• 정보처리학회논문지B
• /
• 제10B권7호
• /
• pp.811-814
• /
• 2003

본 논문에서는 십자패턴과 육각패턴을 이용한 고속 블록 정합 동작 예측 기법을 제안한다. 블록 기반 탐색에서 전역 탐색방법이 가장 좋은 동작벡터를 찾지만, 탐색영역 내의 모든 전을 검색하기 때문에 많은 시간을 필요로 하게 된다. 본 방법은 대부분의 동영상에서 동작벡터가 블록의 중심 부근에 집중적으로 분포함을 착안하여 십자패턴으로 중앙을 우선 탐색한 다음 움직임이 큰 동작벡터를 육각패턴을 사용하여 찾는다. 실험결과, 본 방법은 기존의 탐색방법보다 화질과 탐색시간에서 대부분의 경우에 좋은 성능을 보임을 알 수 있다.

• 동력기계공학회지
• /
• 제17권1호
• /
• pp.64-70
• /
• 2013

The heat transfer and friction factor characteristics of turbulent flows in three stationary channels have been investigated experimentally to check out the effect of divergence ratio. These are a constant cross-sectional channel and two diverging channels with ratio of divergence(Dho/Dhi) of 1.16 and 1.49. The measurement was conducted within the range of Reynolds numbers from 15,000 to 89,000 and the dimension of uniform cross-sectional test section is $100mm{\times}100mm$ at the cross section and 1,000 mm in length. The measurements of heat transfer coefficients and friction factors in the uniform channels were conducted as a reference. Because of the streamwise flow deceleration, the heat transfer and friction factor characteristics in the diverging channel were quite different from those of the constant cross-sectional channel. The effective friction factors and convective heat transfer coefficients increased with increasing the ratio of divergence of the channel.

• Journal of the Korean Data and Information Science Society
• /
• 제25권3호
• /
• pp.677-684
• /
• 2014

Support vector quantile regression (SVQR) is capable of providing more complete description of the linear and nonlinear relationships among random variables. To improve the estimation performance of SVQR we propose to use SVQR ensemble with bagging (bootstrap aggregating), in which SVQRs are trained independently using the training data sets sampled randomly via a bootstrap method. Then, they are aggregated to obtain the estimator of the quantile regression function using the penalized objective function composed of check functions. Experimental results are then presented, which illustrate the performance of SVQR ensemble with bagging.

• 한국방사선학회논문지
• /
• 제5권5호
• /
• pp.295-302
• /
• 2011

핵의학과에서 시행되는 일반 영상 검사는 수검자의 검사 접수로부터 의사의 판독까지의 과정 동안 오류가 발생된다. 이러한 오류는 최종단계인 의사 판독 시에 확인되어 재검사나 추가촬영, 결과의 재분석, 그리고 PACS 영상의 수정등의 내용을 영상실 검사 담당자에게 지시한다. 이러한 과정을 거쳐 얻어진 결과는 검사에서부터 판독까지의 시간 지연을 초래하고 또한 추가검사가 발생될 경우 환자 만족도와 병원의 신뢰도가 하락하게 된다. 따라서 영상 검사의 접수부터 결과 확정까지 발생되는 오류를 개선하여 수검자들의 불만 감소에 따른 환자 만족도 증가와 근무자들의 업무 효율 증가를 목적으로 한다. 2008년 3월부터 12월까지 9개월간 서울아산병원 핵의학과 일반 영상 검사를 하는 수검자의 검사 오류를 분석하여 2009년 1월부터 12월까지 12개월간 1차 개선 활동으로 검사 절차서의 재 확립 및 검사 업무기술서 작성, 2010년 1월부터 6월까지 6개월간 2차 개선 활동으로 Pre-filtering & Post-Filtering, 2010년 7월부터 10월까지 3개월간 3차 개선 활동 Cross-Check와 스티커 제작 및 부착 실시 이후 검사 오류 건수를 수집하여 비교하였다. 연도별 오류 건 수는 92건에서 1차, 2차 개선 후 32건, 3차 개선 후 46건으로 나타났고, 검사자에 의한 오류는 전체 오류원인의 94.6%이던 것이 74.3%로 감소되었다. 핵의학 일반 영상 검사는 다양한 검사의 종류와 서로 다른 전처치 및 결과산출, 영상의 구성, PACS 전송 영상의 차이로 인하여 검사자의 실수가 발생될 가능성이 높기 때문에 이를 줄이기 위한 개선 활동이 지속되어야 하며 각 영상실 담당자들의 지속적인 Cross-Check와 판독실의 Confirm 과정을 통하여 개인별 편차를 줄여나가야 할 것이다.

• 한국방사선학회논문지
• /
• 제5권4호
• /
• pp.217-221
• /
• 2011

$^{237}Np$ is very important material in the fission products of nuclear reactors. Resonance integral(RI) tests of this material is necessary to check between the experiments and the evaluated data. Such feedback to the evaluated data is very important to correct data and improve of codes. The RI for the $^{237}Np(n,{\gamma})^{238}Np$ reaction were measured by using the 46-MeV electron linear accelerator (linac) at the Research Reactor Institute, Kyoto University (KURRI). The measurement was performed in the energy region from 0.005 eV and 10 keV. RI obtained as 804.7 barns, compared with those of the evaluated data in JENDL-4.0 and Mughabghab.

• 동력기계공학회지
• /
• 제7권2호
• /
• pp.36-43
• /
• 2003

In this paper, the strain-gauge type accelerometer is developed. This type of accelerometer has simple structure and cost for manufacturing is cheap, compared with other types of accelerometer such as piezoelectric, capacitance and servo, etc. Also it is very sensitive to the low frequency vibration which is the prominent characteristics of the vibration occurring by vehicles moving across a bridge. Two prototype accelerometers are designed and manufactured based upon the FE(Finite Element) method and static and dynamic calibration tests are performed to check out the linearity, sensitivity and cross sensitivity, etc. Experimental results designate that the proposed accelerometer show reasonable performances compared to the commercial one.

• Journal of the Korean Data and Information Science Society
• /
• 제25권4호
• /
• pp.931-939
• /
• 2014

In this paper we propose the iteratively reweighted least squares procedure to solve the quadratic programming problem of support vector expectile regression with an asymmetrically weighted squares loss function. The proposed procedure enables us to select the appropriate hyperparameters easily by using the generalized cross validation function. Through numerical studies on the artificial and the real data sets we show the effectiveness of the proposed method on the estimation performances.

• 한국생산제조학회지
• /
• 제9권3호
• /
• pp.169-177
• /
• 2000

In machining screws which are important members in mono pumps or progressive cavity pumps CNC turning center with 3 axes is usually used. This sort of screw machining requires large amount of CL data points and rotational tools are used in machining. When working out the CL data points consideration of possible tool interference is important in order to avoid undercut. This paper describes the checking methods of tool interference in the screw machining on the CNC turning center. First of all a specific shape of a screw cross-section that could commonly be applied to all screws was chosen and then possible tool interference associated with that shape was identified. Checking method was mathematically developed and verified. This checking method will be utilized in the CAM system developed by the authors for screw machining on the 3-axis CNC turning center.

• Journal of Mechanical Science and Technology
• /
• 제19권spc1호
• /
• pp.473-480
• /
• 2005

A three axes marine satellite antenna has been developed. As a design step, a CAD model for the antenna has been created according to the design requirements. Kinematic analyses are carried out to insure design specification and to check collision detection of the CAD model. Marine satellite antennas experience base motions, and a relevant control system should control the three antenna axis to point to the satellites accurately. A sensor fusion algorithm and a PIDA (Proportional, Integral, Derivative, Acceleration) control algorithm are designed and implemented to control the yaw, level, and cross-level angle of a small size satellite marine antenna. Antenna stabilization control experiments are performed using a test simulator which gives the antenna base motions. Experimental results show small pointing errors, which is less than 0.2 degree for the level, cross-level, and yaw axis.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2005년도 동계학술발표대회 논문집
• /
• pp.186-192
• /
• 2005

A numerical study on the performance of a PEMFC was performed by using a CFD-ACE+commercial program. The effects of width, hight and shape of channel cross section and mass flow rate were investigated. In order to check the validity of the simulation, comparisons were carried out between predictions and experimental data available in the literature and shows the reasonable agreement. It is found that only the width of channel is strongly related to the performance of a PEMFC, while other factors have no marked effects.