• International Journal of Aeronautical and Space Sciences
• /
• 제13권4호
• /
• pp.458-467
• /
• 2012

In this study, the linear viscoelastic response of a rectangular laminated plate is investigated. The viscoelastic properties, expressed by two basic spring-dashpot models, that is Kelvin and Maxwell models, is assumed in the range to investigate the influence of viscoelastic coefficients to mechanical behavior. In the present study, viscoelastic responses are performed for two popular equivalent single-layered theories, such as the first-order shear deformation theory (FSDT) and third-order shear deformation theory (TSDT). Compliance and relaxation modulus of time-dependent viscoelastic behavior are approximately determined by Prony series. The constitutive equation for linear viscoelastic material as the Boltzmann superposition integral equation is simplified by the convolution theorem of Laplace transformation to avoid direct time integration as well as to improve both accuracy and computational efficiency. The viscoelastic responses of composite laminates in the real time domain are obtained by applying the inverse Laplace transformation. The numerical results of viscoelastic phenomena such as creep, cyclic creep and recovery creep are presented.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1050-1051
• /
• 2006

• 한국도로학회논문집
• /
• 제15권1호
• /
• pp.87-94
• /
• 2013

PURPOSES: To characterize the aging effect on asphalt binder, dynamic shear modulus mastercurve of two typical asphalt binders are developed. METHODS: To develop dynamic shear modulus mastercurve, dynamic shear modulus at high temperature and creep stiffness at low temperature are measured by temperature sweep test and bending beam rheometer test, respectively. RESULTS: It is observed that the aging effect on asphalt binder can be clearly observed from dynamic shear modulus mastercurve and the mastercurve can be utilized to predict behavior of asphalt binder at wide range of temperature. CONCLUSIONS: It is confirmed that SBS 5% modified binder has more desirable mechanical property at low and high temperature as a pavement material comparing to PG64-22 binder and the mastercurve is an effective tool to evaluate the property of asphalt binder.

• 한국지반공학회논문집
• /
• 제19권4호
• /
• pp.191-200
• /
• 2003

본 연구는 말뚝 부마찰력 저감용으로 사용하는 역청재료의 유변학적 특성을 분석한 결과이다. 역청재료는 효과적으로 부마찰력을 저감시키고 경제적인 장점으로 인하여 말뚝의 부마찰력 저감 공법으로 사용하여 왔다. 본 연구에서는 세 종류의 말뚝용 역청재료를 선택하여 비교 시험을 실시하였다. 물리적 특성시험으로는 침입도 시험, 연화점 시험 및 침입도 지수를 실시하였으며 유변학적 시험으로는 동적전단 유동기를 사용하여 위상각, 복합계수, 크리프시험 및 흐름시험을 시험온도 15, 30, 45 및 6$0^{\circ}C$에서 수행하였다. 시험 결과는 역청재료의 유변학적 특성을 나타내는 위상각, G$^*$/sin $\delta$, 크리프 컴플라이언스 및 전단점도로 분석하여 상호 비교하였다. 시험 결과 온도와 위상각은 비례관계를 나타냈으며 G$^*$/sin $\delta$는 반비례 관계를 보였다. 또한, 크리프 컴플라이언스는 하중시간이 증가함에 따라 증가하여 역청재료가 시간의 변화에 따라 점성유체로 작용하는 것으로 나타났다. 크리프시험으로 인한 시간 및 온도의 변화는 크리프 컴플라이언스 값을 크게 변화 시켰으나 전단점도의 변화는 그다지 심하게 나타나지 않아서 말뚝 역청재료의 평가에는 크리프 컴플라이언스를 측정 할 수 있는 크리프시험이 적절한 것으로 평가되었다. 본 연구에서 유변학적 시험을 실시한 결과 물리적 시험으로부터 분석할 수 없는 온도와 시간의 변화에 따른 역청재료의 특성변화를 상세하게 분석할 수 있었는데 이러한 시험 결과는 말뚝용 역청재료의 선정에 큰 영향을 미칠 것으로 판단된다.

• 한국농공학회지
• /
• 제44권6호
• /
• pp.115-123
• /
• 2002

This study was performed to provide basic data for development and construction of reinforced soil wall that mixed with reinforcements such as calcium carbonate, monofilament fiber. In order to determine proper moisture content and mixing ratio by weight of reinforcement, Poisson's ratio and compressive strength tests for sandy soil had been conducted. Model tests for long-term behavior of reinforced soil wall were carried out to investigate the effect of reinforcement during loads and under static loads. The results of creep and model tests for sandy soil compared with clayey soil. Reinforced sandy soil mixed with calcium carbonate and cement showed brittle rupture by shear but that of mixed with monofilament fiber showed ductile rupture due to the tension force of fiber. It was shown that when age increased, creep strain of reinforced soil under sustained load approached constant values.

• Steel and Composite Structures
• /
• 제3권2호
• /
• pp.111-122
• /
• 2003

The paper presents a model for analysing the shear-lag effect on the slab of twin-girder composite decks subjected to static actions, support settlements and concrete shrinkage, which are the main actions of interest in composite bridge design. The proposed model includes concrete creep behaviour and shear connection flexibility. The shear-lag in the slab is accounted for by means of a new warping function. The considered actions are then applied to a realistic bridge deck and their effects are discussed. The proposed method is utilised to determine the slab effective widths for three different width-length ratios of the deck. Finally, a comparison between the results obtained with the Eurocode EC4-2 and those obtained with the proposed model is performed.

• 한국구조물진단유지관리공학회 논문집
• /
• 제8권2호
• /
• pp.195-204
• /
• 2004

본 연구에서는 약액주입 사질고결토에 대해 일정재하크리프시험과 반복재하크리프시험을 실시하여 점 탄소성 거동 규명과 크리프예측을 수행하였다. 일정재하크리프 시험결과 총 변형률은 탄성, 소성 그리고 점탄성변형률로 구분되었으며 이러한 변형률은 응력의 증가에 비례하여 증가하였고 회복된 변형률은 제하시간에 무관함을 알았다. 일정재하크리프시험 예측결과 일반화된 모델과 지수함수모델은 시험결과와 잘 일치하였다. 반복재하크리프시험에서 순간회복변형률은 반복횟수에 무관하였고 누적소성 변형률은 반복횟수에 따라 증가하였으며 응력레벨에 비례함을 알 수 있었다. 반복재하크리프시험의 예측결과 첫 사이클에서는 잘 일치하였으나 반복횟수가 증가함에 따라 약간의 오차가 발생되었다.

• 비파괴검사학회지
• /
• 제19권2호
• /
• pp.110-117
• /
• 1999

크리프 손상을 단계적으로 받은 순수 구리 시편에 대하여 손상 진전에 따른 기공의 미시구조 변화를 관찰하고 초음파 속도와 주파수 의존 진폭 스펙트럼 및 감쇠를 측정하였다. 손상 진전에 따른 입계기공의 비등방적 성장으로 인하여 하중축에 대하여 세 방향으로 측정한 속도는 이방성 거동을 보였다. 최대 2%의 기공에 대하여 종파와 횡파는 각각 11%와 4%의 속도 감소를 보였으며, 기공량의 증가와 함께 비선형적인 감소 경향을 보였다. 진폭 스펙트럼은 기공량이 증가함에 따라 고주파수 성분이 감소하고 중심 주파수가 저주파수로 이동하였으며, 감쇠는 사용 주파수 범위에서 거의 선형적인 거동을 보였다. 기공량의 정량적 비파괴평가 파라미터로서 정규화 속도, 진폭 스펙트럼의 중심 주파수, 감쇠 기울기를 선정하였으며 기공량과의 상관관계를 제시하였다.

• KCI Concrete Journal
• /
• 제14권1호
• /
• pp.15-22
• /
• 2002

Stresses that develop due to differential shrinkage between polymer modified cement mortar (PM) and Portland cement concrete (PCC) in a repaired concrete beam at early ages were investigated. Interface delamination or debonding of the newly cast repair material from the base is often observed in the field when the drying shrinkage of the repair material is relatively large. This study presents results of both experimental and analytical works. In the experimental part of the study, development of the material properties such as compressive strength, elastic modulus, interface bond strength, creep constant, and drying shrinkage was investigated by testing cylinders and beams for a three-week period in a constant-temperature chamber. Development of shrinkage-induced strains in a PM-PCC composite beam was determined. In the analytical part of the study, two analytical solutions were used to compare the experimental results with the analytically predicted values. One analysis method was of an exact type but could not consider the effect of creep. The other analysis method was rather approximate in nature but the creep effect was included. Comparison between the analytical and the experimental results showed that both analytical procedures resulted in stresses that were in fair agreement with the experimentally determined values. It may be important to consider the creep effect to estimate shrinkage-induced stresses at early ages.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.197-202
• /
• 2001

It is necessary to Investigate long-term behavior of vertical members such as column and shear wall because the long-term behavior induces the serviceability problem of reinforce-concrete structures. However, the long-term behavior on shear wall has not been fully studied. Experimental works are performed to understand the time dependent behavior of shear wall, especially the effect of loading area in this research. Three different types of cross sections are adopted, i.e., 10$\times$10 cm, 10$\times$30 cm, and 10$\times$50 cm with the same loading area of 10$\times$10 cm. The creep strains were different from point to point in the section of the shear wall specimen because of the nonlinear stress distribution. The effect of the nonlinear stress distribution was larger in the specimen with the larger width.