• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.934-941
• /
• 2000

We measured the electron transport coefficients, the electron drift velocity W and the longitudinal diffusion coefficient $D_{L}$ in the 0.526% and 5.05% $C_{3}F_{8}$-Ar mixtures over the E/N range from 0.01 Td to 100 Td by the double shutter drift tube, and compared the measured results by Hunter et al. with those. We determined the inelastic collision cross sections for the $C_{3}F_{8}$ molecule by the comparison of the present measurements and the calculation of electron transport coefficients in the $C_{3}F_{8}$-Ar mixtures by using a multi-term Boltzmann equation analysis.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.6
• /
• pp.695-702
• /
• 1999

A cross-flow fan which constitutes a fan-duct system with a stabilizer and a scroll-casing is widely used in many air-ventilating and air-conditioning devices. The cross-flow fan system has many design parameters which have crucial influence on the performance and the noise characteristics of the devices, which means many difficulties during the design stage of the devices and the general design guide has not sufficiently established yet. This study presents the experimental results of the parameter investigation of some chosen design parameter values, which are the shapes of the stabilizers, the profiles of the scroll casing part, and the diffusion angles of the flow exit. The results are expressed by the varying performance characteristics with the values of the parameters. They are found to have considerable effects on the system performance and should be considered with care in the design stage. Finally some helpful guides for the design and manufacturing of the cross-flow fan system are proposed.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.47 no.2
• /
• pp.39-47
• /
• 2010

In Wireless Sensor Network, transmission errors are frequently occurred due to the node failure, battery discharge, and interference by objects. Although Directed Diffusion has been considered as a prominent Data-centric routing algorithm, it revealed some weaknesses at this kind of unexpected network errors. In order to address the problem, we proposed a radio-aware routing algorithm for improving reliability of Directed Diffusion in Wireless Sensor Networks. The proposed algorithm is aware of the network status based on the radio information of MAC and PHY layers using a cross-layer approach. The link quality and the node failure information from the acquired network status were used to decide an alternative path to provide a reliable data transmission in error-prone sensor networks. The proposed algorithm showed its effectiveness of the data delivery rate and data ratio with several simulations consisting of various error rates and the number of nodes.

• The Journal of the Korea Contents Association
• /
• v.8 no.11
• /
• pp.1-9
• /
• 2008

Thanks to the multimedia technology development, it is possible to show image representations in high quality and to process images in various ways. Anisotropic diffusion as an effective diffusion filtering among many image preprocessing methods and postprocessing methods is used in reduction of speckle noises of ultrasound images, image restoration, edge detection, and image segmentation. However, the conventional anisotropic diffusion based on a cross-kernel causes the following problems. The problem is the concentration of edges in the vertical or horizontal directions. In this paper, a new anisotropic diffusion transform based on directions of gradient is proposed. The proposed method uses the eight directional square-kernel which is an expanded form of the cross-kernel. The proposed method is to select directions of small gradient based on square-kernel. Therefore, the range of proposed diffusion is selected adaptively according to the number of the directions of gradient. Experimental results show that the proposed method can decrease the concentration of edges in the vertical or horizontal directions, remove impulse noise. The image in high quality can be obtained as a result of the proposed method.

• Journal of the Korean Chemical Society
• /
• v.42 no.2
• /
• pp.156-160
• /
• 1998

Probe diffusion with latex particles in two different types of chemically cross linked gel has been studied. The diffusion of particles in silica gel is decreased by decreasing the gel correlation length but the particles' diffusion in the acrylamide gel still shows the heterogeneity of the gel. By increasing the contents of the gel network the silica gel makes a more homogeneous and compact structure than that of acrylamide gel which has partial heterodyning. Dynamic light scattering study with the probe particles in two different gels reveals the heterogeneity of the gel network. The latex particles trapping in the gel has been investigated by using non-ergodic concepts.

• Nuclear Engineering and Technology
• /
• v.16 no.1
• /
• pp.21-28
• /
• 1984

The reduction of the truncation error including numerical diffusion, has been one of the most important tasks in the development of numerical methods. The stream line method is used to cancel cross numerical diffusion and some of the non-diffusion type truncation error. The two-step stream line method which is the combination of the stream line method and finite difference methods is developed in this work for the solution of the govern ing equations of incompressible buoyant turbulent flow. This method is compared with the finite difference method. The predictions of both classes of numerical methods are compared with experimental findings. Truncation error analysis also has been performed in order to the compare truncation error of the stream line method with that of finite difference methods.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1165-1168
• /
• 2005

We review discharge characteristics of fluorescent lamps having noncircular cross sections. The developmental and theoretical history of noncircular cross-section lamps is summarized chronologically. In particular, discharge characteristics of noncircular cross-section lamps will be summarized and analyzed including plasma contraction, electron temperature, and ambipolar diffusion loss, which might give us some insights into the way to develop more efficient and uniform flat fluorescent lamps, which have recently arisen as a new light source of large-size backlight units for LCD TV applications.

• Computers and Concrete
• /
• v.4 no.2
• /
• pp.157-166
• /
• 2007

The paper considers a theoretical model to study sulfate ion diffusion in saturated porous media - cement based mineral composites, accounting for simultaneous effects, such as filling micro-capillaries (pores) with ions and chemical products and liquid push out of them. Pore volume change and its effect on the distribution of ion concentration within the specimen are investigated. Relations for the distribution of the capillary relative radius and volume within the composite under consideration are found. The numerical algorithm used is further completed to consider capillary size change and the effects accompanying sulfate ion diffusion. Ion distribution within the cross section and volume of specimens fabricated from mineral composites is numerically studied, accounting for the change of material capillary size and volume. Characteristic cases of 2D and 3D diffusion are analyzed. The results found can be used to both assess the sulfate corrosion in saturated systems and predict changes occurring in the pore structure of the composite as a result of sulfate ion diffusion.

• Applied Microscopy
• /
• v.34 no.2
• /
• pp.95-102
• /
• 2004

The TEM samples prepared by ion milling have the advantage that thin area can be obtained from almost any materials. However, it has the disadvantage that the amount of thin area can often be quite limited. For the cross-sectioned samples and grossly heterogeneous materials, the thickness of less than $0.1{\mu}m$ can be achieved by mechanical grinding and polishing (tripod polisher) and then the TEM samples may be ion-milled for final thinning or cleaning. These approaches were described in this paper. Examples of TEM observations were taken from cross-section samples of thin films on silicon and sapphire, from diffusion layers between $Mo_5Si_3\;and\;Mo_2B$, and from rapidly solidified 304 stainless steel powders embedded in electroplated copper.

• Bulletin of the Korean Mathematical Society
• /
• v.41 no.2
• /
• pp.371-385
• /
• 2004

In this paper, we investigate the uniqueness of positive solutions to weak competition models with self-cross diffusion rates under homogeneous Dirichlet boundary conditions. The methods employed are upper-lower solution technique and the variational characterization of eigenvalues.