Bone mass accretion during puberty appears to be critical in the development of peak bone mass. Although bone density of females in Korea has been studied, only a few studies have related bone mass with anthropometric patterns or puberty in the pubescent girls. This study was conducted as part of a study of major determinants of bone development during puberty. Subjects were aged 14∼16 yr(mean 14.97), and had no history of disorders or dedication use likely to influence bone or calcium metabolism. Bone mineral density and content were measured by dual energy X-ray absorptiometry using a Lunar DPX+Scanner (Lunar Madison, WI). Also, total body fat, and total lean body mass were assessed using a Lunar DPX dual-energy X-ray absorptiometer, Pubertal status was assessed according to the Marshall and Tanner guidelines. Serum levels of osteocalcin was measured by RIA using a commercial kit assay. Skinfold measurements were taken with a skinfold caliper(Lange Caliper, USA). Data were analyzed using the regression and GLM procedure of the statistical package SAS. The results indicated that the observed means for lumbar spine BMD and femoral BMD correspond to approximately 91% and 96% of the means for young adult females, respec tively. All subjects were menarchal, with the majority being in the middle to end stages of pubertal development. Total body BMD was positively related to fat mass(P<0.001), lean body mass and time since menarche, and negatively related to urine pyridinoline, serum alkaline phosphatase and osteocalcin. The data indicate that girls who reported lower age for menarche had significantly higher bone densities than girls who reported higher age for menarche. Attaining peak skeletal bone mass during puberty may reduce the incidence of osteoporosis in later life. this finding suggests that early menarche may augment peak bone mass, influencing the extent of bone loss later in adulthood. The results suggest that good nutrition in childhood appears to be needed not for growth and development, but possibly also to assure an optimal peak of bone mass and thus greater latitude for the maintenance or skeletal integrity in the face of bone losses. Troeps skinfold thickness was a better predictor of total BMD and total BMC than was any other skinfold thickness. The study did not find a relationship between total BMD and body fat %, but total fat was significantly positively related to total BMD(r=0.49) and total BMC(r=0.60). It supports earlier report that there was a significant correlation between TBMD and body weight. Conclusively, total fat, lean body mass and pubertal development could influence BMD in pubescent girls. Clearly, longitudinal studies are required to assess the effect of puberty on peak bone mass, and to define further the potential determinants of peak bone mass.
In general, understanding groundwater flow in fractured bedrock is critical during tunnel and underground cavern construction. In that case, borehole data may be useful to examine groundwater flow properties of the fractured bedrock from pre-excavation until completion stages, yet sufficient borehole data is not often available to acquire. This study evaluated groundwater discharge rate into Jikri tunnel in Gyeonggi province using hydraulic parameters, groundwater level data in the later stage of tunneling, national groundwater monitoring network data, and electrical resistivity survey data. Groundwater flow rate into the tunnel by means of analytical method was estimated $7.12-74.4\;m^3/day/m$ while the groundwater flow rate was determined as $64.8\;m^3/day/m$ by means of numerical modeling. The estimated values provided by the numerical modeling may be more logical than those of the analytical method because the numerical modeling could take into account spatial variation of hydraulic parameters that was not possible by using the analytical method. Transient modeling for a period of one year from the tunnel completion resulted in the recovery of pre-excavation groundwater level.
This essay focused on the critical review of Korean National Archives System(KNAS) since 1999. We think that KNAS could establish the backbone with basic records law on 1999. It's right. But it is not enough for explaining the full historical growth. there are some factors below the growth. This essay tried to the basic three factors below. That means the the demonstration discourse, archival system practices, and archiving technologies in the contexts of the unique standard by the basic records law. These three factors have been the powerful engine for the take-off of KNAS since 1999. However, the powerful history has shadows of growth. This essay narrated the shadows by the frame of 'counter-destiny'. The most dangerous shadow is the loss of archival cultures because the KNAS has been composed of efficiency mentality. That means that KNAS has no unique archival culture for citizenship. So, this essay tried to talk about 'Post1999' to Archives Community.
Various competencies such as critical thinking, systems thinking, problem solving competence, communication skill, and data literacy are likely to be required in the 4th industrial revolution. The competency regarding data literacy is one of those competencies. To nurture citizens who will live in the future, it is timely to consider research on teacher education for supporting teachers' development of statistical thinking as well as statistical knowledge. Therefore, in this study we developed and implemented a data analysis project for pre-service teachers to understand their changes in statistical knowledge in addition to their experiences of data-driven decision making process that required them utilizing their statistical thinking. We used a mixed method (i.e., sequential explanatory design) research to analyze the quantitative and qualitative data collected. The findings indicated that pre-service teachers have low knowledge level of their understanding on the relationship between population means and sample means, and estimation of the population mean and its interpretation. When it comes to the data-driven decision making process, we found that the pre-service teachers' experiences varied even when they worked as a small group for the project. We end this paper by presenting implications of the study for the fields of teacher education and statistics education.
This thesis aims at examining his understandings about the The Great Learning centering on the of the founder of the YiYongHuSaeng School (利用厚生學派: A school who pursued prosperous economy and welfare of people) orthe BukHak School(北學派: A positive school that pursued mercantilism) from the Joseon Dynasty, Dam-Heon Hong Dae Yong (1731-1783). 1) From what is indicated in the , his studies mainly focused on the annotations from DaeHakJangGuDaeJeonJipJu ("大學章句大全集註": A book that edited different phrases from the Great Learning into chapters and paragraphs), Questioning of the Great Learning", and "JuJaUhRyu (朱子語類: A book of Confucian literature written by Yeo Jung Deok" of Zhu Xi who was a representative scholar of the Neo-Confucianism in the Song Dynasty. 2) Acknowledging entirely the arguing points of Zhu Xi, he is taking a critical position in a way that partial doubts are divided into seven chapters and questioned. 3) For the main characteristic and direction of the questioning, he is estimating that Zhu Xi only stressed the 'means' and 'interior' out of the world of 'means and ends' and 'interior and exterior' in Zhu Xi's recognizing and handling cases; instead, he emphasized putting equivalent value on the 'ends' and 'exterior' as well. 4) In fact, such questions raised partially were misconceived since they were not carried out through profound understanding nor systematic logic expansion of what Zhu Xi insisted. 5) Despite this, at the point where Neo-Confucian thoughts were fixed and weakened only with its form left in the late Joseon Dynasty, his perspective on the study of Confucian classics that the 'ends' and 'exterior' should be as equally valued as the 'means' and 'interior' by examining through the core text of the Neo-Confucianism, The Great Learning has its significance in his YiYongHuSaeng dogma that says politicians, by all means, should provide the ruled with economic convenience and welfare and this is their very right virtue.
Proceedings of the Korean Society for Technology of Plasticity Conference
/
2007.05a
/
pp.413-416
/
2007
In general, by means of the electrodepositing technique, a copper foil sample was prepared with a high purity and a high density. But the mechanical properties of the electrodepositing copper foil was lower than it's the rolling copper foil. However, the production of copper foil with approximately 36 microns thick in rolling process was very difficult. This paper describes the outline of the high accuracy cold rolling in 6 high mill which was developed for the purpose of rolling very thin accurate gauge copper foil(36 micron thick), and give several rolling characteristic of 600 mm wide copper foil. a) Large strain can be accumulated pass by pass in industrial multi-pass rolling processing to overcome large critical strain for thickness accuracy through optimization of rolling schedule. b) Also, permissible tension for rolling 0.45 $\sim$ 0.036 mm thick copper strip stably in accordance with the each pass work had been established by FEM simulation results. c) During the plate rolling process, considerable values of the forces of material pressure on the tool occur. These pressures cause the elastic deformation of the roll, thus changing the shape of the deformation region. A numerical simulation of roll deflection during cold rolling is presented in the paper. d) The proposed pass schedule can roll very thin copper foil of 36 micron thickness to a tolerance of ${\pm}1$ microns. The validity of simulated results was verified into rolling experiments on the copper foil.
Journal of the Korean institute of surface engineering
/
v.34
no.5
/
pp.465-474
/
2001
Type 304SS coatings were performed at 200$\square$ onto AISI 1045 carbon steel substrate using unbalanced magnetron sputtering (UBMS) with an austenitic AISI 304 stainless steel (SS) target of 100mm diameter. The total deposition pressure in the active Ar gas was 2$\times$10$^{-3}$ Torr. Coatings were done at various target power densities and bias voltages. Chemical compositions of metallic elements of the coatings were measured by energy dispersive X-rays spectroscopy (EDS). The structure and the morphology of Type 304SS coatings were investigated by means of X-ray diffraction (XRD) and scanning electron microscopy (SEM). Corrosion properties of the coated specimens were examined using electrochemical polarization measurements and electrochemical impedance spectroscopy in a deaerated 3.5% NaCl solution. The porosity rate was obtained from a comparison of the dc polarization resistance of the uncoated and coated substrates. Scratch adhesion testing was used to compare the critical loads for different coatings. XRD results showed that the sputtered films exhibit a ferritic b.c.c. $\alpha$-phase. Potentiodynamic polarization curves indicated that all samples had much higher corrosion potential and better corrosion resistance than the bare steel substrate. The corrosion performance increased with increasing power density and the adhesion was enhanced at the bias voltage of -50V. An improvement in the corrosion resistance can be obtained with a better coating adhesion. Finally, an optimized deposition condition for corrosion protection was found as $40W/cm^2$ and -50V.
In 2008, the Korean Supreme Court came across a plaintiff's claim to return his deceased father who had left family more than four decades ago and lived with another spouse(de facto) in the meantime to be buried after death in a cemetery of his own choice. The major opinion decided to approve the claim, on the ground that the first legitimate son should be the "head worshiper" prescribed in the article 1008-3 of the Korean Civil Code and that the corpse belong to the head woshiper, i. e. the head woshiper has a special "limited ownership" over the corpse for the purpose of its burial and worship, adding that a deceased's disposition inter vivos, if any, be only ethically but by no means legally binding others, including the head worshiper of course. Here scrutinized are the historical developments starting from the Roman criminal law of sepulchri violatio(trespass to grave) through the Canon law of the Middle Age and the doctrinal reactions to the challenges of anatomy and surgery to the formation of the "supporting the deceased" theory in Germany as well as the similarities in other european continental countries(Switzerland, Austria and France). The comparative review shows that the right of remaining family could neither be identified as limited "ownership" nor that the controversy over a corpse be solved by exclusively attributing/distributing it to one/some of the descendants. In principle, the question should be approached in the extension of family support.
In the areas of CAE, CAD and CAO integration & automation technology, the word 'File Wrapping' means a virtualization of TEXT files that supports variables-based I/Os like variable assignments in programming languages. This File Wrapping process is one of the cornerstones of CAE, CAD and GAO integration & automation, and the performance of File Wrapping process, which is depending on the sire of a TEXT file to be accessed and the number of regions and their distribution, has a critical effect on the total performance of the CAE, CAD and CAO integration & automation systems. In this paper, we define TEXT File Region Management which generalizes the main functions of the File Wrapping process, and describe a prototype of TEXT file Region Management which is implemented as a Grid service. After that, the validity of the proposed model and the TEXT File Region Management service are discussed with evaluation results of the prototype.
Background: In Iran, there are high rates of breast cancer. It is among the five most common cancers, the first among cancers diagnosed, and is the leading cause of cancer deaths among Iranian women. Objectives: The purpose of this qualitative study was to explore perception of breast cancer screening among Iranian women who have never had a mammograph. Materials and Methods: The current study was part of a qualitative research conducted by means of content analysis method and purposive sampling of 16 women over the age of 30 years who had not undergone mammography using individual semi-structured interviews. Interviews were recorded and transcribed verbatim. The data were under continuous consideration and comparative analysis in order to achieve data saturation. Results: After codification of data, three concept categories were achieved including: i) low awareness, ii) worries, and iii) lack of motivation. Conclusions: Although there is a tendency among Iranian women to participate in breast cancer screening, there is a powerful cultural belief that breasts are sexual organs that should not be discussed publicly. Due to the incidence of breast cancer in Iranian women, it is critical that breast awareness education be performed by health care experts to explore the concepts of breast cancer and breast cancer screening.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.