• 한국소음진동공학회논문집
• /
• 제22권8호
• /
• pp.791-799
• /
• 2012

In this paper free vibration analysis of symmetric and cross-ply elastic laminated shells based on FSDT was performed through discretization of equations of motion and boundary condition. Structural model of laminated composite cylindrical shells subjected to a combination of magnetic and thermal fields is developed via Hamilton's variational principle. These coupled equations of motion are based on the electromagnetic equations(Faraday, Ampere, Ohm, and Lorenz equations) and thermal equations which are involved in constitutive equations. Variations of dynamic characteristics of composite shells with applied magnetic field, temperature gradient, and stacking sequence are investigated and pertinent conclusions are derived.

• Communications for Statistical Applications and Methods
• /
• 제12권3호
• /
• pp.713-727
• /
• 2005

Among different regression approaches, nonparametric procedures perform well under different conditions. In practice it is very hard to identify which is the best procedure for the data at hand, thus model combination is of practical importance. In this paper, we focus on one dimensional regression with fixed design. Polynomial regression, local regression, and smoothing spline are considered. The data are split into two parts, one part is used for estimation and the other part is used for prediction. Prediction performances are used to assign weights to different regression procedures. Simulation results show that the combined estimator performs better or similarly compared with the estimator chosen by cross validation. The combined estimator generates a similar risk to the best candidate procedure for the data.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1995년도 봄 학술발표회 논문집
• /
• pp.372-377
• /
• 1995

Expert systems which represent the appllication of artificial intelligence research are now nearly 20 years old. It is said that the present technology together with ever- increasing computing applicability of Combined Hypertext-Expert System Techniques to the design of reinforced concrete structures. Hypertext systems allow the user to control the system while expert systems alone don't give the user any control over the system. Therefore the combination of these two techniques, offered by KnowledgePro, may bring us closer to real user-expert communication. The system developed in this work offers information on design in general by reorganizing ACI Manual 318-89, detailed stress analysis and cross sectional design of simple PC/RC beams and optimum design of reinforced concrete building frames. The system also includes the author's earlier work on guidance to identify types of cracks in concrete. It is also includes the author's earlier work on guidance to identify types of cracks in concrete. It is also demonstrated how well and conveniently existing programs can be used by reorganizing the user manuals in the context of hypertext.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.835-840
• /
• 2002

The purpose of this study is to analyze the reinforcement effect of the RC compressive member confined with carbon fiber sheets and to suggest better transverse confinement coefficient(k$_1$) than one's in the existing analysis equations. Showing amounts of CPS in terms of ratio of transverse reinforcement to cross-section, it comes to be possible to calculate the objective and quantitative reinforcement amounts and to estimate the overlapping length of CFS that can influence on all its confinement effect. The previous parameters were compared using the existing experimental test data, then analyzed for the merits and demerits of existing parameters through the coefficient of correlation(R). The proposed parameters were derived in such a way that established parameters and their combination were obtained from the analytical study and then determined by regression analysis using the previous test data.

• 한국정밀공학회지
• /
• 제14권3호
• /
• pp.41-49
• /
• 1997

Laser spot welding offers a unique combination of high speed. precision and low heat distortion, compared with conventional resistance spot welding. This combinatin of advantages is especially attractive for the automotive industry. Until now automobile fabrication is widely used resistance spot welding, however, because of geometric and structural problem, spot welding is required many welding machine in that reason by substituting spot welding with laser welding, it save the equipment cost. In the present study we measured ultimate strength and observed bead cross section of laser welded specimen and compared with that of the resistance spot welding results in order to adapt laser welding in automobile industry. Also for strength esti- mation we calculated the residual stress of laser welded zone. All calculations are performed with the ABAQUS code on a workstation.

• Wind and Structures
• /
• 제30권3호
• /
• pp.299-316
• /
• 2020

Based on wind tunnel tests, this paper investigates the aerodynamic behavior of a large span canopy roof with elliptical plan and hyperbolic paraboloid shape. The statistics of pressure coefficients and the peak factor distributions are calculated for the top and bottom faces of the roof, and the Gaussian or non-Gaussian characteristics of the pressure time-histories in different areas of the roof are discussed. The cross-correlation of pressures at different positions on the roof, and between the top and bottom faces is also investigated. Combination factors are also evaluated to take into account the extreme values of net loads, relevant to the structural design of canopies.

• Journal of Multimedia Information System
• /
• 제6권4호
• /
• pp.173-178
• /
• 2019

Mongolian historical and cultural monuments on settlement areas of stone inscriptions, stone images, rock-drawings, remains of cities, architecture are still telling us their stories. These monuments depict the understanding of the word, philosophical and artistic outlook, beliefs, religion, national art, language, culture and traditions of Mongols [1]. Nowadays computer science, especially computer vision is applying in the other science fields. The main problem is how to apply and which algorithm can detect and classify the objects correctly. In this paper, we propose a method to detect object from Mongolian nomadic environment images. This work proposes a method for object detection that is the combination of the binary operations in the edge detection results. We found out the best method and parameters of state-of-the-art machine learning algorithms. In experimental result, we evaluate our results with 10-fold cross validation and split 66% strategies.

• 한국임상수의학회지
• /
• 제18권2호
• /
• pp.160-163
• /
• 2001

A 8 months old female dog with the combination of a fracture of the proximal tibia (Salter-Harris type I) with an avulsion of the tibial tuberosity was repaired with cross intramedullary pin for proximal tibial physeal fracture, and intramedullary pin combined with tension band wire for avulsion fracture of tibial tuberosity, resulted in complete healing. At 45 days after operation, on the radiological views, there was premature closure of growth plate of proximal tibia and tibial tuberosity, but at 7 months no developing growing deformities.

• 대한한의학원전학회지
• /
• 제22권4호
• /
• pp.167-176
• /
• 2009

This study aim to organize knowledge of the Oriental Medicine using the 'Wisdom of Crowds', and also results could be learned effectively. The progress of the research aims to understand the classic documents easily using the existing systems resources that is related to the information Oriental Medicine. As a result, the system that could understand how to deal with the existing definition of terms individually easily via cross reference, and also sort out and arrange without damaging the order of documents related to the Oriental Medicine was built up. In return, the system that could be handled by many participants could create and edit the knowledge of the Oriental Medicine together.

• International Journal of Control, Automation, and Systems
• /
• 제4권4호
• /
• pp.456-465
• /
• 2006

The problem of recursive filtering far linear discrete-time systems with uncertainties is considered. A new suboptimal filtering algorithm is herein proposed. It is based on the fusion formula, which represents an optimal mean-square linear combination of local Kalman estimates with weights depending on cross-covariances between local filtering errors. In contrast to the optimal weights, the suboptimal weights do not depend on current measurements, and thus the proposed algorithm can easily be implemented in real-time. High accuracy and efficiency of the suboptimal filtering algorithm are demonstrated on the following examples: damper harmonic oscillator motion and vehicle motion constrained to a plane.