• Korean Journal of Materials Research
• /
• v.27 no.10
• /
• pp.518-523
• /
• 2017

In commercial solar cells, the pattern of the front electrode is critical to effectively assemble the photo generated current. The power loss in solar cells caused by the front electrode was categorized as four types. First, losses due to the metallic resistance of the electrode. Second, losses due to the contact resistance of the electrode and emitter. Third, losses due to the emitter resistance when current flows through the emitter. Fourth, losses due to the shading effect of the front metal electrode, which has a high reflectance. In this paper, optimizing the number of finger on a $4{\times}4$ solar cell is demonstrated with known theory. We compared the short circuit current density and fill factor to evaluate the power loss from the front metal contact calculation result. By experiment, the short circuit current density($J_{sc}$), taken in each pattern as 37.61, 37.53, and $37.38mA/cm^2$ decreased as the number of fingers increased. The fill factor(FF), measured in each pattern as 0.7745, 0.7782 and 0.7843 increased as number of fingers increased. The results suggested that the efficiency(Eff) was measured in each pattern as 17.51, 17.81, and 17.84 %. Throughout this study, the short-circuit current densities($J_{sc}$) and fill factor(FF) varied according to the number of fingers in the front metal pattern. The effects on the efficiency of the two factors were also investigated.

• Korean Journal of Microbiology
• /
• v.45 no.1
• /
• pp.17-25
• /
• 2009

We studied soil components, methane production, the number of methanogens, and T-RFLP patterns dependent on agricultural methods with the change of seasons. There is no regular increase or decrease tendency of the most soil components followed by sampling period. And the water content in soil was higher in October than May. Also a lot of methanogens existed in soil, and acetotrophs were relatively of smaller number than hydogenotrophs and formate utilizing methanogens using MPN (most probable number) enumeration. In the experiment using the formate, it was used from the first week, and only a minute amount was detecte after four weeks. However in the acetate, it was increased until the third week, and after that was consumed. And there was higher methane production for all soil samples which administered with the hydrogen spike. The activity of methanogens was higher in the organic and low-agrichemical agricultural method samples, and the organic agricultural method had high methanogen activity among the other samples. A result of T-RFLP pattern of mcrA gene digested with Sau96I, methanogen community have a little relation with agricultural methods and seasons. This results also agreed to no critical difference the soil components dependent on agricultural methods, but some analytical data have a positive relationship with a agricultural methods. Therefor we could concluded that the comparison study of community for soil bacteria sufficiently could be useful for the microbiological indicator.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.2
• /
• pp.91-99
• /
• 2014

The common-rail injectors are the most critical component of the CRDI diesel engines that dominantly affect engine performances through high pressure injection with exact control. Thus, from now on the advanced combustion technologies for common-rail diesel injection engine require high performance fuel injectors. Accordingly, the previous studies on the numerical and experimental analysis of the diesel injector have focused on a optimum geometry to induce proper injection rate. In this study, computational predictions of performance of the diesel injector have been performed to evaluate internal flow characteristics for various needle lift and the spray pattern at the nozzle exit. To our knowledge, three-dimensional computational fluid dynamics (CFD) model of the internal flow passage of an entire injector duct including injection and return routes has never been studied. In this study, major design parameters concerning internal routes in the injector are optimized by using a CFD analysis and Response Surface Method (RSM). The computational prediction of the internal flow characteristics of the common-rail diesel injector was carried out by using STAR-CCM+7.06 code. In this work, computations were carried out under the assumption that the internal flow passage is a steady-state condition at the maximum needle lift. The design parameters are optimized by using the L16 orthogonal array and polynomial regression, local-approximation characteristics of RSM. Meanwhile, the optimum values are confirmed to be valid in 95% confidence and 5% significance level through analysis of variance (ANOVA). In addition, optimal design and prototype design were confirmed by calculating the injection quantities, resulting in the improvement of the injection performance by more than 54%.

• Korean Journal of Organic Agriculture
• /
• v.20 no.2
• /
• pp.221-230
• /
• 2012

Rumen fermentative characteristic is useful indicators of the quality of ruminant feed stuffs and diets. An in vitro rumen fermentation experiment was therefore carried out to compare fermentation patterns among three forage sources. These were whole crop barley (WCBS), Italian ryegrass silage (IRGS) and rice straw silages (RSS). Rice straw (RS) was the control, making the treatments 4 in total. Forages were randomly allocated to serum bottles. The incubation times were arranged 0, 3, 6, 9, 12, 24, 48 and 72h at $39^{\circ}C$, respectively. Each forage source was replicated 3 times per incubation time. At each sampling time, total gas and pH were measured, whilst individual volatile fatty acids (VFAs), total volatile fatty acids (TVFAs) and ammonia nitrogen ($NH_3$-N) were determined later after storing samples at $-20^{\circ}C$. Acetate: Propionate ratio (A/P) was then calculated. Forage source had a significant effect (P<0.001) on pH and $NH_3$-N. RSS maintained higher pH values than the rest of the forage sources. A decreasing pH trend with increased time of incubation, in agreement with literature, was observed for all forage sources. WCBS recorded $NH_3$-N values higher than all the other treatments. Total gas, individual and total VFA and A/P ratio were not affected by forage source. However, there was a significant difference in all parameters (p<0.05) among forage sources at sampling periods at 3 to 72h. Therefore, the present results indicating that WCBS, IRGS, RS and RSS maintained in vitro rumen pH above the critical value. Also, WCBS produced the highest NH3-N and on this merit could be of better nutritive value, in vivo, in the ruminant.

• Korean Journal of Soil Science and Fertilizer
• /
• v.11 no.2
• /
• pp.61-66
• /
• 1979

This experiment was conducted to find out the simple and economical method to improve physical properties of the soil that was very poor for the establishment of orchard. Jeonnam clay loam soils distributed mainly on rolling and hill side slope, were treated with the explosion of two kinds of dynamite at the depth of 1 m. The change of physical properties was investigated vertically and horizontally after soil profile had settled to some extent. The results were summarized as : 1. The original soil was very high in bulk density and soil hardness. Total porosity and aeration porosities were lower than critical level providing root elongation. It was more apparent in the subsoil than in the surface soil. 2. It was recognized that soil mass destruction and cracking by dynamite explosion decreased soil bulk density and soil hardness and increased porosity, especially non-capillary pores. 3. Effective radius of the improved physical properties by explosion with two dynamites was 100cm at 60cm depth and 30cm at 80cm depth. But with the use of three dynamites it was 100cm at 80cm depth. 4. It was thought that soil mass destruction and cracking caused by explosion was uneven in the two dynamites, and three dynamites was more effective to improve physical properties evenly. 5. With the use of two dynamites, Ammonium explosive was superior to gelatin dynamite.

• Molecular & Cellular Toxicology
• /
• v.2 no.3
• /
• pp.176-184
• /
• 2006

The controversy on genotoxicity of molinate, an herbicide, has been reported in bacterial system, and in vitro and in vivo mammalian systems. To clarify the genotoxicity of molinate, we performed bacterial gene mutation test, in vitro chromosome aberration and mouse lymphoma $tk^{+/-}$ gene assay, and in vivo micronucleus assay using bone marrow cells and peripheral reticulocytes of mice. In bacterial gene mutation assay, no mutagenicity of molinate ($12-185{\mu}g/plate$) was observed in Salmonella typhimurium TA 98, 100, 1535 and 1537 both in the absence and in the presence of S-9 metabolic activation system. The clastogenicity of molinate was observed in the presence ($102.1-408.2\;{\mu}g/mL$) of metabolic activation system in mammalian cell system using Chinese hamster lung fibroblast. However, no clastogenicity was observed in the absence ($13.6-54.3\;{\mu}g/mL$) of metabolic activation system. It is suggested that the genotoxicity of molinate was derived some metabolites by metabolic activation. Molinate was also subjected to mouse lymphoma L5178Y $tk^{+/-}$ cells using microtiter cloning technique. In the absence of S-9 mixture, mutation frequencies (MFs) were revealed $1.4-1.9{\times}10^{-4}$ with no statistical significance. However, MFs in the presence of metabolic activation system revealed $3.2-3.4{\times}10^{-4}$ with statistical significance (p<0.05). In vivo micronucleus (MN) assay using mouse bone marrow cells, molinate revealed genotoxic potential in the dose ranges of 100-398 mg/kg of molinate when administered orally. Molinate also subjected to acridine orange MN assay with mouse peripheral reticulocytes. The frequency of micronucleated reticulocytes (MNRETs) induced 48 hr after i.p. injection at a single dose of 91, 182 and 363 mg/kg of molinate was dose-dependently increased as $10.2{\pm}4.7,\;14.6{\pm}3.9\;and\;28.6{\pm}6.3\;(mean{\pm}SD\;of\;MNRETs/2,000\;reticulocytes)$ with statistical significance (p<0.05), respectively. Consequently, genotoxic potential of molinate was observed in in vitro mammalian mutagenicity systems only in the presence of metabolic activation system and in vivo MN assay using both bone marrow cells and peripheral reticulocytes in the dose ranges used in this experiment. These results suggest that metabolic activation plays a critical role to express the genotoxicity of molinate in in vitro and in vivo mammalian system.

• Archives of design research
• /
• v.14 no.3
• /
• pp.59-68
• /
• 2001

The design on magazine advertisement has been developed and investigated in various fields, but the matter of properties has been inattentive in advertisement. Therefore, this study is to clarify the role of advertisement properties and the application tendency of it through the case study of the magazines for woman in Korea, and to analyze the relationship among the characteristic of manufactured goods for advertising, visual effects, copy-writing and the advertisement properties. The results of the study are as follows ; 1 . It is important to choose the discriminative property compared to the competitive company and to consider the purpose of advertisement from the beginning of idea developing. 2. Leading the photo artist to the photo working corresponding to the purpose of advertisement is critical point in advertisement design process. 3. After the photographing, it should be investigated from the designer's point of view. The presentation strategies on the application of advertisement properties are as follows, ·Conform the subject of advertisement massage. ·Choose the advertisement properties considered the relationship between manufactured goods for advertising and properties. ·Consider the properties as the supporting tool in bringing manufactured goods for advertising into relief. The pertinent application of advertisement properties is able to attract public attention and to increase the worthy of advertisement. Therefore, the prudent trial and experiment on it is needed.

• Korean Journal of Environmental Agriculture
• /
• v.17 no.2
• /
• pp.122-126
• /
• 1998

This experiment was conducted to verify the responses of major crop species to saline stress.To determine the saline tolerance of crop species, sevral crop species were cultivated under sand-culture system using Hoagland's nutrient solution whit 200mM NaCl. The crop species showing saline tolerance were cotton(Gossypium indicum), maize(Zea mays), barely(Hordeum vulgare), and wheat(Triticum aestivum) but perilla (Perilla frutescens) and leguminous crops, mung bean(Phaseolus radiatus), azuki bean(Phaseolus angularis) and soy bean(Glycin max) showed very por tolerance. One the typical symptom was the darkening of leaf color due to increase of chlorophyll concentration.Among of the plant families, Fabaceae was the most susceptible but crop species belonging to Poaceae were more proper for cultivating on reclaimed tidal land in the course of desalinazation. It was suggrsted that the crop species belonging to Fabaceae, a sensitive family to soil salinity, must be cultivated when the soil salinity decreased below 10ds/m. To know the critical salinity level for crop growth,salinity of saline soil collected from reclaimed tidal land was adjusted from 10.0ds/m tp41.7ds/m with tap water. It was suggested that the ECs of the soil in which the plant height of each crop spicies was reduced to 50% of control plant were 22.6 and 21.7 ds/m in rice, barley, corn, mung bean, and soy bean,respectively.

• Korean Journal of Environmental Agriculture
• /
• v.17 no.1
• /
• pp.26-33
• /
• 1998

This experiment was conducted to classify the plant species occurring in the saline reclaimed land by saline tolerance. The vegetation of reclaimed land was composed of various plant species from halophyte to glycophyte showing different saline tolerances. In the investigated saline region, reclaimed land of Youngjong island, Inchun city, 175 species belonging to 32 families were found. Our survey was carried out in two region, having different salinity due to different desalinization. The electricalconductivity (EC) of more saline region showed 48.0mS/cm nd the other region showed 13.0mS/cm. It is assumed that intensity of precipitation and runoff of rainfall may cause salinity gradient in the investigated region. The plant species occurred in the experimental region were classified as 72 species of annual, 42 species of biennial, and 61 species of perennial according to life cycle. For knowing relationship between vegetation of saline region and saline tolerance of occurring species, we tested the saline susceptibility of plant species collected at the saline regions. Testing plants were cultured by nutrient solution containing 200 mM NaCl, the critical concentration of survival in glycophytes. The saline tolerance was graded by the growing capacity in the sand-culture system. The more saline-tolerant species screened by sand culture were Atriplex gmelini, Suaeda asparagoides, Aster tripolium, Suaeda maritima, Salicornia herbacea, and Suaeda japonica. The most saline tolerant family was Chenopodiaceae. Poaceae, Cyperaceae, and Brassicaceae showed relatively high tolerance to saline stress. In the course of growth under the high saline condition, the most noticeable change was the darkening of leaves by increasing of chlorophyll content. The chlorophyll contents were increased with saline stress in most species.

• Journal of Internet Computing and Services
• /
• v.12 no.1
• /
• pp.99-110
• /
• 2011

Mobile environments rapidly changing and digital convergence widely employed, mobile devices including smart phones have been playing a critical role that changes users' lifestyle in the areas of entertainments, businesses and information services. The various services using mobile devices are developing to meet the personal needs of users in the mobile environments. Especially, an LBS (Location-Based Service) is combined with other services and contents such as augmented reality, mobile SNS (Social Network Service), games, and searching, which can provide convenient and useful services to mobile users. In this paper, we design and implement the prototype of mobile personal assistant (PA) agents. Our personal assistant agent helps users do some tasks by hiding the complexity of difficult tasks, performing tasks on behalf of the users, and reflecting the preferences of users. To identify user's preferences and provide personalized services, clustering and classification algorithms of data mining are applied. The clusters of the log data using clustering algorithms are made by measuring the dissimilarity between two objects based on usage patterns. The classification algorithms produce user profiles within each cluster, which make it possible for PA agents to provide users with personalized services and contents. In the experiment, we measured the classification accuracy of user model clustered using clustering algorithms. It turned out that the classification accuracy using our method was increased by 17.42%, compared with that using other clustering algorithms.