• 센서학회지
• /
• 제9권1호
• /
• pp.1-8
• /
• 2000

최근, 자동차가 점점 고급화 되어감에 따라 자동차엔진과 같이 $200^{\circ}C$ 이상의 고온과 부식적인 환경 하에 사용되어 질 수 있는 고성능의 실리콘 가속도센서의 장착이 기대되고 있다. 그러나 실리콘은 본질적으로 온도의 영향이 큰 물질이고, p-n 접합으로 압저항이 형성되기 때문에 $150^{\circ}C$ 이상이 되면 누설전류가 급격하게 증가하여 센서의 성능을 떨어뜨린다. 본 연구에서는 SOI 구조를 이용한 가속도센서의 온도특성을 해석하고, 유한요소법(finite element method)을 이용하여 감도 온도계수(TCS) 및 오프셋전압 온도계수(TCO)의 열잔류응력과의 관련성을 검토하였다. 그 결과, TCS는 압저항의 불순물 농도를 최적화함으로써 줄일 수 있고, TCO는 압저항의 열잔류응력과 불균일한 공정에 관계가 있다는 것을 알았다. 그리고 센서의 중앙지지구조에 있어서 패키징 열잔류응력의 평균값은 약 $3.7{\times}10^4Nm^{-2}^{\circ}C^{-1}$ 정도로 주변지지구조보다 1/10정도 작게 나타났다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.157-157
• /
• 2010

Vertical-structure light-emitting diodes (V-LEDs) by laser lift-off (LLO) have been exploited for high-efficiency GaN-based LEDs of solid-state lightings. In V-LEDs, emitted light from active regions is reflected-up from reflective ohmic contacts on p-GaN. Therefore, silver (Ag) is very suitable for reflective contacts due to its high reflectance (>95%) and surface plasmon coupling to visible light emissions. In addition, low contact resistivity has been obtained from Ag-based ohmic contacts annealed in oxygen ambient. However, annealing in oxygen ambient causes Ag to be oxidized and/or agglomerated, leading to degradation in both electrical and optical properties. Therefore, preventing Ag from oxidation and/or agglomeration is a key aspect for high-performance V-LEDs. In this work, we demonstrate the enhanced thermal stability of Ag-based Ohmic contact to p-GaN by reducing the thermal compressive stress. The thermal compressive stress due to the large difference in CTE between GaN ($5.6{\times}10^{-6}/^{\circ}C$) and Ag ($18.9{\times}10^{-6}/^{\circ}C$) accelerate the diffusion of Ag atoms, leading to Ag agglomeration. Therefore, by increasing the additional residual tensile stress in Ag film, the thermal compressive stress could be reduced, resulting in the enhancement of Ag agglomeration resistance. We employ the thin Ni layer in Ag film to form Ni/Ag mutli-layer structure, because the lattice constant of NiO ($4.176\;{\AA}$ is larger than that of Ag ($4.086\;{\AA}$). High-resolution symmetric and asymmetric X-ray diffraction was used to measure the in-plane strain of Ag films. Due to the expansion of lattice constant by oxidation of Ni into NiO layer, Ag layer in Ni/Ag multi-layer structure was tensilely strained after annealing. Based on experimental results, it could be concluded that the reduction of thermal compressive stress by additional tensile stress in Ag film plays a critical role to enhance the thermal stability of Ag-based Ohmic contact to p-GaN.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.377-382
• /
• 2001

Mechanical behavior and electrical resistance change of CPDP (carbon particle dispersed plastic) composite consisting of epoxy resin and conductive carbon particle were investigated under monotonic loading and repeated loading-unloading. The electrical resistance almost linearly increased with increasing strain during loading and the residual electrical resistance was observed even after removing load. The value of the residual electrical resistance was dependent on the maximum strain under the applied stress. This result suggests that the estimation of maximum strain (i.e., damage) is possible by the measuring electrical resistance of composite. The behavior of electrical resistance change during and after loading was discussed on the basis of the results of microscopic deformation and fracture observation. Moreover, the relationship between the volume fraction of carbon particle and the electrical resistivity of CPDP was investigated in relation to the percolation theory. Simulation model of percolation structure was established by Monte Carlo method and the simulation result was compared to the experimental results. The electrical resistance change under applied loading was analyzed quantitatively using the percolation equation and a simple model for the critical volume fraction of carbon particle as a function of the mechanical stress. It was revealed that the prediction was in good agreement with the experimental result except in the region near the failure of material.

• 한국초전도ㆍ저온공학회논문지
• /
• 제7권2호
• /
• pp.11-15
• /
• 2005

The I$_{c}$ degradation behavior of Bi-2223 tapes bent at RT and 77K were investigated using the bending device invented by Goldacker. Test results on fixing the tape at RT and 17K showed no difference. At 17K and RT bending, the critical strain was 0.67 and 0.50$\%$, respectively, for the VAM-l tape. For the AMSC tape, it was 0.94 and 0.88$\%$, respectively. These results show that there is additional residual stress in the superconducting filaments to be bent at 17K which shifts the formation of cracks into smaller bending radii. This was proved by computational analysis based on the mixture rule of composites. For the VAM-l tape, the Ie degradation behavior using the Goldacker type device shifted to higher strain levels at about 0.5$\%$, as compared with the FRP sample holders which have a critical bending strain of about 0.24$\%$. Also, for the externally reinforced AMSC tape, Ie degradation using the Goldacker type device begins at a higher strain level, at 0.88$\%$ as compared with using FRP sample holders, at 0.74$\%$. The difference between both cases can be explained by the tensile' and thermal stresses that the tapes were subjected to during fixing (soldering) when the FRP sample holders were used.

• Advances in concrete construction
• /
• 제15권3호
• /
• pp.171-178
• /
• 2023

Cytoskeleton components play key role in maintaining cell structure and in giving shape to the cell. These components include microtubules, microfilaments and intermediate filaments. Among these filaments intermediate filaments are the most rigid and bear large compressive force. Actually, these filaments are surrounded by other filaments like microtubules and microfilaments. This network of filaments makes a layer as a surface on intermediate filaments that have great impact on buckling behavior of intermediate filaments. In the present article, buckling behavior of intermediate filaments is studied by taking into account the effects of surface by using Euler Bernoulli and Timoshenko beam theories. It is found that effects of surface greatly affect the critical buckling force of intermediate filaments. Further, it is observed that the critical buckling force is inversely proportional to the length of filament. Such types of observations are helpful for further analysis of nanofibrous in their actual environments within the cell.

• 한국철도학회논문집
• /
• 제20권1호
• /
• pp.64-75
• /
• 2017

철도궤도 상부 흙노반은 궤광으로부터 전달된 열차하중을 지지하고 분산하는 기능을 갖는다. 성토체의 일반적인 흙노반은 흙재료를 다짐하여 조성하며 차량 반복하중에 의해 공용중 잔류침하가 발생하는 데 일정부분 기여한다. 흙노반의 잔류침하는 회복불가능한 영구변형이어서 궤도틀림 등 궤도 안전성을 크게 저하시킨다. 그럼에도 불구하고 현재까지 흙노반재료에 대한 역학적 시험을 바탕으로 합리적인 잔류침하 관리기준이 제시된 바 없다. 반면에 흙노반의 현장관리 및 판정기준은 강성평가 또는 현장들밀도시험에 의해서만 이루어지고 있어 불합리하다. 본 연구에서는 흙노반이 경험하는 전단응력비(${\tau}/{\tau}_f$)와 구속압(${\sigma}_3$)을 수치해석을 통해 구하고 이를 반영한 실내 흙노반 영구변형시험방법을 제시하였다. 제시된 시험방법을 이용하여 대표적인 철도건설현장 흙노반 재료로 만든 다짐시편에 대하여 반복삼축시험을 실시하였으며 이로부터 향후 잔류침하의 추정에 활용할 수 있는 기본 영구변형예측모델 모델계수를 구속압 및 전단응력비 수준별로 제시할 수 있었다.

• 대한기계학회논문집
• /
• 제7권4호
• /
• pp.404-409
• /
• 1983

The warping of unsymmetric laminated composites is induced by residual curing stress at the room temperature. Classical lamination theory (C.L.T.) predicts the room temperature shapes of all unsymmetric laminates to be a saddle. Experimental observations, however, indicate some unsymmetric laminated composites have cylindrical room temperature shapes. This anomalous behavior is explained by the extention of C.L.T. which involves Von Karman's large deflection theory. It is shown that, depending on the thickness, width, length, curing temperature and room temperature of the laminate, critical boundaries of the shape change are determined. Theoretical predictions are compared with experimental results of Toray Graphite/Epoxy {O$_{n}$/90$_{n}$}$_{T}$./....

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.714-719
• /
• 2004

Railway wheels and axles belong to the most critical components in railway vehicles. The service conditions of railway vehicles became more severe in recent years due to the increase of speed. Therefore, a more precise evaluation of wheel/set life and safety has been requested. One of the major reasons of railway wheel damage is a contact zone failure by wheel/rail contact. In this paper, we conducted a rolling contact fatigue test for wheels using a specimen of wheel/rail. the behavior of hardeness and residual stress below the contact surface of the test pieces in the fatigue process were analyzed. Finally, the relation between fatigue life and contact pressure was obtained.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 1999년도 제1회 학술대회논문집(KIASC 1st conference 99)
• /
• pp.30-33
• /
• 1999

In this study, the fatigue test at room temperature and residual resistivity measurement test at 12K were carried out, respectively, using a 9 strand Cu-Ni/NbTi/Cu composite cable, in order to investigate how the fatigue damage effects on critical properties. Through the fatigue test of a 9 strand Cu-Ni/NbTi/Cu composite cable, a conventional S-N curve was obtained even though there existed a possibility of fretting among strands. From the resistivity measurement of a NbTi strand after fatigue tests, it was found that with increase of the repeated number the RRR increased slightly, and the trend became significant with increase in maximum value of the applied stress amplitude.

• 한국생산제조학회지
• /
• 제23권6호
• /
• pp.576-579
• /
• 2014

Rails are continuously exposed to severe environments due to increases in train service frequency, passing tonnage, and speed. Wear is one of the most common types of damage observed on rails. The surface of railsis heat treated to secure safety at critical sites, such as curved tracks or turnouts. Ultrasonic nanocrystal surface modification (UNSM), a new approach for rails, was examined to strengthen the rail surface. The effect of UNSM on the wear resistance of rail specimens was compared with that of heat treatment. Wear resistance was improved after UNSM treatment due to increased hardness and surface compressive residual stress.