Browse > Article
http://dx.doi.org/10.4313/JKEM.2020.33.1.50

Determination of Deterioration and Damage of Porcelain Insulators in Power Transmission Line Through Mechanical Analysis  

Son, Ju-Am (College of Information and Communication Engineering, Sungkyunkwan University)
Choi, In-Hyuk (Korea Elctric Power Corporation (KEPCO) Research Institute)
Koo, Ja-Bin (Korea Elctric Power Corporation (KEPCO) Research Institute)
Kim, Taeyong (College of Information and Communication Engineering, Sungkyunkwan University)
Jeon, Seongho (College of Information and Communication Engineering, Sungkyunkwan University)
Lee, Youn-Jung (College of Information and Communication Engineering, Sungkyunkwan University)
Yi, Junsin (College of Information and Communication Engineering, Sungkyunkwan University)
Publication Information
Journal of the Korean Institute of Electrical and Electronic Material Engineers / v.33, no.1, 2020 , pp. 50-55 More about this Journal
Abstract
Porcelain insulators have been used for a long time in 154 kV power transmission lines. They are likely to be exposed to sudden failure because of product deterioration. This study was conducted to evaluate the quality of porcelain insulators. After stresses were applied, the damaged regions of aged insulators were investigated in terms of chemical composition, material structure, and other properties. For porcelain insulators that were in service for a long time, the mechanical failure load was 126 kN, whereas the average mechanical failure load was 167.3 kN for new products. It was also determined that corrosion occurred at the metal pin part due to the penetration of moisture into the gap between the pin and the ceramic. Statistical analyses of failure were performed to identify the portion of the insulators that were broken. Cristobalite porcelain insulators fabricated without alumina additives had a high failure rate of 54% for the porcelain component. In the case of the addition of Alumina (Al2O3) to the porcelain insulators to improve the strength of the ceramic component, a more frequent damage rate of the cap and pin of 73.3% and 27%, respectively, was observed. This study reports on the material component of SiO2 and the percentage of alumina added, with respect to the mechanical properties of porcelain insulators.
Keywords
Mechanical characteristic; Electromechanical failing load; Transmission line; Porcelain insulator;
Citations & Related Records
연도 인용수 순위
  • Reference
1 A. Rawat and R. S. Gorur, IEEE Trans. Dielectr. Electr. Insul., 16, 107 (2009). [DOI: https://doi.org/10.1109/TDEI.2009.4784557]   DOI
2 Z. Guan, X. Wang, X. Bian, L. Wang, and Z. Jia, Proc. 2014 IEEE Electrical Insulation Conference (EIC) (IEEE, Philadelphia, USA, 2014) p. 227-230. [DOI: https://doi.org/10.1109/EIC.2014.6869381]
3 S. Multon and F. Toutlemonde, Cem. Concr. Res., 36, 912 (2006). [DOI: https://doi.org/10.1016/j.cemconres.2005.11.012]   DOI
4 H. Olafsson, Proc. 7th Int. Conf. On Alkali Aggregate Reaction in Concrete (1986) p. 461-465.
5 C. Larive, Paris Tech. Institut Des Sciences Et Technologies Paris Institute of Technology (1997). [Tel-00520676] https://pastel.archives-ouvertes.fr/tel-00520676/
6 S. Multon and F. Toutlemonde, Cem. Concr. Res., 40, 924 (2010). [DOI: https://doi.org/10.1016/j.cemconres.2010.01.011]   DOI
7 I. P. Swainson and M. T. Dove, Phys. Chem. Miner., 22, 61 (1995). [DOI: https://doi.org/10.1007/bf00202681]   DOI
8 C. E. Brackbill, H. A. Mckinstry, and F. A. Hummel, Am. Ceram. Soc., 34, 107 (1951). [DOI: https://doi.org/10.1111/j.1151-2916.1951.tb11616.x]   DOI
9 E. Demirkesen, Z. E. Erkmen, and N. Yildiz, J. Am. Ceram. Soc., 82, 3619 (1999). [DOI: https://doi.org/10.1111/j.1151-2916.1999.tb02289.x]   DOI
10 I. A. Aksay, J. A. Pask, and R. F. Davis, J. Am. Ceram. Soc., 62, 332 (1979). [DOI: https://doi.org/10.1111/j.1151-2916.1979.tb19071.x]   DOI
11 P. Ramaswamy, S. Vynatheya, and S. Seetharamu, Proc. the 2004 IEEE International Conference on Solid Dielectrics, 2004. ICSD 2004 (IEEE, Toulouse, France, 2004) p. 423. [DOI: https://doi.org/10.1109/ICSD.2004.1350381]
12 J. M. Amigo, F. J. Serrano, M. A. Kojdecki, J. Bastida, V. Esteve, M. M. Reventos, and F. Marti, J. Eur. Ceram. Soc., 25, 1479 (2005). [DOI: https://doi.org/10.1016/j.jeurceramsoc. 2004.05.019]   DOI
13 N. S. Mehta, P. K. Sahu, P. Tripathi, R. Pyare, and M. R. Majhi, Bol. Soc. Esp. Ceram. Vidrio, 57, 151 (2018). [DOI: https://doi.org/10.1016/j.bsecv.2017.11.002]   DOI
14 P. Krupa and S. Malinaric, Ceram. Int., 41, 3254 (2015). [DOI: https://doi.org/10.1016/j.ceramint.2014.11.015]   DOI
15 F. Aumento, Am. Mineral., 51, 1167 (1966).
16 History of Korea Electric Power Corporation (K.E.P.C.O), http://home.kepco.co.kr/kepco/KE/B/htmlView/KEBAHP00307.do?menuCd=FN01010103 (2019).
17 Korea Institute for International Economic Policy, MOEF OECD Economic Surveys: Korea (2012).