• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.4 s.97
• /
• pp.388-394
• /
• 2005

This paper has the object of investigating natural frequencies of tapered thick plate on Pasternak foundation by means of finite element method and providing kinetic design data for mat of building structures. Vibration analysis for tapered thick plate subjected to in-plane stress is presented in this paper. Finite element analysis of rectangular plate is done by use of rectangular finite element with 8-nodes. Analysis conditions of tapered thick plate are as follows each. The ratio of in-plane stress to critical load is varied with $0.2\sigma_{cr}$, $0.4\sigma_{cr}$, $0.6\sigma_{cr}$. The Winkler parameter is 0, 10, 100, 1000, the shear foundation parameter is 0, 10 and the taper ratio is 0.0, 0.2, 0.4, 0.6, 0.8.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.581-586
• /
• 2004

This paper presents Newtonian formulation of the dynamics of plates treated fully with Active Constrained Layer Damping (ACLD). The developed equations of the plate/ACLD system provide analytical models far predicting the dynamic of laminated plates subjected to passive and active vibration damping controls. Numerical solutions of the analytical models are presented fir simply-supported plates in order to study the performance of the plate/ACLD system for different control strategies. The developed models present invaluable means for designing and predicting the performance of the smart laminated plates that can be used in many critical engineering applications.

• Proceedings of the IEEK Conference
• /
• 2002.06e
• /
• pp.173-176
• /
• 2002

DAS(Data Acquisition System) as a ground support equipment has played a critical role in proving the status of ready-to-fire of a rocket system before launch. But it is hard to implement and place a real-time measuring system in a control room at a long distance from the vehicle. In this paper DAS is introduced by being located at the LEC(Launch Equipment Container)[1], 50 meters away from the rocket and connected to remote monitoring system via fiber optics with TCP/IP protocol by means of client/server algorithm. Therefore real-time data acquisition and storage are guaranteed and a convenient and useful MMI (Man-Machine Interface) can be developed.

• Knowledge Management Research
• /
• v.9 no.1
• /
• pp.147-161
• /
• 2008

In the previous KM (Knowledge Management) studies, it has been repeatedly pointed that CoP (Community of Practice) should be used as a platform for boosting up corporate innovative activities. Despite this, it is very rare to find relevant literature in which real-world cases are introduced showing critical success factors, implemented strategies, and objective analysis of results. In this sense, main objective of this paper is very timely- to introduce a real-world CoP case in which POSCO, world-leading steel company, sorted out creative CoP strategies to nurture knowledge-sharing activities to solve various kinds of problems at hand, and maintain appropriate level of knowledge circulation throughout all the working units of company. In a nutshell, POSCO has been successful in any measure in utilizing the creative CoP activities as strategic means to change the paradigm of innovation and extract fruitful outcomes from integrating three important individual activities such as work, learning, and innovation.

• International Commerce and Information Review
• /
• v.9 no.2
• /
• pp.141-160
• /
• 2007

Though the brand management of trade shows are increasingly important, there are few studies with this theme. This research studies what factors have an effect on the brand loyalty of trade shows. To this purpose, we conduct empirical study on the relationship among perceived quality, perceived value, image of the trade show with attendee's satisfaction and loyalty of trade show. The results of this study are as follows: (1) Perceived quality has a direct effect on perceived value and satisfaction of trade show and indirect effect on attendee's loyalty of the trade show. (2) Perceived value has a direct effect on attendee's satisfaction and indirect effect on attendee's loyalty of the show. (3) Trade show image has a direct effect on perceived value, attendee's satisfaction and loyalty of the trade show. Especially, image has the greatest effect on attendee's satisfaction and loyalty of the show. This means that the trade show image a critical variable in the brand management of the show.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.1
• /
• pp.180-188
• /
• 1996

The stress singularity of a sharp wedge contacting a half plane can be avoided by changing the wedge shape. Shape optimization is accomplished with the geometric strain method (GSM), an optimality criterion method. Several numerical examples are provided for different materials in the wedge and half plane to avoid stress singularity neal the sharp corner of the wedge. Optimum wedge shapes are obtained and critical corner angles are compared with the angles from analytical contact mechanics. Numerical results are well matched to analytical and experimental results. It is shown that shape optimization by the geometric strain method is a useful tool to reshape the wedge and to avoid a stress singulatiry. The method applies to more general geometries where the singular behavior would be difficult to avoid by classical means.

• ALGAE
• /
• v.23 no.3
• /
• pp.187-199
• /
• 2008

A study on the fine structure of the marine diatom Thalassiosira has been carried out during the periods from January 2007 to March 2008 in Korean coastal waters. As the third series of the Thalassiosira species, a fine structure, description, distribution and taxonomic remarks of the six Thalassiosira species were observed by means of light microscope and scanning electron microscope. The critical features of Thalassiosira species were a shape of external tubes of marginal strutted processes and labiate process. Six species showed each different shape of external tubes, marginal strutted processes and labiate process. The shape of external tube was divided into five types: T shape of Thalassiosira curviseriata, small-rounded shape of T. lundiana, double-layer form and flame shape of T. nordenskioeldii, tulip shape of T. punctigera and tooth-shape of T. tenera. This external character may be able to key character for positive identification of the Thalassiosira species. Of these Thalassiosira lundiana, T. minuscula and T. tenera were new records for Korean coastal waters.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.05a
• /
• pp.169-171
• /
• 2012

Although work-efficiency of construction machinery is a critical factor for estimating its workable-quantity per unit time, the coefficient figure table presented in the Poom-Sam that is used for Construction Cost Estimation of public sectors in Korea is very subjective for practical usage. In order to suggest objective work-coefficient table for a Tub Grinder, domestic and overseas documentary records were investigated and on-going construction sites were also visited. The research found that the table can be revised by means of detailing down by several factors. The research will be the foundation for applying the rapid development of Construction Equipment and technology to the appropriate cost estimations and the ground work of related studies.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2006.11a
• /
• pp.245-248
• /
• 2006

This paper presents the results from a survey on root causes that led to fatal accidents in construction projects In Vietnam. The survey was conducted by means of structured questionnaires and interviews with relevant individuals such as Foremen, field engineers, and project managers working in construction companies located in Ho Chi Minh City, the largest city of Vietnam. The survey sample consists of in total 91 fatal accident cases that occurred in construction projects during the years 1996-2005 and were recorded in a report at the Vietnam Department of Labor-Invalids-Social Affairs. The current effort is aimed at determining the essential measures for avoiding fatal accidents that have been increasingly taking place in Vietnam construction firms. The findings from the survey provided a necessary basis for determination of critical factors to be used as safety indexes in developing a checklist for preventing fatal accidents in future construction project

• Journal of Conservation Science
• /
• v.4 no.1 s.4
• /
• pp.53-58
• /
• 1995

In order to establish the procedures for investigating environmental influences to wooden cultural property, existing study data were surveyed and necessary steps for performing the investigation works were presented to be applied for the future works in this country. Environmental factors which influence to the conservation of wooden cultural property should first be studied for items concerned with their damage situations. On basis of these data, laboratory works to yield the standard value for each factor should be conducted by means of testing samples exposed under laboratory simulated environmental conditions. Outdoor measurements may be followed for samples exposed to the open air at the site of that property. These data may be compared with those of laboratory standard value and overall evaluation for the factor influencing mostly tn the damage status of that property may further be conducted. Referring data obtained in this investigation, necessary measures to be taken for conserving that property may be able to be established.