positive effect on the learners in general and was more effective for learners who were already experienced with online learning.