• English Language & Literature Teaching
• /
• v.7 no.1
• /
• pp.35-48
• /
• 2001

One of the areas of second language acquisition that enjoyed popularity in recent years is interlanguage pragmatics. The main reason for this popularity lies in the critical role of pragmatic competence in appropriate use of a target language. The aim of this paper was to examine L2 learners' pragmatic behavior in their speech act performance and determine main sources causing pragmatic difficulty. Four major sources of pragmatic errors were identified: linguistic proficiency, L1 transfer, waffling and teaching activities. Each source was discussed with empirical evidence in some detail, and teaching suggestions were provided for developing learners' pragmatic competence in EFL classrooms.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2006.05a
• /
• pp.225-227
• /
• 2006

Active power factor correction methods for electronic ballast are reviewed in this paper. PFC technology becomes more important due to various wattage ratings of new light sources. Expecially, most popular two method critical conduction mode and average mode, are described. Each characteristics are compared in relation to application target and power rating.

• Proceedings of the PSK Conference
• /
• 2003.10b
• /
• pp.181.2-181.2
• /
• 2003

Inosine monophosphate dehydrogenase(IMPDH) catalyzes the $NAD^+$-dependent oxidation of IMP to XMP, the rate limiting step in the de novo biosynthesis of guanine nucleotide. Its critical role at the metabolic branch point in purine nucleotide biosynthesis makes it a useful target in the development of drugs for antiviral and anticancer chemotherapy and in immunosupressant area. Several compound with antiviral activity have been found to be inhibitors of IMPDH. For example, ribavirin, a competitive inhibitor of IMPDH, has broad spectrum antiviral activities against DNA and RNA viruses. (omitted)

• Journal of the Korea Convergence Society
• /
• v.10 no.12
• /
• pp.151-158
• /
• 2019

This study was conducted to identify the level of problem-solving ability, critical thinking and satisfaction level of students majoring in dental hygiene, and to identify the impact of problem-solving ability and critical thinking on major satisfaction levels. The research target collected data through a structured questionnaire for 259 students majoring in dental hygienics located in North and South Gyeongsang Province. The analysis results showed that the problem-solving ability of the study subjects was 2.56, critical accidents were 2.58, and the major satisfaction level was 2.32, and the problem-solving ability, critical thinking and major satisfaction level were positively correlated with each other. Among the lower factors of problem solving ability, solution performance and solution model were significant factors that could improve major satisfaction, and among the lower factors of critical thinking, intellectual fairness, intellectual passion/interest, and systematicness were significant factors that could improve major satisfaction. Critical thinking also significantly mediated problem solving ability and major satisfaction level (β=).2602, BCCI [.0908~.4529]). Based on the results, it is believed that dental hygiene education needs to be developed in addition to the establishment of an educational environment that can enhance the ability to solve problems and critical thinking, and that research should be continued to check its effects.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.37 no.5
• /
• pp.94-104
• /
• 2000

The accuracy and reliability of the target tracking is very critical issue in the design of automotive collision warning radar A significant problem in multi-target tracking (MTT) is the target-to-measurement data association If an incorrect measurement is associated with a target, the target could diverge the track and be prematurely terminated or cause other targets to also diverge the track. Most methods for target-to-measurement data association tend to coalesce neighboring targets Therefore, many algorithms have been developed to solve this data association problem. In this paper, a new multi-target data association method based on order statistics is described The new approaches. called the order statistics probabilistic data association (OSPDA) and the order statistics joint probabilistic data association (OSJPDA), are formulated using the association probabilities of the probabilistic data association (PDA) and the joint probabilistic data association (JPDA) filters, respectively Using the decision logic. an optimal or near optimal target-to-measurement data association is made A computer simulation of the proposed method in a heavy cluttered condition is given, including a comparison With the nearest-neighbor CNN). the PDA, and the JPDA filters, Simulation results show that the performances of the OSPDA filter and the OSJPDA filter are superior to those of the PDA filter and the JPDA filter in terms of tracking accuracy about 18% and 19%, respectively In addition, the proposed method is implemented using a developed digital signal processing (DSP) board which can be interfaced with the engine control unit (ECU) of car engine and with the d?xer through the controller area network (CAN)

• Progress in Medical Physics
• /
• v.34 no.4
• /
• pp.41-47
• /
• 2023

Purpose: This study aimed to dosimetrically compare the technique of three-dimensional conformal radiotherapy (3D CRT), which is a traditional prophylactic cranial irradiation method, and the intensity-modulated radiotherapy (IMRT) and volumetric modulated arc therapy (VMAT) techniques used in the last few decades with the dynamic conformal arc therapy (DCAT) technique. Methods: The 3D CRT, VMAT, IMRT, and DCAT plans were prepared with 25 Gy in 10 fractions in a Monaco planning system. The target volume and the critical organ doses were compared. A comparison of the body V₂, V₅, and V₁₀ doses, monitor unit (MU), and beam on-time values was also performed. Results: In planned target volume of the brain (PTV_Brain), the highest D99 dose value (P<0.001) and the most homogeneous (P=0.049) dose distribution according to the heterogeneity index were obtained using the VMAT technique. In contrast, the lowest values were obtained using the 3D CRT technique in the body V₂, V₅, and V₁₀ doses. The MU values were the lowest when DCAT (P=0.001) was used. These values were 0.34% (P=0.256) lower with the 3D CRT technique, 66% (P=0.001) lower with IMRT, and 72% (P=0.001) lower with VMAT. The beam on-time values were the lowest with the 3D CRT planning (P<0.001), 3.8% (P=0.008) lower than DCAT, 65% (P=0.001) lower than VMAT planning, and 76% (P=0.001) lower than IMRT planning. Conclusions: Without sacrificing the homogeneous dose distribution and the critical organ doses in IMRTs, three to four times less treatment time, less low-dose volume, less leakage radiation, and less radiation scattering could be achieved when the DCAT technique is used similar to conventional methods. In short, DCAT, which is applicable in small target volumes, can also be successfully planned in large target volumes, such as the whole-brain.

• Journal of the Korea Concrete Institute
• /
• v.21 no.6
• /
• pp.681-688
• /
• 2009

The railroad bridges have been usually experienced by vibration and impact in service state. With this reason, it is important that the effective strengthening capacity should be considered to resist the kind of service loading. In this study, NSM strengthening technique is recommended for the concrete railroad bridge because of its better effective resistance for dynamic loading condition and strengthening cost than the conventional externally bonded strengthening using fiber sheet. However, to widely apply NSM method for the concrete railroad bridge, it needs that the strengthening ratio has to be reasonably evaluated with geometrical and material uncertainties, especially for the concrete bridge under long-term service state without the apparent design history and detail information such as concrete compressive strength, reinforcing ratio, railroad characteristics. The purpose of this study is to propose the critical strengthening ratio of CFRP plate for the targeted concrete railroad bridge with uncertainties of deterioration of the structures. To do this, Monte Carlo Simulation (MCS) for geometrical and material uncertainties have been applied so that this approach may bring the reasonable strengthening ratio of CFRP plate considering probabilistic uncertainties for the targeted concrete railroad bridge. Finally, the critical strengthening ratio of NSM strengthened by CFRP plate is calculated by using the limit state function based on the target reliability index of 3.5.

• Quality Improvement in Health Care
• /
• v.7 no.1
• /
• pp.32-45
• /
• 2000

Background : Critical pathway is an optional sequencing and timing of interventions by physicians, nurses, and other staff for a particular diagnosis or procedure, designed to minimize delays and resource utilization, and to maximize quality of care; abbreviated versions of case management plans that show critical outcome and key incidents that occur in a predictable and timely fashion to achieve an appropriate length of stay. This study is to develop a critical pathway for vaginal delivery and cesarean section to assess the degree of contentment of the patients and medical personnel and to implement clinical application to see how we could meet the need to guide patients to achieve continuum of care. Method : Critical pathways were developed for normal vaginal delivery and casarean section. LOS(length of stay) target for vaginal delivery was 1 day after delivery & 5 days after C-section. It was distributed to the mother at the OPD and explained thoroughly. It was applied when patients got into the Labor & Delivery Floor. We applied total of 42 patients (30 normal deliveries & 12 C-sections) from February to March, 2000. We performed patient satisfaction survey to all 42 patients, 24 nurses, and 7 residents for internal customer satisfaction. Results : Twenty six patients out of 42 responded to the survey. Twenty one patients out of 26 answered satisfactory. Eighty four percent of 21 respondents replied Critical pathway worked very well. Treatment column got the most compliance. Eleven out of 31 employees thought critical pathway is very helpful for the patient care. Eighteen people didn't see any difference. In their opinion, treatment got the least compliance, which is the contrary to patients opinion. Fifty eight percent of respondents thought that critical pathway can expedite early discharge. Conclusion : Patient satisfaction was higher than we expected but we still need to revise the form. It is recommended to analyze the cost and variance check in the future.

• The Korean Journal of Physiology and Pharmacology
• /
• v.27 no.5
• /
• pp.457-470
• /
• 2023

The aim of this study was to investigate the role of kinesin superfamily member 15 (KIF15) in nasopharyngeal carcinogenesis (NPC) and explore its underlying mechanisms. We employed various assays, including the CCK-8 assay, flow cytometry, the Transwell and scratch assay, Western blotting, and nude mice transplantation tumor, to investigate the impact of KIF15 on NPC. Our findings demonstrate that KIF15 plays a critical role in the proliferation, apoptosis, migration, and invasion of NPC cells. Furthermore, we discovered that silencing KIF15 inhibits cell proliferation, migration, and invasion while promoting apoptosis, and that KIF15's effect on NPC cell growth is mediated through the PI3K/AKT and P53 signaling pathways. Additionally, we showed that KIF15 promotes nasopharyngeal cancer cell growth in vivo. Our study sheds light on the significance of KIF15 in NPC by revealing that KIF15 knockdown inhibits NPC cell growth through the regulation of AKT-related signaling pathways. These findings suggest that KIF15 represents a promising therapeutic target for the prevention and treatment of NPC.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.39 no.1
• /
• pp.130-139
• /
• 2016

The purpose of this paper is to analyze the problems and the sources of defective products and draw improvement plans in a small plastic boat manufacturing process using TOC (Theory Of Constraints) and statistical analysis. TOC is a methodology to present a scheme for optimization of production process by finding the CCR (Capacity Constraints Resource) in the organization or the all production process through the concentration improvement activity. In this paper, we found and reformed constraints and bottlenecks in plastic boat manufacturing process in the target company for less defect ratio and production cost by applying DBR (Drum, Buffer, Rope) scheduling. And we set the threshold values for the critical process variables using statistical analysis. The result can be summarized as follows. First, CCRs in inventory control, material mix, and oven setting were found and solutions were suggested by applying DBR method. Second, the logical thinking process was utilized to find core conflict factors and draw solutions. Third, to specify the solution plan, experiment data were statistically analyzed. Data were collected from the daily journal addressing the details of 96 products such as temperature, humidity, duration and temperature of heating process, rotation speed, duration time of cooling, and the temperature of removal process. Basic statistics and logistic regression analysis were conducted with the defection as the dependent variable. Finally, critical values for major processes were proposed based on the analysis. This paper has a practical importance in contribution to the quality level of the target company through theoretical approach, TOC, and statistical analysis. However, limited number of data might depreciate the significance of the analysis and therefore it will be interesting further research direction to specify the significant manufacturing conditions across different products and processes.