• 대한치과기공학회지
• /
• 제18권1호
• /
• pp.5-13
• /
• 1996

Among investment for dental casting, we selected 4 kinds of investment(2 Gypsum-bonded and 2 Phosphate-bonded) and prepard 120 specimen by dividing into two cast of using Ring and Ringless case from $0^{\circ}C$ to $30^{\circ}C$ at interval of $10^{\circ}C$ to invest in fluence on the fitness of casting body according to the liquid temperature of Gypsum-bonded and Phosphate-bonded investment. The result was as follows; 1. Gypsum-bonded investment showed best fitness at $30^{\circ}C$ representing difference of singnificance in order of $20^{\circ}C$, $10^{\circ}C$, and $0^{\circ}C$, From the difference of investment, Deguvest was proved superior than Cristobalite. 2. Phosphate-bonded investment showed no severe difference at $10^{\circ}C$ and $20^{\circ}C$, but showed better fitness at $10^{\circ}C$, representing difference of significance in order of $0^{\circ}C$, $30^{\circ}C$, difference of significance was shown between investment also. 3. In Ringless investing method, there were no difference of significance in Deguvest CF and Unovest. 4. When using a Ring with a Sheet of asbestos liner installed, there was some difference of significance representing superiority of Ringless investing method.

• 한국세라믹학회지
• /
• 제48권3호
• /
• pp.228-235
• /
• 2011

Sintering behavior and lightweight characteristics of porcelain by addition of FAHM (Fly-Ash Hollow Microsphere) were evaluated. Green body of Backja composition (general porcelain) in which FAHM was added(15 and 20 wt%) was made by slip casting method. The green body was sintered at 1270 and $1290^{\circ}C$ and maintained for 1h. The bulk density and linear shrinkage of the sintered body with FAHM (20 wt%) decreased. As the contents of FAHM. increased, mullite and cristobalite phases increased. In the microstructure, FAHM shells remained after sintering, and the generation of mullite fibers around FAHM shells also were confirmed. the weight of porcelain with of 20% FAHM decreased by 40% and residual FAHM shells promoted the mullite of generation in the matrix.

• 한국지구과학회지
• /
• 제29권7호
• /
• pp.531-538
• /
• 2008

경북 포항의 장기층군에서 산출된 규화목의 산출상태로부터 판단하면 규화목은 모두 이지성 화석임을 지시한다. 장기층군에는 규화목과 함께 탄화목, 목탄도 발견되며, 일부의 규화목에는 껍질부분에 갈탄화된 유기물이 일부 남아있는 것도 있다. 규화목의 X선 회절 분석으로부터 Opal-CT, Opal-C, 석영+크리스토발라이트의 3가지 유형이 확인되었다. 이러한 광물의 존재는 규화작용이 비교적 낮은 온도에서 일어났음을 지시한다. 실리카($SiO_2$)의 주공급원은 응회암으로 추정된다. 규화목의 구성광물의 종류와 조직 보존 상태로부터 판단하면 규화작용은 주로 치환에 의해 일어난 것으로 추정된다.

• Advances in concrete construction
• /
• 제11권1호
• /
• pp.73-80
• /
• 2021

Rice Husk Ash (RHA) geopolymer paste activated by sodium aluminate were characterized by X-ray diffractogram (XRD), scanning electron microscope (SEM), energy dispersion X-Ray analysis (EDAX)and fourier transform infrared spectroscopy (FTIR). Five series of RHA geopolymer specimens were prepared by varying the Si/Al ratio as 1.5, 2.0, 2.5, 3.0 and 3.5. The paper focuses on the correlation of microstructure with hardened state parameters like bulk density, apparent porosity, sorptivity, water absorption and compressive strength. XRD analysis peaks indicates quartz, cristobalite and gibbsite for raw RHA and new peaks corresponding to Zeolite A in geopolymer specimens. In general, SEM micrographs show interconnected pores and loosely packed geopolymer matrix except for specimens made with Si/Al of 2.0 which exhibited comparatively better matrix. Incorporation of Al from sodium aluminate were confirmed with the stretching and bending vibration of Si-O-Si and O-Si-O observations from the FTIR analysis of geopolymer specimen. The dense microstructure of SA2.0 correlate into better performance in terms of 28 days maximum compressive strength of 16.96 MPa and minimum for porosity, absorption and sorptivity among the specimens. However, due to the higher water demand to make the paste workable, the value of porosity, absorption and sorptivity were reportedly higher as compared with other geopolymer systems. Correlation regression equations were proposed to validate the interrelation between physical parameters and mechanical strength. RHA geopolymer shows comparatively lower compressive strength as compared to Fly ash geopolymer.

• 한국재료학회지
• /
• 제22권12호
• /
• pp.701-705
• /
• 2012

The effects of clay, aluminum hydroxide, and carbon powder on the sintering of a Si/SiC mixture from photovoltaic silicon-wafer production were investigated. Sintering temperature was fixed at $1,350^{\circ}C$ and the sintered bodies were characterized by SEM and XRD to analyze the microstructure and to measure the apparent porosity, absorptivity, and apparent density. The XRD peak intensity of SiC in the sintered body was increased by adding 5% carbon to the Si/SiC mixture. From this result, it is confirmed that Si in the Si/SiC mixture had reacted with the added carbon. Addition of aluminum hydroxide decreased the cristobalite phase and increased the stable mullite phase. The measurement of the physical properties indicates that adding carbon to the Si/SiC mixture enables us to obtain a dense sintered body that has high apparent density and low absorptivity. The sintered body produced from the Si/SiC mixture with aluminum hydroxide and carbon powder as sintering additives can be applied to diesel particulate filters or to heat storage materials, etc., since it possesses high thermal conductivity, and anticorrosion and antioxidation properties.

• 한국전기전자재료학회논문지
• /
• 제33권1호
• /
• pp.50-55
• /
• 2020

Porcelain insulators have been used for a long time in 154 kV power transmission lines. They are likely to be exposed to sudden failure because of product deterioration. This study was conducted to evaluate the quality of porcelain insulators. After stresses were applied, the damaged regions of aged insulators were investigated in terms of chemical composition, material structure, and other properties. For porcelain insulators that were in service for a long time, the mechanical failure load was 126 kN, whereas the average mechanical failure load was 167.3 kN for new products. It was also determined that corrosion occurred at the metal pin part due to the penetration of moisture into the gap between the pin and the ceramic. Statistical analyses of failure were performed to identify the portion of the insulators that were broken. Cristobalite porcelain insulators fabricated without alumina additives had a high failure rate of 54% for the porcelain component. In the case of the addition of Alumina (Al₂O₃) to the porcelain insulators to improve the strength of the ceramic component, a more frequent damage rate of the cap and pin of 73.3% and 27%, respectively, was observed. This study reports on the material component of SiO₂ and the percentage of alumina added, with respect to the mechanical properties of porcelain insulators.

• 보존과학회지
• /
• 제35권4호
• /
• pp.317-329
• /
• 2019

Slag was collected from the iron-producing furnace site in Saengsoegol, Baegun mountain, where iron was manufactured by a righteous army against Japan in the Gwangyang region; then, the iron-manufacturing technique of the early modern period was investigated through scientific analysis. In the microstructure analysis results of the selected samples, iron bloom was mainly observed together with magnetite and fayalite. In the component analysis results of the compounds, it was confirmed that the furnace was built by using gangue of alkali feldspar or plagioclase series, and the ironmaking work was performed at a high temperature of at least 1050℃, because mullite was identified together with cristobalite and hercynite. Based on the chemical composition, it was speculated that low-grade iron ores were used as raw materials, and it seemed that the yield was low, because the total Fe content of the smelting slag samples was 37.72-49.93%. It was difficult to confirm whether a slag former was used, and it seemed that materials easily obtained nearby were used when the furnace was built, without considering the corrosion resistance. It appeared that the ironmaking work was performed at the Gwangyang Saengsoegol iron-producing furnace based on the direct ironmaking method in an environment that could escape the vigilance of the Japanese Empire to produce weapons that would be used for the resistance against Japan. It seemed that there was neither an advanced ironware production system nor a mass production system, and small-scale works were performed in short periods of time.

• 한국환경보건학회지
• /
• 제35권2호
• /
• pp.130-142
• /
• 2009

This study compared FTIR with XRD method for the analysis of quartz by % recovery, coefficient of variation (CV) and influence of the interference. the results were as the following. 1. In FTIR method, the coefficient of determination ($r^2$) was 0.9998 in a calibration curve of $695\;cm^{-1}$, and the limit of detection was $4.9{\mu}g/sample$. 2. The highest recovery was $799\;cm^{-1}$ (98.2%). 3. The CVpooled of the FTIR method was approximately 10% in three wave numbers. 4. The analysis of qualitative and quantitative for quartz is difficult with mixed cristobalite and iron oxide. 5. In XRD method with rotating sample holder and LynxEye detector, the coefficient of determination was 0.9996 in a calibration curve, and the limit of detection was $5.9{\mu}g/sample$. 6. The recovery and CV pooled were 104.3%, and 11 %, respectively. 7. In muffle furnace ashing, the quartz weight decreased to 34% when the maximum weight of the iron oxide was more than eight times. In conclusion, the accuracy (% recovery) and precision (CV) of FTIR and XRD method for analyzing $\alpha$-quartz were similar. FTIR method was a disadvantage for sample matrix because it indicates possibility of interference. However, XRD method distinguished specific crystalline forms of silica, and the majority of silicate minerals. In addition, XRD method recommend filter dissolution to pretreatment method.

• 고문화
• /
• 60호
• /
• pp.101-120
• /
• 2002

고대건축에 있어 중요부재로 사용되었던 전돌은 의장이 화려하고 섬세하여 통일신라시대에는 당${\cdot}$일본의 수준을 훨씬 능가하였다. 이 중 녹유전은 그 사용례가 특별한 건축물에 한정하여 사용하였으며 남겨진 자료 또한 소량일 뿐만 아니라, 현재까계 녹유전과 관련된 연구는 거의 이루어지지 않고 있어 분석을 시도하여 보았다. 조사된 녹유전은 통일신라시대의 가장 대표적인 포항 법광사지 출토 녹유전이다. 녹유전의 성분분석은 미소부X선회절분석기, 유도결합플라르마발광분석기, 미소부형광X선분석기, 열중량/시차별분석기/열이온화질량분석기의 방법으로 이루어졌다. 현미경관찰 결과, 단면구조는 대부분이 석영, 장석이며 주변에서 쉽게 관찰할 수 있는 보통의 점토입자로 구성되어 있었다. 태토의 성분 분석예는 거의 없음으로 기존에 조사 발표된 경주 및 장도 출토 토기와 비교하여 시 Al2O3와 Fe2O3가 조금 낮고 SiO2 성분이 더 높게 분석되었다. 또한 녹유의 성분분석 결과, PbO $70.2wt\%$를 함유한 순수한 납 유리질이었다. 전돌의 소성온도는 TG/DTA를 통해 $573^{\circ}C$에서의 흡열피크$(\alpha-quartz\rightarrow\beta-quartz)$와 $870^{\circ}C$에서 석영의 상전이$(\beta-quartz{\rightarrow}tridymite)$에 따른 발열피크가 관찰되었다. 이는 $900^{\circ}C$ 이전에는 특이한 열적 변화가 없고 이 온도 범위 이상에서 변화가 일어났다는 것을 의미하므로 $900^{\circ}C$ 이하에서 소성된 것이라 사료된다. XRD를 이용한 광물분석에서는 전형적인 점토광물인 quartz와 feldspar, muscovite peak가 동정되고, 고온 소성시 보여지는 tridymite, mullite와 cristobalite peak가 동정되지 않은 것으로 석영의 결정구조 변화에 따른 소성온도 추정으로 보아 $900^{\circ}C$ 이하의 저온소성으로 볼 수 있다. 전돌 녹유의 납동위원소비 분석결과는 한국중남-남부광산연과 일치하고 있으며, 따라서 포항 법광사지의 녹유전돌의 제작산지는 한반도 남부의 원료를 사용하여 제작했음을 추정할 수 있다.

• 한국세라믹학회지
• /
• 제45권10호
• /
• pp.644-650
• /
• 2008

It has been proposed that the Cao-$SiO_2$ binary system can be good basic composition of bioactive glasses and glass-ceramics. In the present study, various kinds of Cao-$SiO_2$ gels were prepared by sol-gel method in order to control the microstructure which are related to their dissolution rate, induction period of apatite formation in body environment. Characterization of the gels were done by wet chemical analysis, SEM observation, FT-IR spectroscopy and XRD. The gelation time decreased with CaO content. However, the volume of all the dried gel decreased to 50% of the wet gels irrespective of increasement of CaO content. All the Cao-$SiO_2$ gels were amorphous and contained a large amount of silanol groups on their surfaces after heat treatment up to $800^{\circ}C$. The interconnected structure of the gel changed to agglomerated spherical powders when Ca content exceed to 20 mol%. Most of the Cao-$SiO_2$ gel showed amorphous when heat-treated up to $900^{\circ}C$. However, quartz and cristobalite was produced when heat-treated at $1000^{\circ}C$ and resultant microstructure of the gel contained microporous structure.