• 한국전자통신학회논문지
• /
• 제7권1호
• /
• pp.61-67
• /
• 2012

코드분할 다중접속(CDMA) 시스템에서 대역확산 기법으로 사용되는 확산수열은 다중접속 간섭을 줄이고 높은 보안성을 위하여 상호상관관계가 낮고 선형복잡도가 큰 것으로 채택하는 것이 바람직하다. 그러나 수열군의 개수를 늘리고 선형복잡도를 높이기 위해서는 상호상관관계를 어느 정도 높이는 것은 불가피하다. 본 논문에서는 수열군의 개수가 크고 선형복잡도가 높은 확장 Zeng 수열을 제안하고 그 상호상관관계를 분석한다.

• 한국소음진동공학회논문집
• /
• 제19권4호
• /
• pp.355-362
• /
• 2009

Sound source localization method based on the time delay of arrival(TDOA) is applied to many research fields such as a robot auditory system, teleconferencing and so on. When multi-microphones are utilized to localize the source in 3 dimensional space, the conventional localization methods based on TDOA decide the actual source position using the TDOAs from all microphone arrays and the detection measure, which represents the errors between the actual source position and the estimated ones. Performance of these methods usually depends on the number of microphones because it determines the resolution of an estimated position. In this paper, we proposed the localization method using spatially mapped GCC functions. The proposed method does not use just TDOA for localization such as previous ones but it uses spatially mapped GCC functions which is the cross correlation function mapped by an appropriate mapping function over the spatial coordinate. A number of the spatially mapped GCC functions are summed to a single function over the global coordinate and then the actual source position is determined based on the summed GCC function. Performance of the proposed method for the noise effect and estimation resolution is verified with the real environmental experiment. The mean value of estimation error of the proposed method is much smaller than the one based on the conventional ones and the percentage of correct estimation is improved by 30% when the error bound is ${\pm}20^{\circ}$.

• 천문학회보
• /
• 제46권1호
• /
• pp.47.2-47.2
• /
• 2021

Focusing on both small separations and baryonic acoustic oscillation scales, the cosmic evolution of the clustering properties of peak, void, wall, and filament-type critical points is measured using two-point correlation functions in ΛCDM dark matter simulations as a function of their relative rarity. A qualitative comparison to the corresponding theory for Gaussian random fields allows us to understand the following observed features: (i) the appearance of an exclusion zone at small separation, whose size depends both on rarity and signature (i.e. the number of negative eigenvalues) of the critical points involved; (ii) the amplification of the baryonic acoustic oscillation bump with rarity and its reversal for cross-correlations involving negatively biased critical points; (iii) the orientation-dependent small-separation divergence of the cross-correlations of peaks and filaments (respectively voids and walls) that reflects the relative loci of such points in the filament's (respectively wall's) eigenframe. The (cross-) correlations involving the most non-linear critical points (peaks, voids) display significant variation with redshift, while those involving less non-linear critical points seem mostly insensitive to redshift evolution, which should prove advantageous to model. The ratios of distances to the maxima of the peak-to-wall and peak-to-void over that of the peak-to-filament cross-correlation are ~2-√~2 and ~3-√~3WJ, respectively, which could be interpreted as the cosmic crystal being on average close to a cubic lattice. The insensitivity to redshift evolution suggests that the absolute and relative clustering of critical points could become a topologically robust alternative to standard clustering techniques when analysing upcoming surveys such as Euclid or Large Synoptic Survey Telescope (LSST).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1990년도 추계학술대회 논문집 학회본부
• /
• pp.375-379
• /
• 1990

A microprocessor-based multi-function switchgear for the protection, measurement and control of the power system is presented. For the extraction of the RMS values of the fundamental components of current and voltage signals, a simple digital filter based on cross-correlation of the distorted signal with even and odd heptagonal waves is used. The frequency response of this filter is almost identical to that of the filter based on the discrete fourier transform, while its computational requirement is far less. For the time delay element relaying, a new log-table based relaying algorithm is suggested. The suggested use of the heptagonal wave cross-correlation digital filter algorithm and a new relaying algorithm reduce the computational needs so drastically that all functions of the switchgear can be implemented on the microprocessor system. Real time testing of the implemented daboratory prototype show good practical response under different operating conditions.

• 조명전기설비학회논문지
• /
• 제27권8호
• /
• pp.21-29
• /
• 2013

The functional behaviors of human standing postural control were investigated when they were exposed to long-term horizontal vibration in the sagittal plane. For complexity of human postural control, a useful alternative method that has been based on a black-box approach was taken; that is, where the feedback mechanism was lumped into a single element. A motor-driven support platform was designed as a source of vibration. The AC Servo-controlled motors produced continuous anterior/posterior (AP) motion. The data were analyzed both in the time and frequency domain. The cross-correlation and coherency functions were estimated. Subjects behaved as a non-rigid pendulum with a mass and a spring throughout the whole period of the platform motion, as consistent with the plan chosen for this study.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 신호처리소사이어티 추계학술대회 논문집
• /
• pp.321-324
• /
• 2003

This paper presents a novel system that analyzes and recognizes a gait based on shape context on silhouette images. The main functions of the system consist of three steps: First, the system extracts the silhouette images from galt image sequence by performing a simple pre-processing and acquires the AGM(Averaged Gait Map) by averaging them. Next. it computes the cross-correlation between the AGMs. Finally, it classifies the AGMs based on the cross-correlation using nearest neighborhood classification. The proposed system uses two cues to classify a gait: One corresponds to biometric shape cue such as body height width. and body-part proportions. The other corresponds to gait cue such as stride length and amount of arm swing. Perceptionally, the biometric cues are sailent on the double support (both legs spread and touching the ground) while the gait cues on the midstance. Through a variety of experiments, it is proved that the property of a gait is mainly influenced by gait cues than biometric cues.

• ETRI Journal
• /
• 제36권4호
• /
• pp.545-553
• /
• 2014

This paper proposes an algorithm to sense orthogonal frequency-division multiplexing (OFDM) signals in cognitive radio (CR) systems. The basic idea behind this study is when a primary user is occupying a wireless channel, the covariance matrix is non-diagonal because of the time domain cross-correlation of the cyclic prefix (CP). In light of this property, a new decision metric that measures the power of the data found on two minor diagonals in the covariance matrix related to the CP is introduced. The impact of synchronization errors on the signal detection is analyzed. Besides this, a likelihood-ratio test is proposed according to the Neyman-Pearson criterion after deriving probability distribution functions of the decision metric under hypotheses of signal presence and absence. A threshold, subject to the requirement of probability of false alarm, is derived; also the probabilities of detection and false alarm are computed accordingly. Finally, numerical simulations are conducted to demonstrate the effectiveness of the proposed algorithm.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2007년도 정기총회 및 학술발표대회
• /
• pp.133-136
• /
• 2007

한반도의 단주기 표면파의 특성을 연구하기 위하여 기상청 지진관측망에서 관측된 지진자료에 잡음의 상호상관기법(Campillo and Paul, 2003; Shapiro et al., 2005)을 적용하였다. 다론 시간에 관측된 지진자료의 에너지를 평준화시키기 위해 1 비트 샘플링 방법이 아닌 화이트닝 기법을 사용한 것을 제외하고 일반적인 상호상관기법이 그대로 적용되었다. 잡음상호상관기법으로 얻어진 그린함수에서 다중필터기법으로 군속도를 계산하였다. 군속도를 역산하여 0.5 - 20 초 주기에서 표면파 분산의 공간적인 변화를 이미지화하였다. 사용된 토모그래피 역산기법은 각 주기의 공간적인 이미지 뿐만 아니라 주기함수인 분산 곡선을 동시에 구하기 위하여 모든 주기의 군 속도자료를 역산하였다. 역산결과, 한반도 남동부 지역인 경상분지에서 낮은 군속도를 확인할 수 있었다.

• 한국정보통신학회논문지
• /
• 제17권3호
• /
• pp.619-626
• /
• 2013

여러 가지 디지털통신 시스템에서 많이 사용되고 있는 의사 난수열을 설계하는데 있어 가장 중요한 문제는 생성된 수열들 사이의 상호상관관계가 낮은 수열을 생성하는 것이다. 본 논문에서는 Gold 계열의 수열의 합성으로 이루어지는 새로운 이진수열군 $S^r=\{Tr_1^m\{[Tr_m^n(a{\alpha}^t+{\alpha}^{dt})]^r\}{\mid}a{\in}GF(2^n),\;0{\leq}t<2^n-1\}$를 제안하고 $d=2^{n-1}(3{\cdot}2^m-1)$일 때 상호상관관계 함숫값을 구한다. 여기서 n=2m이고 gcd(r, $2^m-1$)=1이다. 또한 특별한 r에 대하여 이진수열군 $S^r$의 선형스팬을 분석한다. 제안된 수열은 Gold 계열 수열의 확장이기도 하고 GMW수열의 확장이기도 하다.

• Structural Engineering and Mechanics
• /
• 제20권4호
• /
• pp.477-493
• /
• 2005

In case of Mindlin plate, not only the bending deformation but also the shear behavior is allowed. While the bending and shear stiffness are given in the same order in terms of elastic modulus, they are in different order in case of plate thickness. Accordingly, bending and shear contributions have to be dealt with independently if the stochastic finite element analysis is performed on the Mindlin plate taking into account of the uncertain plate thickness. In this study, a formulation is suggested to give the response variability of Mindlin plate taking into account of the uncertainties in elastic modulus as well as in the thickness of plate, a geometrical parameter, and their correlation. The cubic function of thickness and the correlation between elastic modulus and thickness are incorporated into the formulation by means of the modified auto- and cross-correlation functions, which are constructed based on the general formula for n-th joint moment of random variables. To demonstrate the adequacy of the proposed formulation, a plate with various boundary conditions is taken as an example and the results are compared with those obtained by means of classical Monte Carlo simulation.