• Journal of Drive and Control
• /
• v.9 no.1
• /
• pp.18-24
• /
• 2012

The paper deals with the design of a new low-friction seal for a pneumatic cylinder with high speed actuation. The seal performance with variation of the cross sections in piston seals with elastomeric material was investigated to minimize the friction forces using ABAQUS. The contact stress and strain distributions and frictional forces of the piston seals were investigated with variation of interference fits, supply pressures and friction coefficients. To develop adequate and productive procedures, the finite element models of the piston seals were created and nonlinear analysis of a seal design was conducted in order to build further knowledge and understanding of the seal's performance characteristics.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.2
• /
• pp.272-280
• /
• 1997

Comparative study on the analysis and experiment for the vibration of a rotating cantilever structure was made in this paper. Analysis results were obtained by using the modeling method which was developed in the previous work. The cross-section thickness variation due to the sensor attachment was additionally considered. In order to verify the accuracy of the analysis results, exerimental results were obtained. The analysis and experimental results were found to be in a good agreement. It was also shown that the aerodynamic and cross-section thickness variation effects significantly influenced the dynamic characteristics of the rotating structure.

• Journal of the Institute of Convergence Signal Processing
• /
• v.5 no.4
• /
• pp.287-293
• /
• 2004

This paper proposes an efficient motion compensation algorithm for video sequences with brightness variations. In the proposed algorithm, the brightness variation parameters are estimated and local motions are compensated. To detect the frame with large brightness variations, we employ the frame classification based on the cross entropy between histograms of two successive frames, which can reduce the computational redundancy. Simulation results show that the proposed method yields a higher peak signal to noise ratio (PSNR) than that of the conventional methods, with a low computational load, when the video scene contains large brightness changes.

• Cross-Cultural Studies
• /
• v.25
• /
• pp.649-678
• /
• 2011

The purpose of this work is to explain categorial correlations between indirect evidentiality and epistemic modality on the basis of semantic, pragmatic usages of Russian so-called non-specialized lexical markers of evidentiality, such as kazhetsja, naverno, vidimo, poxozhe, dolzhno byt' etc. To do this, firstly I concentrated on the parameter of internal functional variation of a given parenthetic word. Secondly, I approached this topic from a typological perspective. Thirdly, I accepted Sweeter(1990)'s methodological assumption that etymological prototype of a given word plays a great role in grammatical, semantic, pragmatic changes. As a result, I could postulate general tendencies of grammaticalizations (or semantic, pragmatic, funtional changes) in the direction from epistemic modality to indirect evidentialty, which consists of inferentives, presumptives, and quotatives. For example, such a parenthetic word as kazhetsja can functions not only as a marker of epistemic modality of uncertainty, but also as inferentives. Besides, it is very interesting that this word lately has started to function as quotatives, too. This kind of functional variations are very characteristic in these spheres.

• Wind and Structures
• /
• v.24 no.2
• /
• pp.95-118
• /
• 2017

The present study revealed comparison the pressure distribution on the surfaces of regular cross plan shaped building with angular cross plan shaped building which is being transformed from basic cross plan shaped building through the variation of internal angles between limbs by $15^{\circ}$ for various wind incidence angle from $0^{\circ}$ to $180^{\circ}$ at an interval of $30^{\circ}$. In order to maintain the area same the limbs sizes are slightly increased accordingly. Numerical analysis has been carried out to generate similar nature of flow condition as per IS: 875 (Part -III):1987 (a mean wind velocity of 10 m/s) by using computational fluid dynamics (CFD) with help of ANSYS CFX ($k-{\varepsilon}$ model). The variation of mean pressure coefficients, pressure distribution over the surface, flow pattern and force coefficient are evaluated for each cases and represented graphically to understand extent of nonconformities due to such angular modifications in plan. Finally regular cross shaped building results are compared with wind tunnel results obtained from similar '+' shaped building study with similar flow condition. Reduction in along wind force coefficients for angular crossed shaped building, observed for various skew angles leads to develop lesser along wind force on building compared to regular crossed shaped building and square plan shaped building. Interference effect within the internal faces are observed in particular faces of building for both cases, considerably. Significant deviation is noticed in wind induced responses for angular cross building compared to regular cross shaped building for different direction wind flow.

• Nuclear Engineering and Technology
• /
• v.55 no.11
• /
• pp.4026-4031
• /
• 2023

In this article, we report a new empirical formula for quick calculation of cross sections of (n, α) reactions with 14-15 MeV neutrons. Cross sections are analysed in terms of the compound nucleus model. A systematic trend for 14-15 MeV neutrons is found in the variation of (n, α) reaction cross sections with the parameters (N - Z + 1), (E_n + Q)^0.5 and N/Z. The empirical relation between the cross sections and these parameters has been obtained, which give fairly good fits with the experimental data. We have also investigated the odd-even effects on (n, α) cross sections considering binding energy systematic of the shell model. The present formula is very useful in predicting of the (n, α) cross sections, where the measurements are not available as well as in testing new experimental data.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.117-120
• /
• 1996

In this paper, a new approach to acquire the cross-sentional image for automatic solder joint inspection of double-sided PCB using X-ray source is presented. We designed the apparatus with fixed X-ray source to realize the cross-sectional image by tunning object and detector synchronously. The cross-sectional images are captured at several view angle of X-ray source, the geometric image distortions caused by view angle and the shape of image intensifier are compensated. The precision variation of cross-sectional image by the change of view angle was investigated. Also we acquired the cross-sectional image to the solder joint of double-sided PCB and reconstructed the shape of solder joint.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.5
• /
• pp.389-395
• /
• 2016

In this paper, vibration characteristics in terms of the airfoil cross-sectional shape was examined by using the EDISON co-rotational plane beam-transient analysis. Co-Rotational plane beam analysis is appropriate for large rotation and small strain. Assuming aircraft wing as a cantilevered beam, natural frequencies of each airfoil cross-sectional shape were estimated using VABS program and fast Fourier transformation(FFT). VABS conducts finite element analysis on the cross-section including the detailed geometry and material distribution to estimate the beam sectional properties. Under the same airfoil geometric configuration and material selection, variation of material induced difference in the deflection and natural frequencies. It was observed that variation of the natural frequency was dependent on variation of the airfoil shape and material.

• Phonetics and Speech Sciences
• /
• v.11 no.1
• /
• pp.19-27
• /
• 2019

Lateral approximants are well known as having complex articulatory characteristics, which vary cross-linguistically, across speakers, and across utterances. However, less attention has been paid to the articulation of Korean laterals, which do not contrast with a rhotic and may thus exhibit greater-than-normal variability. The focus of this study is to investigate the general articulatory characteristics of the Korean lateral [l] as well as the articulatory variation using novel 3D ultrasound imaging methods. The results of this study revealed significant between-speaker variation and some vowel-dependent variation with regard to the articulation of the Korean lateral [l], which has not been reported previously. Even though all participants in this study showed an anterior occlusion, the place of articulation and the size of the occlusion varied greatly across speakers. The data also revealed that left-right asymmetry is present in the articulation of the Korean lateral. The individual variation of the Korean lateral [l] suggests that it has a large articulatory-acoustic space for variation, since it has no contrasting sound that causes perceptual confusion.

• Korean Journal of Clinical Laboratory Science
• /
• v.36 no.2
• /
• pp.121-126
• /
• 2004

The primary goal of six sigma is to improve patient satisfaction, and thereby profitability, by reducing and eliminating defects. Defects may be related to any aspect of customer satisfaction: high product quality, schedule adherence, cost minimization, process capability indices, defects per unit, and yield. Many six sigma metrics can be mathematically related to the others. Literally, six means six standard deviations from the mean or median value. As applied to quality metrics, the term indicates that failures are at least six standard deviations from the mean or norm. This would mean about 3.4 failures per million opportunities for failure. The objective of six sigma quality is to reduce process output variation so that on a long term basis, which is the customer's aggregate experience with our process over time, this will result in no more than 3.4 defect Parts Per Million(PPM) opportunities (or 3.4 Defects Per Million Opportunities. For a process with only one specification limit (upper or lower), this results in six process standard deviations between the mean of the process and the customer's specification limit (hence, 6 Sigma). The results of applicative six sigma experiment studied on 18 items TP, ALB, T.B, ALP, AST, ALT, CL, CK, LD, K, Na, CRE, BUN, T.C, GLU, AML, CA tests in clinical chemistry were follows. Assessment of process performance fits within six sigma tolerance limits were TP, ALB, T.B, ALP, AST, ALT, CL, CK, LD, K, Na, CRE, BUN, T.C, GLU, AML, CA with 72.2%, items that fit within five sigma limits were total bilirubin, chloride and sodium were 3 sigma. We were sure that the goal of six sigma would reduce test variation in the process.