• Molecules and Cells
• /
• v.43 no.4
• /
• pp.331-339
• /
• 2020

Genetic modifications in noncoding regulatory regions are likely critical to human evolution. Human-accelerated noncoding elements are highly conserved noncoding regions among vertebrates but have large differences across humans, which implies human-specific regulatory potential. In this study, we found that human-accelerated noncoding elements were frequently coupled with DNase I hypersensitive sites (DHSs), together with monomethylated and trimethylated histone H3 lysine 4, which are active regulatory markers. This coupling was particularly pronounced in fetal brains relative to adult brains, non-brain fetal tissues, and embryonic stem cells. However, fetal brain DHSs were also specifically enriched in deeply conserved sequences, implying coexistence of universal maintenance and human-specific fitness in human brain development. We assessed whether this coexisting pattern was a general one by quantitatively measuring evolutionary rates of DHSs. As a result, fetal brain DHSs showed a mixed but distinct signature of regional conservation and outlier point acceleration as compared to other DHSs. This finding suggests that brain developmental sequences are selectively constrained in general, whereas specific nucleotides are under positive selection or constraint relaxation simultaneously. Hence, we hypothesize that human- or primate-specific changes to universally conserved regulatory codes of brain development may drive the accelerated, and most likely adaptive, evolution of the regulatory network of the human brain.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.5
• /
• pp.668-676
• /
• 2003

The effect of nozzle height on heat transfer of a hot steel plate cooled by an impinging liquid jet is not well understood. Previous studies have been based on the dimensionless parameter z/d. To test the validity of this dimensionless parameter and to investigate gravitational effects on the jet, stagnation velocity of an impinging liquid jet were measured and the cooling experiments of a hot steel plate were conducted for z/d from 6.7 to 75, and an inverse heat conduction method is applied for the quantitative comparison. Also, the critical instability point of a liquid jet was examined over a range of flow rates. The experimental velocity data for the liquid jet were well correlated with the dimensionless number 1/F $r_{z}$$^2$based on distance. It was thought that the z/d parameter was not valid for heat transfer to an impinging liquid jet under gravitational forces. In the cooling experiments, heat transfer was independent of z when 1/F $r_{z}$$^2$< 0.187(z/d = 6.7). However, it was found that the heat transfer quantity for 1/F $r_{z}$$^2$=0.523(z/d = 70) is larger 11% than that in the region for 1/F $r_{z}$$^2$=0.187. The discrepancy between these results and previous research is likely due to the instability of liquid jet.uid jet.

• Journal of Advanced Marine Engineering and Technology
• /
• v.10 no.2
• /
• pp.156-164
• /
• 1986

In the case of boiling on high temperature wall, vapor film covers fully or parcially the surface. This phenomenon, film boiling or transition boiling, is very important in the surface heat treatment of metal, design of cryogenic heat exchanger and emergency cooling of nuclear reactor. Mainly supposed hydraulic-thermal accidents in nuclear reactor are LCCA (Loss of Coolant Accident) and PCM (Power-Cooling Mismatch). Recently, world-wide studies on reflooding of high temperature rod bundles after the occurrence of the above accidents focus attention on wall temperature history and required time in transient cooling process, wall superheat at rewet point, heat flux-wall superheat relationship beyond the transition boiling region, and two-phase flow state near the surface. It is considered that the further systematical study in this field will be in need in spite of the previous results in ref. (2), (3), (4). The paper is the study about the fast transient cooling process following the wall temperature excursion under the CHF (Critical Heat Flux) condition in a forced convective subcooled boiling system. The test section is a vertically arranged concentric annulus of 800 mm long and 10 mm hydraulic diameter. The inner tube, SUS 304 of 400 mm long, 8 mm I.D, and 7 mm O.D., is heated uniformly by the low voltage AC power. The wall temperature measurements were performed at the axial distance from the inlet of the heating tube, z=390 mm. 6 chromel- alumel thermocouples of 76 .mu.m were press fitted to the inner surface of the heating tube periphery. To investigate the heat transfer characteristics during the fast transient cooling process, the outer surface (fluid side) temperature and the surface heat flux are computed from the measured inner surface temperature history by means of a numerical method for inverse problems of transient heat conduction. Present cooling (boiling) curve is sufficiently compared with the previous results.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.24 no.5
• /
• pp.553-560
• /
• 2015

Fracture mechanics analysis for cracked pipes is essential for applying the leak-before-break (LBB) concept to nuclear piping design. For LBB assessment, crack instability and leak rate should be predicted accurately for through-wall cracked pipes. In a nuclear piping system, elbows are connected with straight pipes by circumferential welding; this weld region is often considered a critical location. Hence, accurate crack assessment is necessary for cracks in the interface between elbows and straight pipes. In this study, the stress intensity factor (SIF) and elastic crack opening displacement (COD) were estimated through detailed 3D elastic finite element (FE) analyses. Based on the results, closed-form solutions of shape factors for calculating the SIFs and elastic CODs were proposed for circumferential through-wall cracks in the abovementioned interfaces under internal pressure. In addition, the effect of the elbow on shape factors was investigated by comparing the results with the existing solutions for a straight pipe.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.13 no.6
• /
• pp.451-462
• /
• 2011

The smoke control system plays the most important role in securing evacuation environment when a fire occurs in road tunnels. Smoke control methods in road tunnels are classified into two categories which are longitudinal ventilation system and transverse ventilation system. In this study it is intended to review the characteristics of smoke behavior by performing numerical analysis for calculating the optimal smoke exhaust air volume with scaled-model and simulation when a fire occurs in tunnels in which transverse ventilation is applied, and for obtaining the basic data required for the design of smoke exhaust systems by deriving optimal smoke exhaust operational conditions for various conditions. As a result of this study, when the critical velocity in the tunnel is 1.75 m/s and 2.5 m/s, the optimal smoke exhaust air volume has to be more than $173m^3/s$, $236m^3/s$ for the distance of the smoke moving which can limit the distance to 250 m. In addition, in case of uniform exhaust the generated smoke is effectively taken away if the two exhaust holes near the fire region are opened at the same time.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.11
• /
• pp.6961-6964
• /
• 2013

Human papillomavirus (HPV) is a major cause of cervical cancer. More than 100 HPV genotypes have been identified; however the distribution varies geographically and according to ethnicity. The purpose of this study was to investigate the prevalence and distribution of HPV subtypes among Northeast Thai women. Subjects included 198 cases of SCCA and 198 age-matched, healthy controls. HPV-DNA was amplified by PCR using the consensus primers GP5+/6+ system followed by reverse line blot hybridization genotyping. The prevalence of high-risk HPV infection was 21 (10.1%) and 152 (76.8%) in the controls and in the cases, respectively. High-risk HPV significantly increased the risk for cervical cancer with an OR of 42.4 (95%CI: 22.4-81.4, p<0.001) and an adjusted OR of 40.7-fold (95%CI: 21.5-76.8, p <0.001). HPV-16 was the most prevalent HPV type in the SCCA (56.2%) followed by HPV-58 (17.8%) and HPV-18 (13.6%); whereas HPV-58 (46.4%) was a prominent genotype in the controls followed by HPV-16 (39.3%) and unidentified HPV types (25.0%). These findings indicate that HPV infection remains a critical risk factor for SCCA; particularly, HPV-16, HPV-58 and HPV-18. In order to eradicate cervical cancer, sustained health education, promoted use of prophylactics and a HPV-58 vaccine should be introduced in this region.

• Journal of the Korean Chemical Society
• /
• v.47 no.3
• /
• pp.257-264
• /
• 2003

This study has investigated the temperature-sensitive liposomes, which release anticancer drug(doxorubicin) at the hyperthermia temperature$(~40^{\circ}C)$. The temperature-sensitive liposomes were modified with a copolymers of N-isopropylacrylamide(NIPAAm) and acrylamide(AAm), which exhibit a lower critical solution temperature (LCST) at the hyperthermia temperature. The release of doxorubicin from the modified liposomes was determined by measuring the fluorescence intensity with changing temperature and time. The release of doxorubicin from liposomes modified with poly(NIPAAm-co-AAm) copolymer was increased significantly, because poly(NIPAAm-co-AAm) could undergo the conformational transition in the narrow hyperthermia temperature region$(~40{\pm}2^{\circ}C)$. Moreover, we observed that doxorubicin released from liposomes within 5 minutes, and the size of modified liposomes was 120~170 nm. In this study, we have prepared temperature-sensitive liposomes which could be controlled by temperature. They can be applied in the field of a drug delivery system for tumor targeting by temperature control.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.8
• /
• pp.2403-2409
• /
• 2014

Absolute isotope ratio is a critical constituent in determination of atomic weight. To measure the absolute isotope ratio using a mass spectrometer, mass discrimination factor, $f_{MD}$, is needed to convert measured isotope ratio to real isotope ratio of gas molecules. If the $f_{MD}$ could be predicted, absolute isotope ratio of a chemical species would be measureable in absence of its enriched isotope pure materials or isotope references. This work employed gravimetrically prepared isotope mixtures of argon (Ar) to obtain $f_{MD}$ at m/z of 40 in the magnetic sector type gas mass spectrometer (gas/MS). Besides, we compare the nitrogen isotope ratio of nitrogen trifluoride ($NF_3$) with that of nitrogen molecule ($N_2$) decomposed from the same $NF_3$ thermally in order to identify the difference of $f_{MD}$ values in extensive m/z region from 28 to 71. Our result shows that $f_{MD}$ at m/z 40 was $-0.044%{\pm}0.017%$ (k = 1) from measurement of Ar artificial isotope mixtures. The $f_{MD}$ difference in the range of m/z from 28 to 71 is observed $-0.12%{\pm}0.14%$ from $NF_3$ and $N_2$. From combination of this work and reported $f_{MD}$ values by another team, IRMM, if $f_{MD}$ of $-0.16%{\pm}0.14%$ is applied to isotope ratio measurement from $N_2$ to $SF_6$, we can determine absolute isotope ratio within relative uncertainty of 0.2 %.

• Journal of the Society of Naval Architects of Korea
• /
• v.57 no.2
• /
• pp.80-87
• /
• 2020

As the Arctic sea ice decreases due to various reasons such as global warming, the demand for ships and offshore structures operating in the Arctic region is steadily increasing. In the case of sea ice, the anisotropy is caused by the uncertainty inside the material. For most of the research, nevertheless, estimating the ice load has been treated deterministically. With regard to this, in this paper, a four-point bending strength analysis of an ice specimen was attempted using a stochastic finite element method. First, spatial distribution of the material properties used in the yield criterion was assumed to be a multivariate Gaussian random field. After that, a direct method, which is a sort of stochastic finite element method, and a sensitivity method using the sensitivity of response for random variables were proposed for calculating the probabilistic distribution of ice specimen strength. A parametric study was conducted with different mean vectors and correlation lengths for each material property used in the above procedure. The calculation time was about ten seconds for the direct method and about three minutes for the sensitivity methods. As the cohesion and correlation length increased, the mean value of the critical load and the standard deviation increased. On the contrary, they decreased as the friction angle increased. Also, in all cases, the direct and sensitivity methods yielded very similar results.

• Journal of Korean Society of Rural Planning
• /
• v.21 no.4
• /
• pp.157-165
• /
• 2015

The purpose of this study is on identifying charactreistics and management direction of complementary pond of Dalmaji village in Gangjin. Accordingly, this village was indicated as Experience and Resort village by Korean government. This study describes the construction background and characteristics and identifies species diversity and characteristics through field survey. For this, literature and field survey was performed. In field survey, vegetational survey was performed in Aug. of 2015. D(Dominant degree) and S(Sociability degree) was measured by Brown-Blanquet's method. The answer was searched from Myungsanron(明山論), a textbook of Fengsui(風水) in Joseon dynasty. Of these causes, it was considered that the representative one is a protection of fire and infectious disease because the Wolgak mountain is a fire mountain(火山) as a stone mountain in Fengsui. The results demonstrate decline of aquatic ecosystem because of neglect management. The total number of species was 24. Of the species, Zelkova serrata is a natural vegetation of this complementary forest. This is nominated as Lagerstroemia indica and Camellia japonica community. Species composition demonstrate the characteristics of Korean southern region as mixed forest of evergreen trees and deciduous ones which are indigenous plants. It was considered Juniperus chinensis KaizukaVariega in central round island was planted in Japanese colonial period and it have to be removed. It was considered that name of moon pond and moon island etc. projects the mind of village ancestors which are going to reach an ideal condition of moon. And management of quantity and depth of pond water was critical for restoration of disappearing lotus from related literature. Periodic management was needed for ecological structure and function improvement because of ecological disturbance by the invasive plants like Humulus japonicus.