• Journal of Conservation Science
• /
• v.34 no.3
• /
• pp.157-166
• /
• 2018

In this study, gelatin binding ability was increased by adding cross linking agent to improve adhesive characteristic of animal glue. Animal glue added genipin measured gel strength and viscosity, the structural analysis, the color retention degree, elution degree, and rupture strength. And the water resistance and ultraviolet light resistance with the addition of genipin were compared. As a result of the study, the gel strength and viscosity increased with the amount of genipin. As a result of the structural analysis, in gelatin, the absorption peak of the triple structure of collagen structurally stabilized was observed. As a result of the color retention degree, the film was observed because of the lowered brightness. The amount of elution glue was increased with addition of genipin at $50^{\circ}C$ distilled water condition and rupture strength has increased with the amount of genipin. In the water resistance and light fastness, there was no appearance before and after deterioration due to the addition of genipin. Based on the results of this study, it confirmed the adhesive characteristics of animal glue added genipin and examined the experimental method applicable for animal glue. After the addition of genipin, flexibility, re-solving, adhesive force, and curing speed, which are unique characteristics of glue, can be improved without disappearing, so it is expected that it will be applicable to production of animal glue and conservation of cultural heritage when homogeneous glue is secured.

• Corrosion Science and Technology
• /
• v.9 no.4
• /
• pp.147-152
• /
• 2010

Conventional paints for conversion coating applications in steel production derived mainly from water-based polymer dispersions containing several additives actually show good general performance, but suffer from poor scratch and abrasion resistance during use. The reason for this is because the relatively soft organic binder matrix dominates the mechanical surface properties. In order to maintain the high quality and decorative function of coated steel sheets, the mechanical performance of the surface needs to be improved significantly. In fact the wear resistance should be enhanced without affecting the optical appearance of the coatings by using appropriate nanoparticulate additives. In this direction, nanocomposite coating compositions (Nanomer$^{(R)}$) have been derived from water-based polymer dispersions with an increasing amount of surface-modified nanoparticles in aqueous dispersion in order to monitor the effect of degree of filling with rigid nanoparticles. The surface of nanoparticles has been modified for optimum compatibility with the polymer matrix in order to achieve homogeneous nanoparticle dispersion over the matrix. This approach has been extended in such a way that a more expanded hybrid network has been condensed on the nanoparticle surface by a hydrolytic condensation reaction in addition to the quasi-monolayer type small molecular surface modification. It was expected that this additional modification will lead to more intensive cross-linking in coating systems resulting in further improved scratch-resistance compared to simple addition of nanoparticles with quasi-monolayer surface modification. The resulting compositions have been coated on zinc-galvanized steel and cured. The wear resistance and the corrosion protection of the modified coating systems have been tested in dependence on the compositional change, the type of surface modification as well as the mixing conditions with different shear forces. It has been found out that for loading levels up to 50 wt.-% nanoparticles, the mechanical wear resistance remains almost unaffected compared to the unmodified resin. In addition, the corrosion resistance remained unaffected even after $180^{\circ}$ bending test showing that the flexibility of coating was not decreased by nanoparticle addition. Electron microscopy showed that the inorganic nanoparticles do not penetrate into the organic resin droplets during the mixing process but rather formed agglomerates outside the polymer droplet phase resulting in quite moderate cross linking while curing, because of viscosity. The proposed mechanisms of composite formation and cross linking could explain the poor effect regarding improvement of mechanical wear resistance and help to set up new synthesis strategies for improved nanocomposite morphologies, which should provide increased wear resistance.

• Journal of Periodontal and Implant Science
• /
• v.40 no.5
• /
• pp.232-238
• /
• 2010

Purpose: To prolong the degradation time of collagen membranes, various cross-linking techniques have been developed. For cross-linking, chemicals such as formaldehyde and glutaraldehyde are added to collagen membranes, but these chemicals could adversely affect surrounding tissues. The aim of this study is to evaluate the ability of porous non-chemical cross-linking porcine-derived collagen nanofibrous membrane to enhance bone and associated tissue regeneration in one-wall intrabony defects in beagle dogs. Methods: The second and third mandibular premolars and the first molars of 2 adult beagles were extracted bilaterally and the extraction sites were allowed to heal for 10 weeks. One-wall intrabony defects were prepared bilaterally on the mesial and distal side of the fourth mandibular premolars. Among eight defects, four defects were not covered with membrane as controls and the other four defects were covered with membrane as the experimental group. The animals were sacrificed 10 weeks after surgery. Results: Wound healing was generally uneventful. For all parameters evaluating bone regeneration, the experimental group showed significantly superior results compared to the control. In new bone height (NBh), the experimental group exhibited a greater mean value than the control ($3.04{\pm}0.23\;mm/1.57{\pm}0.59$, P=0.003). Also, in new bone area (NBa) and new bone volume (NBv), the experimental group showed superior results compared to the control (NBa, $34.48{\pm}10.21%$ vs. $5.09{\pm}5.76%$, P=0.014; and NBv, $28.04{\pm}12.96$ vs. $1.55{\pm}0.57$, P=0.041). On the other hand, for parameters evaluating periodontal tissue regeneration, including junctional epithelium migration and new cementum height, there were no statistically significant differences between two groups. Conclusions: Within the limitations of this study, this collagen membrane enhanced bone regeneration at one-wall intrabony defects. On the other hand, no influence of this membrane on periodontal tissue regeneration could be ascertained in this study.

• Journal of environmental and Sanitary engineering
• /
• v.16 no.2
• /
• pp.91-99
• /
• 2001

Cross linked chitosan beads showed high selective adsorption abilities in order of $Au^{3+}$ > $Hg^{2+}$ > $Cu^{2+}$ > $Cd^{2+}$ > $Pt^{4+}$ > ${UO_2}^{2+}$ ions in mixed solution of various metal ions at pH 4.5. N-methyltyiobenzylated chitosan beads(MTB-chitosan beads) were prepared treating with p-(methylthio) benzaldehyde after cross linking of chitosan beads to give them a high selectivity in adsorption of metal ions. The MTB-chitosan beads demonstrated their selectivity on precious metals among various metal ions distinctively. Particularly, the MTB-chitosan had a peculiar selective adsorption on $Pd^{2+}$, $Au^{2+}$, and $Hg^{2+}$ions whilst the cross linked chitosan beads showed its high adsorption on $Pd^{2+}$ at pH 1.1. On the other hand, the cross linked chitosan beads showed its superiority in selective adsorption on $Au^{2+}$, $Cu^{2+}$, and $Hg^{2+}$ions to the MTB-chitosan at pH 4.5 of the test solution. Thus metal selectivities were given to chitosan beads through chemical modifications.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.23 no.3
• /
• pp.191-195
• /
• 2013

This paper proposes an automatic method for discovering cross-lingual links from English Wikipedia documents to Korean ones in order to increase connectivity among vast web resources. Compared to the existing methods roughly estimating link probability of phrases, candidate anchors are selected from English documents by using various information such as title lists and linking probability extracted from Wikipedia dumps and the results of named-entity recognition, and the anchors are translated into Korean words, and then the most suitable Korean documents with the words are selected as cross-lingual links. The experimental results showed 0.375 of MAP.

• Biomolecules & Therapeutics
• /
• v.17 no.1
• /
• pp.98-103
• /
• 2009

Superparamagnetic iron oxide nanoparticles (SPIOs)-embedded chitosan microspheres were developed for magnetic resonance (MR)-traceable embolotherapy. SPIOs-loaded chitosan microspheres were prepared by emulsion and cross-linking technique and 100-200 ${\mu}m$ sized spherical microsparticles were obtained. Loading efficacy and loading amount of SPIOs in microspheres were about 40% and 0.26-0.32%, respectively, when measured by inductively coupled plasma atomic emission spectroscopy. Within 30 days, about 60% of the incorporated SPIOs were released from low cross-linked microspheres, whereas only about 40% of SPIOs was released from highly cross-linked microspheres. Highly cross-linked microspheres were more efficient for lower degree of swelling leading to secure entrapment of SPIOs in matrix. Prepared novel embolic microspheres are expected to be practically applicable for traceable embolotherapy with high resolution and sensitivity through magnetic resonance imaging (MRI).

• Journal of the Korean Chemical Society
• /
• v.56 no.1
• /
• pp.169-174
• /
• 2012

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1247-1250
• /
• 2008

This presentation highlights work from the authors' laboratories on the various kinds of oxide optical materials, mainly luminescence and pigment materials with different forms (powder, core-shell structures, thin film and patterning) prepared by the Pechini-type sol-gel (PSG) process. The PSG process which uses the common metal salts (nitrates, acetates, chlorides etc) as precursors and citric acid (CA) as chelating ligands of metal ions and polyhydroxy alcohol (such as ethylene glycol or poly ethylene glycol) as cross-linking agent to form a polymeric resin on molecular level, allowing the preparation of many forms of luminescent materials.

• Journal of the Korean Data and Information Science Society
• /
• v.16 no.4
• /
• pp.899-911
• /
• 2005

This paper conducts an explanatory analysis of the web sphere produced by National Assemblymen in South Korea, using some statistical methods. First, some descriptive metrics were employed. Next, the traditional methods of multi-variate analyses, multidimensional scaling and corresponding analysis, were applied to the data. Finally, cross-sectional data were compared to examine a change over time.

• Korea-Australia Rheology Journal
• /
• v.19 no.3
• /
• pp.117-123
• /
• 2007

There has been considerable interest in recent years in field-responsive suspensions, which are of some importance in industry in many different applications. The microstructure of these materials is a significant issue which can be probed by rheological measurements. In this study, measurements were made of a magnetorheological fluid (MRF) under steady and oscillatory shear flow, with and without a magnetic field. Mathematical inversion was used to derive the relaxation time spectrum of the MRF from oscillatory shear data. Experimental evidence is presented of the gel-like properties of this MRF.