• Journal of Welding and Joining
• /
• 제13권2호
• /
• pp.115-121
• /
• 1995

As the metal transfer in the GMAW process affects the weld quality and productivity, the mechanism of molten formation and detachment has been investigated at various welding conditions. The force balance and pinch instability models have been widely used to analyze the metal transfer in the globular and spray modes, respectively A new approach is proposed in this work by minimizing the energy of molten drop system. Effects of the surface tension, gravity, electromagnetic and drag forces are considered with no presumed molten drop geometry. Effects of various welding conditions on the metal transfer are explained. The results show that the proposed mode can be applied to the globular and spray transfer modes. When compared with other models, results of the proposed model show better agreements with the available experimental data, which demonstrates the validity of the present model.

• Journal of Microbiology and Biotechnology
• /
• 제8권6호
• /
• pp.645-649
• /
• 1998

A glycolipid type of biosurfactants was obtained from a strain which had been isolated from soil. The cell was identified as Pseudomonas aeruginosa from taxonomic characteristics and was designated as YPJ80. Thin layer chromatography and deoxyhexose detection tests were done to verify the type of biosurfactant. Critical micelle concentration (CMC) of the surfactant was observed to be 50 ppm and the minimum surface tension was 30.1 mN/m. As an emulsifier, YPJ80 biosurfactant was superior to emulsan in the emulsification of crude Arabian light oil.

• 대한의용생체공학회:의공학회지
• /
• 제8권2호
• /
• pp.199-204
• /
• 1987

ABA type block copolymers composed of r benzyle L-glutamate as the A component and poly(ethylene glycol) as the B components were obtained. Platelet adhesion on their sunfaces was investigated by a column elusion method to examine the effects of microdomain and secondary structure. The number of platelets adhered from whole blood and plasma rich platelet was smaller for the block copolymer systems than for the homopolymers. In the block copolymer system, the number of platelets adrered on their surfaces increased with increasing the content of PEG, that is, with decreasing of a-helix of block copolymers. A thick thrombus formation on the PBLG homopolymer was observed than block copolymer by scanning electron micrographs. The platelets adhesion increased with increasing the critical surface tension of the block copolymer.

• 한국응용과학기술학회지
• /
• 제6권2호
• /
• pp.53-58
• /
• 1989

A series of four sodium ${\alpha}-sulfo$ fatty acid allylester oligomers such as sodium ${\alpha}-sulfo$ lauric acid allylester oligomer, sodium ${\alpha}-sulfo$ myristic acid allyl ester oligomer, sodium ${\alpha}-sulfo$ palmitic acid allyl ester oligomer and sodum ${\alpha}-sulfo$ stearic acid allyl ester oligomer were examined for surface tension, defloculation effect and emulsifying power. Also critical micelle concentration (cmc) was evaluated. Consequently, these sodium allyl ${\alpha}-sulfo$ aliphatic carboxylate aligomers show o/w type emulsifying agent and dispersion effect in 1g/100ml soulution.

• 한국지반공학회지:지반
• /
• 제7권2호
• /
• pp.5-26
• /
• 1991

지반의 상대밀도, 응력이력, 말뚝의 표면상태, 매설깊이 및 직경이 상양력을 받는 말뚝의 거동에 미치는 영향에 대한 모형실험결과가 발표되었다. 극한상양지지력은 모래의 상대밀도 뿐만아니라 현위치수평응력에 의존되며, 한계깊이 현상은 깊이에 따른 수평응력의 변화로 설명되고, Ktan 의 값은 말뚝직경의 증가함에 따라 감소하는 경향을 보인다.

• 대한기계학회논문집
• /
• 제18권6호
• /
• pp.1520-1534
• /
• 1994

A new analytical method for the prediction of the buckling behavior of laminated plates consisting of layers having different properties in tension and compression, so called bimodulus, is proposed in this paper. Buckling analysis of bimodular composite laminated paltes are performed with the results reduced from plate bending analysis. The governing equations of bimodular plates are based on the first shear deformation theory. As a case study, bending and buckling of simply supported, multilayered, symmetric, antisymmtric, and specially orthotropic laminates under uniformly distributed lateral load for bending analysis and in-plane load for buckling are considered. The results of the bending analysis are compared with the previous papers. Then, the fundamental critical buckling loads and buckling modes are calculated for the various bimodular composite rectangular thin plates.

• Journal of Microbiology and Biotechnology
• /
• 제15권1호
• /
• pp.55-58
• /
• 2005

Sophorolipid was produced by Candida bombicola ATCC 22214 from soybean dark oil, a byproduct of soybean oil processing. With a fed-batch culture of C. bombicola for 7 days, 90 g/l of sophorolipid was obtained. The CMC (critical micelle concentration) and minimum surface tension of the sophorolipid in aqueous solution were found to be 150 mg/l and 48 mN/m, respectively. The dispersion capability of sophorolipid was higher than that of the chemical surfactants such as SDS and Brij30. The molar solubility ratio (MSR) of 4-methylnaphthalene was 0.2. Linoleic and oleic acids were the main constituents of the fatty acid composition of the sophorolipid. The sophorolipid showed antimicrobial activity against Propionibacterium acne and Bacillus subtilis.

• 한국레이저가공학회:학술대회논문집
• /
• 한국레이저가공학회 2001년도 추계학술발표대회 논문개요집
• /
• pp.43-47
• /
• 2001

This paper presents a study of the uniform metal droplet generation using laser. The theoretical model, based on the variational principle instead of solving the Wavier-Stokes equation with moving boundaries, is developed. Our model is considered the Young-Laplace equation and force equilibrium conditions. Surface tension coefficient is determined under the statical condition with induced differential equation by using experimental result. In case of dynamic vibration, metal droplet shape and critical detaching volume are predicted by recalculating of proposed model. The simulation result revealed that the developed model could reasonably describe the molten metal droplet behavior on vibration with metal wire.

• 한국세라믹학회지
• /
• 제43권4호
• /
• pp.203-206
• /
• 2006

Polyacrylonitrile (PAN) nanofibers, which are pH-sensitive and exhibit soft actuation as a linear actuator and artificial muscles, were prepared by electrospinning to investigate the effect of viscosity on the morphology of PAN fibers. Experimental results revealed that higher viscosity is critical for the formation of unbeaded nanofibers because surface tension is almost constant throughout the experiment. Uniform, smooth, and continuous fibers with diameters of about 700 nm were achieved for the 10 wt% PAN fibers at a flow rate of 0.5 mL/h and an electric field of 0.875 kV/cm.

• 대한화장품학회지
• /
• 제10권1호
• /
• pp.42-48
• /
• 1984

The comparative detergency of Sodium dodecyl sulfate (SDS) solution near the first critical micelle concentration (CMC) was measured by means of a 131 I-labelled castor oil as a soil. More than 95% radiochemical purity of 131 I-labelled castor oil was obtained using potassium lidide as a carrier. Polyester test fabric was soiled with 131 I-labelled castor oil, and washed in a conventional washing apparatus mounted on appropriate devices. Fabric radioactivities were measured before and after washing by a scintilation counter. Near the first CMC, the detergency of SDS was increased with decreasing of surface tension of SDS. It was also shown that 131 I-labelled castor oil was useful for studying the detergency of SDS.