• Transactions of Materials Processing
• /
• v.30 no.4
• /
• pp.179-185
• /
• 2021

Lithium ion batteries are generally manufactured by laser and etching using aluminum thin sheet. These processes are relatively expensive and have low productivity. In this study, blanking process of aluminum thin sheet for lithium ion battery was employed to replace laser cutting and etching process, all to reduce the production cost and improve productivity. Mechanical properties for aluminum and coating were determined by experimental results and rule of mixture for FE analysis of blanking process. Normalized Cockcroft-Latham criteria was also applied to describe shear behavior and critical damage values were determined by comparison of analytical and experimental result. We performed FE analysis to investigate the effects of clearance and punch-die radius on sheared surface of aluminum thin sheet and to determine optimal process condition. We manufactured the die set using the determined optimal process and conducted an experiment to confirm the feasibility of blanking process. The sheared surface of manufactured product was observed by optical microscope. As a results, the proposed process conditions successfully achieved the dimensional requirement in production of lithium ion battery parts.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.36 no.2
• /
• pp.54-58
• /
• 2022

This study aimed to investigate the anti-stress function of Aucklandiae Radix (AR) and Cyperi Rhizoma (CR). The essential oils used in the experiment were extracted from AR and CR using Steam Distillation Extraction and Super critical CO₂ extraction. To observe the effects of sample administration, we measured feed intake, leukocytes, red blood cells, hemoglobin, platelets, serum serotonin content, immobility time, climbing time, and swimming time in mice subjected to chronic restraint stress as behavioral changes. The average body weight of all experimental groups increased than the average body weight of the control group. The immobility and climbing times of experimental groups A and B administered with supercritical extraction samples were shorter than those of the other experimental groups and the control group, and the swimming time was longer. The serotonin content in the blood of all experimental groups decreased compared to the normal group, and the serotonin content of the control group was increased. The authors suggest that Korean herbal medicines AR and CR may be utilized as anti-stress flavoring agents based on the above results.

• Nuclear Engineering and Technology
• /
• v.55 no.1
• /
• pp.37-44
• /
• 2023

Using the Kalman filtering technique, we propose a novel method for estimating the missing video frames to monitor the activities inside the control room of a nuclear power plant (NPP). The purpose of this study is to reinforce the existing security and safety procedures in the control room of an NPP. The NPP control room serves as the nervous system of the plant, with instrumentation and control systems used to monitor and control critical plant parameters. Because the safety and security of the NPP control room are critical, it must be monitored closely by security cameras in order to assess and reduce the onset of any incidents and accidents that could adversely impact the safety of the NPP. However, for a variety of technical and administrative reasons, continuous monitoring may be interrupted. Because of the interruption, one or more frames of the video may be distorted or missing, making it difficult to identify the activity during this time period. This could endanger overall safety. The demonstrated Kalman filter model estimates the value of the missing frame pixel-by-pixel using information from the frame that occurred in the video sequence before it and the frame that will occur in the video sequence after it. The results of the experiment provide evidence of the effectiveness of the algorithm.

• Journal of Engineering Education Research
• /
• v.25 no.6
• /
• pp.58-68
• /
• 2022

This paper aims to prepare basic design education materials explaining the design process of egg drop device by incorporating critico(-creative) thinking. To this end, in this paper, by utilizing the creative problem solving process and the elements and standards of critical thinking, 'the five-step creative engineering design education guidelines' have been prepared so that engineering freshmen can effectively participate in engineering design projects without major knowledge. We would like to apply them to the egg drop device design. The egg drop device design, which is experiment to make and drop a drop device that can protect an egg from breaking when it is dropped freely from high places, is an engineering design project that is widely used not only in elementary, middle and high school science events but also in engineering education courses under the name of 'stunt egg'. Perhaps the basic design education material on the egg drop device design incorporating critico(-creative) thinking in this paper will contribute to incorporating critico(-creative) thinking into engineering education, as well as to achieving the educational goals of the basic design subject.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.450-457
• /
• 2022

The construction industry is demanding, dynamic, and complex making it difficult for workers to recognize hazards. The nature of construction tasks exposes workers to several critical risk factors, such as a high rate of exertion and fatigue. Recent studies suggest that fatigue may impact hazard recognition in the construction industry. However, most studies rely on subjective measures when assessing the relationship between physical fatigue and hazard recognition, limiting such studies' efficacy. Thus, this study examined the relationship between physical fatigue and hazard recognition using a controlled experiment. Worker fatigue levels were captured using physiological data and a subjective exertion scale. The findings confirmed that physical exertion plays a significant role in hazard recognition skills (p < 0.05). This research contributes to theory and practice by providing a process for objectively assessing the influence of physical fatigue on worker safety and providing construction professionals with some critical insight needed to improve workplace safety.

• Korean Journal of Cognitive Science
• /
• v.17 no.2
• /
• pp.75-102
• /
• 2006

Three experiments were conducted using a verification task to examine good and poor readers' generation of causal inferences(with because sentences) and contrastive inferences(with although sentences). The unfamiliar, critical verification statement was either explicitly mentioned or was implied. In Experiment 1, both good and poor readers responded accurately to the critical statement, suggesting that both groups had the linguistic knowledge necessary to the required inferences. Differences were found, however, in the groups' verification latencies. Poor, but not good, readers responded faster to explicit than to implicit verification statements for both because and although sentences. In Experiment 2, poor readers were induced to generate causal inferences for the because experimental sentences by including fillers that were apparently counterfactual unless a causal inference was made. In Experiment 3, poor readers were induced to generate contrastive inferences for the although sentences by including fillers that could only be resolved by making a contrastive inference. Verification latencies for the critical statements showed that poor readers made causal inferences in Experiment 2 and contrastive inferences in Experiment 3 doting comprehension. These results were discussed in terms of context effect: Specific encoding operations performed on anomaly backgrounded in another passage would form part of the context that guides the ongoing activity in processing potentially relevant subsequent text.

• Transactions of Materials Processing
• /
• v.7 no.1
• /
• pp.81-93
• /
• 1998

Identification of forming limits of sheet metals is an important task to be done before the sheet metal forming processes. The information of the forming limit is indispensable for design of deformed shapes and related forming processes. This procedure becomes more important than ever as the auto-body becomes complicated and the number of auto-body parts is reduced for lower production cost. To identify the forming limit of sheet metals stretching with a hemispherical punch has gained popularity because of the convenient experimental procedure. The stretching experiment however has localized deformation or the shear band is originated from the non-unifrom deformation in the critical circum-stance instead of the absolute criterion. More accurate information of the forming limit therefore could be obtained by a more appropriate experiment to the real process. In this papaer an experiment program is devised to practivally identify the forming limits of sheet metals for auto-body parts. The experiment program contains not only stretching but deep-drawing Both forming experiments use the same hemispherical punch while they use different specimens. Deep-drawing experiments use speci-mens cut out in circular arc on both sides of circular blank to make it torn during the deep-drawing They also use speciments cut out straight in one side of a circular blank to make it deformed unevenly which causes local deformation during the deep-drawing. The experimental result demonstrates that the forming limit diagrams in the two cases show difference in their effective magnitude. The forming limit curve from deep-drawing is located lower than that from stretching. It is noted from the result that the deep-drawing process causes acceleration of localized deformation in comparison with the stretching process. From the experimental result the maximum value of forming limit could be pre-dicted for safe design.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.29 no.1
• /
• pp.173-179
• /
• 2005

In succession to previous study(A Study on the Limit of Anchor Dragging for Ship at Anchor sim I), the experiment of anchor dragging by ship handling simulator was performed to investigate the anchoring stability of ship at anchor in this study. The purpose of this experiment is to check the behavior charateristics of ship being dragged and the limit of anchor dragging for ship at anchor. A small tanker ship, which had been anchored in Jinhae Bay when the typhoon MAEMI passed on September 2003, was chosen as model ship for the experiment of anchor dragging and the result of experiment was confirmed to be very similar to the result of theoretical review and field report.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.11
• /
• pp.5566-5571
• /
• 2012

Block shear failure is one of limit states, and demands great caution in designing the tension member or connection joint of steel structures. From many studies and design specification, it is shown that the effect of the bolted connection type on the block shear failure was not considered. In order to investigate the effect of the bolted connection type(bearing type connection and slip critical connection) on the mode/strength of the block shear failure, tensile experiment is conducted in this study. Differences about the failure mode according to the design specification, bearing type connection, and slip critical connection are proposed from the analysis of test results. The variation of the block shear failure strength due to the frictional force in the slip critical connection is also investigated.

• Journal of Fisheries and Marine Sciences Education
• /
• v.12 no.2
• /
• pp.191-198
• /
• 2000

An experiment was carried out to obtain the fundamental data on the auditory thresholds of fishes for catching method using audible frequency sound, the auditory thresholds of dusky spinefoot Siganus fuscescens(Houttuyn) were measured in the presence of masking noise in the spectrum level range of 74 - 83dB re $1{\mu}Pa/{\sqrt{Hz}}$ by heartbeat conditioning technique using pure tones coupled with a delayed electric shock. The auditory critical ratios were about 23 - 34dB at measurement frequency range. The ratio increased almost linearly with increasing frequency from 200 to 500Hz. The noise spectrum level at the start of masking was about 61 - 73dB within the measurement frequency range. This suggests that hearing of dusky spinefoot is masked in the natural environment with the noise spectrum level above 70dB. The sound pressure level of which the signal sound of 100Hz is recognized by dusky spinefoot under the white noise of 70dB is above 98dB and the critical ratio of them is above 23dB.