• 인지과학
• /
• 제18권2호
• /
• pp.113-138
• /
• 2007

풍경 그림을 사용하여 도식이 기억에 미치는 영향을 알아보았다. 실험 1에서는 즉시 검사를 실시하여 부호화할 때 도식이 기억에 미치는 영향을 알아보았고, 실험 2에서는 3일 지연 검사를 실시하여 파지기간 동안 도식이 기억에 미치는 영향을 알아보았다. 두 실험 모두에서 제시시간(250ms vs 1000ms)을 다르게 하고 목표 미끼를 생략하는 조건과 목표 미끼를 다른 물건으로 대체하는 조건으로 항목의 축어적 정보 부호화를 조작하였다. 특히 생략과 대체 조건을 비교하여 도식에 기반한 기대라는 하향정보 특정항목에 대한 상향정보가 기억에 미치는 효과를 알아보았다. 두 개의 실험에서 전형적인 항목에 대한 오기억은 지연검사에서도 별 변화가 없는데 반해 학습 항목에 대한 기억은 감소하였으며, 오기억은 생략조건에서 더 많이 보고되었으나, 비전형 항목에 대한 기억은 감소하였으며, 오기억은 생략조건에서 더 많이 보고되었으나, 비전형 항목에 대한 기억은 대체조건에서 더 많이 보고되었다. 이 결과는 도식에 기반한 오기억은 비교적 지속적이며, 도식에 의한 기대라는 하향 정보가 상향 정보와 충돌이 일어날 때에는 오기억이 감소한다는 사실을 보여 주었다.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2003년도 유체기계 연구개발 발표회 논문집
• /
• pp.167-173
• /
• 2003

For the measurement of mass flow rate at a wide range of operation conditions, it is required that the critical nozzle gas different diameters, since the mass flow rate through the critical nozzle depends on the nozzle supply conditions and the nozzle throat diameter. In the present study, both computational and experimental investigations are performed to explore the variable critical nozzle. Computational work using the 2-dimensional, axisymmetric, compressible Navier-Stokes equations are carried out to simulate the gas flow through variable critical nozzle. In experimnet, a cylinder with several different diameters is inserted into the critical nozzle to vary the nozzle throat diameter. Computational results are compared with the experimented ones. The computed results are in close agreement with experiment. It is found that the displacement and momentum thickness of variable critical nozzle are given as a function of Reynolds numbers. The discharge coefficient of the variable critical nozzle is predicted using an empirical equation.

• 대한기계학회논문집B
• /
• 제26권10호
• /
• pp.1419-1426
• /
• 2002

An experimental study was made to elucidate critical heat flux(CHF) characteristics in a two-phase concentric-tube thermosyphon. The experiment was performed by using saturated water, over the experimental range of configuration: inner diameter of heated outer tube D=12mm, outer diameter of unheated inner tube do=3 to 10mm and heated tube length L=100 to 1000mm. The experiment shows that the CHF is enhanced with increase in the inner tube diameter, and that the CHF decreases beyond a certain diameter of the inner tube. There is an optimum diameter for inner tube that maximizes the CHF, for each tube length and test liquid. The CHF maximum is about two to eight times as large as that without an inner tube. For a large inner tube, the CHF characteristics is similar to that for natural convective boiling in a vertical annular tube.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.613-616
• /
• 2006

The purpose of the this study of to define the critical corrosion amount of the steel cause the cracking of concrete cover. The major variables of the critical corrosion amount are concrete strength and thick of the concrete cover. In this experiment, the constant of stress concentration is added by a new variable. As a result of the experiment, it is confirmed to less decrease in the critical corrosion amount following the constants of stress concentration increased. Besides, electric currents were measured through a generator of constant voltage. When connecting constant voltage with corrosion circuit, it was discovered that magnitude of the change come out similarly between displacement on the concrete cover and electric current according to time.

• 전기학회논문지
• /
• 제57권11호
• /
• pp.1970-1975
• /
• 2008

Critical current of the superconducting machines is limited by the magnetic field. When the magnetic field is not uniform, it is difficult to estimate the magnetic field and the critical current. This paper proposed a method for the estimation of the magnetic field and the critical current of the HTS pancake windings which can be used to generate the high field magnet. A parameter which was needed to calculate the critical current of a BSCCO magnet with 10 pancake windings was obtained by the experiment. Test which was carried out by using single pancake winding and magnet consisting of 10 pancake windings shows the proposed method can be an effective method for the estimation of the critical current of pancake windings.

• Journal of Welding and Joining
• /
• 제1권2호
• /
• pp.53-60
• /
• 1983

COD test based on fracture mechanics concept was used in this study to evaluate the fracture toughness quantitatively. Effects of specimen sizes on critical COD value for ABS EH 36 steel and its submerged arc weldments, and the variation of critical COD value depending on metallurgical/mechanical heterogeneities caused by weld thermal cycles were investigated. Experiment was performed by using specimens made from base metal and submerged arc weldments according to BS 5762. Obtained results are summarized as follows; 1) Critical COD value for base metal decreases with increasing thickness of specimen. On hand, as the reduction ratio of critical COD decreases with increasing specimen thickness, critical COD value becomes constant above a thickness of specimen. 2) Critical COD value for weldment decreases with increasing thickness of specimen and was also affected by metallurgical states of base metal. 3) Size effects for weldment was greater at the hardened region. 4) Critical COD value was affected by microstructural change due to weld thermal cycles in weldments; that is, accicular ferrite formation is favorable for increasing of COD value.

• 한국수학교육학회지시리즈A:수학교육
• /
• 제50권1호
• /
• pp.69-87
• /
• 2011

The aim of this research is to develop a 'program which improves critical thinking' to improve elementary school students' mathematical thinking, and investigate the effect of program by applying and verifying the program. In order to achieve the objective, the author determined the factors of critical thinking capabilities matched to the discipline of mathematics, and accordingly designed relevant programs and test questions for critical thinking skills which contributes to improving the critical thinking of elementary school students, and thus applied the program the developed program of improving the critical thinking to both preliminary and main experiments, which verified the effects of the test method. The following results have been acquired through this research : In the preliminary inspection that this researcher has developed, it was able to predict that 'the program which improves critical thinking' would have a positive influence on the students' critical thinking. In the main experiment which was performed after modifying and supplementing it, the result showed that the program had a positive influence on the students' critical thinking.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.484-489
• /
• 2003

The mass flow rate of gas flow through critical nozzle depends on the nozzle supply conditions and the cross-sectional area at the nozzle throat. In order that the critical nozzle can be operated at a wide range of supply conditions, the nozzle throat diameter should be controlled to change the flow passage area. This can be achieved by means of a variable critical nozzle. In the present study, both experimental and computational works are performed to develop variable critical nozzle. A cone-cylinder with a diameter of d is inserted into conventional critical nozzle. It can move both upstream and downstream, thereby changing the cross-sectional area of the nozzle throat. Computational work using the axisymmetric, compressible Navier-Stokes equations is carried out to simulate the variable critical nozzle flow. An experiment is performed to measure the mass flow rate through variable critical nozzle. The present computational results are in close agreement with measured ones. The boundary layer displacement and momentum thickness are given as a function of Reynolds number. An empirical equation is obtained to predict the discharge coefficient of variable critical nozzle.

• 한국초등과학교육학회지:초등과학교육
• /
• 제28권2호
• /
• pp.105-120
• /
• 2009

Critical Experiments (CE) in science classrooms mean, tentatively, critical situations as comparable to anomalous cases in scientific revolutions where the results of science experiments in schools are unclear, differ from the theory, or students misunderstand the purpose of the experiments. The purpose of this research is to identify what CE occurred during science classes and to investigate how elementary teachers handled them. To analyze how teachers recognized and handled CE, we selected nine typical CE from the $7^{th}$ Korean science curriculum. 125 teachers were selected from 8 districts' elementary schools in a local city. A questionnaire with photos of the nine CE above-mentioned was distributed to these teachers. The focus in this research was the way that each teacher handled the CE. We discovered that there were three basic ways in which teachers handled CE. When CE occurred, 51% of elementary teachers explained the correct result of the experiment (what should have happened) to the students while 40.7% of the teachers repeated to get the correct results. The focuses of handling CE varied. 57 % of the teachers focused on the 'materials' while 30% of the teachers focused on the 'theory'. The other focus was 'thinking'. Only 7.6% of the teachers answered that they gave students a chance to think about the reasons why the CE happened. By analyzing our survey results, we could determine what each teacher did as a follow up to the CE and their focus and reasoning for handling the CE this way. When the CE happened in the science class, few handled the CE with the point of view about purpose of doing experiment. As a result, students could not gain educational experience from the CE. If we use CE as a new method to teach science, it will be a good subject incorporating the nature of science in science education.

• 한국수자원학회논문집
• /
• 제53권3호
• /
• pp.167-179
• /
• 2020

최근 바이오폴리머 소재를 이용하여 자연 흙의 강도와 식생의 생장을 증진하는 새로운 제방 소재가 개발되었다. 본 연구에서는 바이오폴리머 혼합토를 친환경 제방 재료로 활용하기 위해 혼합토로 조성된 식생 매트의 한계 소류력을 평가하였다. 혼합토는 베타글루칸을 주재료로 모래와 황토를 혼합하여 조성하였다. 실규모 시험체를 제작하여 혼합토를 3 cm 도포하였으며 식생과 매트를 이용하여 4개의 시험체를 제작하였다. 실규모 실험에 의해 손상과 토양유실을 관측하여 한계 소류력을 결정하였다. 식생 호안의 특성상 식생의 피복도에 따라 영향을 받기는 하지만 식생이 활착된 경우 개략적으로 한계소류력 42 N/㎡, 한계유속 4 m/sec을 실험을 통해 확인하였다. 또한 매트공법이 적용된 경우에는 뿌리와 매트의 결합으로 침식저항성이 강화됨을 확인하였다.