• Computers and Concrete
• /
• 제25권4호
• /
• pp.311-325
• /
• 2020

In this research work, the hygrothermal and mechanical buckling responses of simply supported FG sandwich plate seated on Winkler-Pasternak elastic foundation are investigated using a novel shear deformation theory. The current model take into consideration the shear deformation effects and ensures the zero shear stresses on the free surfaces of the FG-sandwich plate without requiring the correction factors "Ks". The material properties of the faces sheets of the FG-sandwich plate are assumed varies as power law function "P-FGM" and the core is isotropic (purely ceramic). From the virtual work principle, the stability equations are deduced and resolved via Navier model. The hygrothermal effects are considered varies as a nonlinear, linear and uniform distribution across the thickness of the FG-sandwich plate. To check and confirm the accuracy of the current model, a several comparison has been made with other models found in the literature. The effects the temperature, moisture concentration, parameters of elastic foundation, side-to-thickness ratio, aspect ratio and the inhomogeneity parameter on the critical buckling of FG sandwich plates are also investigated.

• 한국초전도ㆍ저온공학회논문지
• /
• 제9권1호
• /
• pp.5-8
• /
• 2007

We have investigated the superconducting properties and surface morphology of $Sm_xBa_yCu_3O_{6+z}$ thin films deposited on LMO/IBAD-MgO/Hastelloy which prepared with different composition ratio by co-evaporation method(EDDC, Evaporation using Drum in Dual Chambers). We observed the composition ratio of SmBCO thin films by EDS analysis. We fabricated SmBCO thin film with critical current density of $1.5{\times}10^6A/cm^2$ at composition ratio of SM:Ba:Cu=1.10:2.01:3(at 77 K self-field). And, we confirmed that substitution of Sm-Ba did not occur at Cu rich phase by EDS analysis.

• 한국산학기술학회논문지
• /
• 제17권5호
• /
• pp.717-722
• /
• 2016

본 논문은 고장발생 초기 고장전류의 크기에 따라 피크전류제한 기능을 갖도록 하나의 철심에 기존 1차 코일과 2차 코일이 병렬로 연결된 초전도 소자 1과 추가적인 철심을 사용하여 3차 권선에 초전도 소자 2가 연결된 자기결합형 초전도한류기를 제안하였다. 이중 철심을 이용하여 코일 1과 코일 2간 병렬로 연결한 자기결합형 초전도한류기가 고장발생시 피크전류를 초전도 소자 1만이 분담하는 것을 확인할 수 있었다. 그 이유는 초기 사고전류의 순간적인 요소가 커서 초전도 소자 1이 ?치되어 작동하였으나, 코일 3에 흐르는 전류가 임계전류를 초과하지 않았고, 이로 인해 초전도 소자 2가 ?치되어 작동하지 않았기 때문이다. 사고 시 피크전류를 순차적인 초전도 소자로 제한하기 위해서는 코일 1이 낮은 자기인덕턴스 값을 갖고 있으면서도 코일 2보다 코일 3이 보다 높은 자기인덕턴스 값을 갖도록 설계해야 할 것이다. 또한, 고장 발생 초기 사고전류의 크기를 결정하는 고장조건 중의 하나인 1차 코일과 2차 코일간의 권선비가 0.25일 때 두 SFCL의 전류제한 및 회복특성에 대한 검증을 선로단락실험을 통해 분석되었다. 이 단락실험의 분석결과, 가극결선인 경우가 감극결선한 경우보다도 전류제한 및 회복특성이 더욱 우수함을 확인할 수 있었다.

• 대한지역사회영양학회지
• /
• 제10권6호
• /
• pp.905-919
• /
• 2005

This study raised the necessity of developing performance indicators for measuring the management efficiency and effectiveness of school food service, and as a means of helping its implementation, a balanced score card (BSC) approach developed by Norton and Kaplan was adopted. This study established BSC in seven phases through literature: Phase 1 Defining a school food service and the scope of working activities, Phase 2 Establishing the vision of a school food service, Phase 3 Setting strategic goals, Phase 4 Identifying critical success factors (CSFs), Phase 5 Developing Key Performance Indicators (KPIs), Phase 6 Extracting cause and effect relationship, and Phase 7 Completing a preliminary BSC. The preliminary BSC was fumed into a survey, which was administered to food service related people working at the Office of Education and School Food Service including 16 offices,209 dietitians, 48 school administrators both from self-operated and contract-managed, and 9 experts in areas related to school food service. They were asked questions about strategies from 4 different perspectives,12 CSFs, 39 KPls, and the cause and effect relationships among them. As a result, among the CSFs based on 4 different perspectives, all factors other than ' zero sum on profit/loss ' from the financial perspective turned out to be valid. In terms of KPIs, manufacturing cost percentages, casualty loss count/reduction rates, school foodervice participation rates, and sales goal achievement rates were found to be valid from the financial perspective, while student satisfaction index, faculty satisfaction index, leftover ratio, nutrition educational performance count, index of evaluating nutrition education, customer claim count/reduction rate, handling customer claim count/reduction rate, and parent satisfaction index were found to be valid from the customers' perspective. Besides, nutritional requirement sufficient ratio, nutritional management score, food poisoning outbreak count, employee safety accident count, sanitary inspection assessment index, meals per labor hour (productivity index), computerization ratio, operational management index, and purchase management assessment index were also found to be valid from the perspective of internal business processes. From the perspective of innovation and learning, employee turnover ratio/rate of absenteeism, annual education and training count, employee satisfaction index, human resource management assessment index, annual menu-related customer feedback, food service information index for employees and parents/schools were also found to be valid. The significance of this study is to present indices for measuring overall performance of school lunch food service operations without putting any limitation on types of school food service management, and to help correctly assess the contribution of the current types of school food service management to schools and students. (Korean J Community Nutrition 10(6) : $905\∼919$, 2005)

• 한국산학기술학회논문지
• /
• 제16권9호
• /
• pp.5810-5818
• /
• 2015

본 연구는 기업 가치 분석을 위한 최적 변수를 선정하고, 이 변수를 사용하여 기업의 가치를 분석하였다. 본 연구의 결과는 2가지로 구분할 수 있다. 첫째, 변수 선정을 위해 선행연구에서 사용한 기업가치 분석방법 및 변수를 고찰하였다. 이를 토대로 AHP 기법을 사용하여 8개의 변수를 도출하였다. 추가로 투자 전문가들이 사용한 변수 중 공통분모를 추출하였다. 최종적으로 도출한 변수는 배당수익률, PER, PBR, PCR, EV/EBITDA, ROE, 순이익 증가율, 매출성장률, 순유동자산, 부채비율, 유동비율, 재고자산회전율, 매출채권회전율, 종사자 1인당 순이익, 영업이익률, 매출액 순이익률, 총자본 순이익률, EPS 성장률의 18개 수정 변수를 도출했다. 둘째, 선정된 변수를 사용하여 기업 가치를 예측하였다. 예측을 위해 8개의 변수를 사용하여 로지스틱 회귀분석을 수행한 결과, 59.67%의 정확도를 나타내 8개의 변수는 적절하지 않음을 알 수 있었다. 이어서 18개의 변수를 사용하여 분석한 결과 91.98%의 정확도를 나타내 기업의 가치를 분석하기 위해서는 18개의 변수를 사용하는 것이 바람직하다는 것을 알 수 있었다.

• Geomechanics and Engineering
• /
• 제16권4호
• /
• pp.435-448
• /
• 2018

In order to make reliable earthquake-resistant design of civil engineering structures, one of the most important considerations in a region with high seismicity is to pay attention to the local soil condition of regions. It is aimed in the current study at specifying dynamic soil characteristics of Kirikkale city center conducting the 1-D equivalent linear and non-linear site response analyses. Due to high vulnerability and seismicity of the city center of Kirikkale surrounded by active many faults, such as the North Anatolian Fault (NAF), the city of Kirikkale is classified as highly earthquake-prone city. The first effort to determine critical site response parameter is to perform the seismic hazard analyses of the region through the earthquake record catalogues. The moment magnitude of the city center is obtained as $M_w=7.0$ according to the recorded probability of exceedance of 10% in the last 50 years. Using the data from site tests, the 1-D equivalent linear (EL) and nonlinear site response analyses (NL) are performed with respect to the shear modulus reduction and damping ratio models proposed in literature. The important engineering parameters of the amplification ratio, predominant site period, peak ground acceleration (PGA) and spectral acceleration values are predicted. Except for the periods between the period of T=0.2-1.0 s, the results from the NL are obtained to be similar to the EL results. Lower spectral acceleration values are estimated in the locations of the city where the higher amplification ratio is attained or vice-versa. Construction of high-rise buildings with modal periods higher than T=1.0 s are obtained to be suitable for the city of Kirikkale. The buildings at the city center are recommended to be assessed with street survey rapid structural evaluation methods so as to mitigate seismic damages. The obtained contour maps in this study are estimated to be effective for visually characterizing the city in terms of the considered parameters.

• 한국해양공학회지
• /
• 제18권5호
• /
• pp.43-49
• /
• 2004

The lightness of components required in the automobile and machine industry necessitates the use of high strength components. In particular, the fatigue failure phenomena, which occurs when using metal, increases the danger to human life and property. Therefore, antifatigue failure technology is an integral part of current industries. Currently, the shot peening is used for removing the defect from the surface of steel, while improving the fatigue strength on surface. Therefore, in this paper, the effect of compressive residual stress of spring steel(JISG SUP-9) by shot-peening on fatigue crack growth characteristics in a stress ratio(R=0.1, R=0.3, R=0.6) was investigated, giving consideration to fracture mechanics. By using the methods mentioned above, following conclusions are drawn: (1) The fatigue crack growth rate(da/dN) of the shot-peening material was lower than that of the un-peening material and in stage I, ΔKth, the threshold stress intensity factor of the shot-peen processed material is high in critical parts, unlike the un-peening material. Also m, fatigue crack growth exponent and number of cycle of the shot-peening material, was higher than that of the un-peening material, as concluded from effect of da/dN. (2) Fatigue life shows more improvement in the shot-peening material than in the un-peening material, and the compressive residual stress of surface on the shot-peen processed operate resistance of fatigue crack propagation.

• Advances in nano research
• /
• 제16권5호
• /
• pp.473-487
• /
• 2024

The current study employs the nonlocal Timoshenko beam (NTB) theory and von-Kármán's geometric nonlinearity to develop a non-classic beam model for evaluating the nonlinear free vibration of bi-directional functionally-graded (BFG) nanobeams. In order to avoid the stretching-bending coupling in the equations of motion, the problem is formulated based on the physical middle surface. The governing equations of motion and the relevant boundary conditions have been determined using Hamilton's principle, followed by discretization using the differential quadrature method (DQM). To determine the frequencies of nonlinear vibrations in the BFG nanobeams, a direct iterative algorithm is used for solving the discretized underlying equations. The model verification is conducted by making a comparison between the obtained results and benchmark results reported in prior studies. In the present work, the effects of amplitude ratio, nanobeam length, material distribution, nonlocality, and boundary conditions are examined on the nonlinear frequency of BFG nanobeams through a parametric study. As a main result, it is observed that the nonlinear vibration frequencies are greater than the linear vibration frequencies for the same amplitude of the nonlinear oscillator. The study finds that the difference between the dimensionless linear frequency and the nonlinear frequency is smaller for CC nanobeams compared to SS nanobeams, particularly within the α range of 0 to 1.5, where the impact of geometric nonlinearity on CC nanobeams can be disregarded. Furthermore, the nonlinear frequency ratio exhibits an increasing trend as the parameter µ is incremented, with a diminishing dependency on nanobeam length (L). Additionally, it is established that as the nanobeam length increases, a critical point is reached at which a sharp rise in the nonlinear frequency ratio occurs, particularly within the nanobeam length range of 10 nm to 30 nm. These findings collectively contribute to a comprehensive understanding of the nonlinear vibration behavior of BFG nanobeams in relation to various parameters.

• Progress in Superconductivity
• /
• 제13권2호
• /
• pp.111-116
• /
• 2011

Since superconducting wires have no resistance, electromagnets based on the superconducting wires produce no resistive heating with DC current as long as the current does not exceed the critical current of the wire. However, unlike resistive wires, superconducting wires exhibit AC heat loss. Embedding fine superconducting filaments inside copper matrix can reduce this AC loss to an acceptable level and opens the way to AC-capable superconducting coils. Here, we introduce an easy and accurate method to measure AC heat loss from sample superconducting coils by measuring changes in the rate of gas helium outflow from the liquid helium dewar in which the sample coil is placed. This method provides accurate information on total heat loss of a superconducting coil without any size limit, as long as the coil can fit inside the liquid helium dewar. With this method, we have evaluated AC heat loss of two superconducting solenoids, a 180-turn solid NbTi wire with 0.127 mm diameter (NbTi coil) and a 100-turn filamented wire with 1.4 mm diameter where 7 NbTi filaments were embedded in a copper matrix with copper to NbTi ratio of 6.7:1 (NbTi-Cu coil). Both coils were wound on 15 mm-diameter G-10 epoxy tubes. The AC heat losses of the NbTi and NbTi-Cu coils were evaluated as $53{\pm}4.7\;{\mu}W/A^2Hzcm^3$ and $0.67{\pm}0.16\;{\mu}W/A^2Hzcm^3$, respectively.

• 한국자기학회지
• /
• 제15권2호
• /
• pp.61-66
• /
• 2005

서브 마이크론 크기의 셀을 제조하기 위하여 종래의 방식인 전체시료구조를 증착한 후 이온밀링 방식으로 제조하는 대신에 Pt 스텐실 마스크 공정과 e-beam 리소 및 습식 식각 공정을 이용하여 배치형 submicron 셀을 lift-off 방식으로 제조하였다. $500nm{\times}500 nm,\;200nm{\times}300 nm$ 크기에 $CoFe(30 {\AA})/Cu(100{\AA})/CoFe(120{\AA}$) 3층 구조를 셀내에 증착하고 수직전류를 인가하여 자기저항 특성을 조사하였다. 자기저항 특성은 두 자성층의 보자력 차이를 이용하여 스핀의 반평형 구조를 유도하여 슈도 스핀밸브이며 각 셀의 크기에서 1.1, $0.8{\%}$의 자기저항비가 얻어졌다. 또한 전류인가에 따른 저항변화로부터 스핀전달 효과에 따른 스위칭 변화가 일어남을 확인하였으며, 이 구조에서 저항의 변화로부터 측정된 임계전류밀도는 약 $7.65{\times}10^{7}A/cm^2$였다.