• 한국축산식품학회지
• /
• 제26권1호
• /
• pp.37-42
• /
• 2006

이 연구는 어리장 형태와 계절이 출하환경 및 폐사율에 미치는 영향을 조사하여 출하 중 폐사에 의한 경제적 손실을 예방하고 관련 시설 개선을 위한 정책적 자료를 확보하기 위해 수행하였다. 관리실태는 출하관리환경이 다른 2계열 업체의 관리대장을 입수하여 1, 4, 8, 10월 첫째주 1주일분에 대해 적재중량, 수송밀도, 수송 및 계류시간, 폐사율 등을 분석하였다. 두 업체의 평균 적재중량, 수송시간, 계류시간 및 폐사율은 각각 3.9 톤, 96 분, 478 분 및 0.6%이었다. 상자형과 컨테이너형 어리장의 수송중 폐사율은 각각 0.5와 0.6%로 컨테이너형이 유의적(p<0.05)으로 높았으며 적재중량 및 수송밀도($cm^2/kg$)또한 컨테이너형이 상자형에 비해 많고 높았다. 출하계절별 폐사율은 봄, 겨울이 각각 0.7, 0.8%로 여름, 가을의 0.5%에 비해 유의적으로 높은 경향을 나타내었다. 어리장 형태와 출하계절에 따른 폐사율은 상자형의 경우 봄, 겨울이 각각 0.8, 0.7%로 여름, 가을의 0.3, 0.4%에 비해 높았다. 컨테이너형은 봄, 가을, 겨울의 폐사율이 각각 0.7, 0.5, 0.8%로 유의적인 차이를 보였으며 봄과 여름, 여름과 가을은 유의적인 차이를 보이지 않았다. 출하 후 육계의 폐사율은 컨테이너형, 상자형이 비슷하였으며 계절은 봄, 겨울이 여름, 가을에 비해 높았다. 이는 다른 계절에 비해 계류장에서의 대기시간이 길고 가온시설이 없어 동사한 닭이 많기 때문으로 사료되었다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제22권9호
• /
• pp.1328-1333
• /
• 2009

To evaluate different housing systems, 80 gilts were randomly allocated at puberty to four treatments: i) sow stall in gestation followed by farrowing crate (SC), ii) group housing with individual feeding in gestation followed by farrowing crate (GC), iii) ESF (Electronic Sow Feeding) system in gestation followed by farrowing crate (EC), and iv) ESF system followed by group farrowing pen (EG). The results showed that stalled sows had a longer interval between puberty and second estrus (p<0.001). The sows kept in the ESF system gained more body weight (p<0.01) and backfat (p<0.05) prior to service, and more backfat during gestation (p<0.05), but also had greater backfat losses in the subsequent lactation (p<0.01). Sows changing from loose housing to confinement at farrowing had longer gestation length (p<0.001). Total litter size did not differ significantly between gestation treatments, but the number of stillborn piglets was significantly higher in the SC treatment (p<0.01). After weaning, SC sows had the longest interval for rebreeding (p<0.001). Some EG sows came into heat before weaning, giving this treatment the shortest interval. These results indicate that gestation confinement in sow stalls had several detrimental effects on sow performance relative to group housing.

• 한국공작기계학회논문집
• /
• 제16권6호
• /
• pp.79-85
• /
• 2007

The modem industry age began when the conveyer system was introduced by Ford to produce model "T". The conveyer system is designed to optimize and maximize mass production of a specific item. Nowadays, however, accommodating to individual tastes has become an important factor in selection of products. Thus, rather than the mass production of one item, producing fewer but a wide variety of goods became important. To give flexibility and elasticity to the conveyer system, a new method of transportation where it is possible to choose a specific item is necessary. Therefore mall quantity and high-volume mass production was decrescent and small quantity batch production was expanded. In this paper, we developed multiple crate stacking and picking system to give flexibility to the conveyer system. First, we verified the conceptually designed system through manufacture. Second, we solved the problems that would happen on the actual field using pneumatic system. Finally, we optimized the system through FEM technique. This system works with stability and fast speed and can improve work efficiency which would minimize the losses resulting from too much dependence on manual labor.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.2047-2052
• /
• 2004

Inconel-600 alloy has been used as steam generator tube material for current pressurized water reactors (PWRs). The long-term operation of steam generators showed that the use of this material induced localized corrosion damages and increased tube wear of steam generator. To protect these problems, steam generator tube material is being changed to Inconel-690 alloy. Based on the current trend, we have chosen Inconel 690 as the Advanced Power Reactor 1400 (APR1400) steam generator(SG) tube material and performed the design optimization of preventive measure against tube fretting wear for the APR1400 steam generator. In this paper, we examined the technical consideration in this modification : the selection of material, wear characteristics, effect of the Egg-crate Flow Distribution Plate installation, and effect analysis of vertical strip installation.

• Asian-Australasian Journal of Animal Sciences
• /
• 제22권11호
• /
• pp.1574-1580
• /
• 2009

To evaluate the effect of different housing systems on sow behavior, 80 gilts were randomly allocated at puberty to four treatments: i) sow stall in gestation followed by farrowing crate (SC), ii) group housing with individual feeding in gestation followed by farrowing crate (GC), iii) ESF (Electronic Sow Feeding) system in gestation followed by farrowing crate (EC), and iv) ESF system followed by group farrowing pen (EG). Behavioral observations were carried out on a total of 16 animals per treatment at the following stages: first day of allocation to housing treatment, day of service, 80 days after service, 109 days after service on entry to farrowing accommodation, 24 h before farrowing, day of farrowing, 14, 27 and 28 days after farrowing, at weaning. On each occasion, individual animals were observed for a 24 period with one minute time sampling. There were significant differences (p<0.001) between stages of the reproductive cycle for all the behavior patterns in all treatments. On the first day in experimental housing treatments, sows spent more time rooting and dog-sitting. Activity and investigatory behavior decreased as pregnancy progressed. An activity peak was apparent just before farrowing, followed by a high level of inactivity on the day of farrowing. Time spent active, eating and drinking increased as lactation progressed, and greatest activity and locomotion was seen immediately following weaning. There were significant differences between housing treatments (p<0.01) for standing, moving, eating, drinking, dog-sitting and lying. During pregnancy SC sows spent more time standing, rooting, drinking and dog sitting, while EC sows spent less time rooting and drinking and more time lying. During lactation, GC sows spent more time standing, moving and eating, less time dog sitting and lateral lying. Nursing frequency was reduced in GC sows (p<0.001). The maternal and piglet behaviors were influenced strongly by environment during lactation. However, it was also shown that previous housing history can influence the maternal behavior in the pre-farrowing stage and during early lactation.

• 복식문화연구
• /
• 제31권2호
• /
• pp.262-276
• /
• 2023

This study aims to develop a multi-functional cage for dogs as a house to reduce their anxiety when they go out using cages. This study investigates the types and characteristics of cages and cage preference by surveying men and women in their 20s who use them. The cage product reviews are also analyzed. The research results are as follows: First, domestic dog cages are classified into crate, shoulder, cross (sling bag), backpack, carrier, and stroller types. The crate type is easy to clean and can be used as a house, but it is bulky and therefore inconvenient to carry when using public transportation. The shoulder type is a fabric material with good air permeability but has the disadvantage of being easily soiled. It can be used as a house and is light weight, making it convenient when using public transportation. Second, as a result of consumer research, respondents prefer the shoulder-type fabric over the crate-type plastic material. Third, from the shoulder-type product review, the shape stability, companion dogs' psychological safety, the wearability of companions, and management convenience are derived. Fourth, based on the survey results, a multi-functional cage is developed taking into account the companion dog, companion person, and functional factors.

• 한국포장학회지
• /
• 제23권3호
• /
• pp.163-171
• /
• 2017

국내산 결구상추의 하절기 생산 제한을 수확 후 포장방법개선으로 공급을 효과적으로 유지하고자 하였다. 본 연구에서는 고온기 결구상추의 유통 및 저장 현황을 조사하였으며, 유통 현황과 기존의 결과를 근거하여 개선 가능한 포장방법을 모색하였다. 결구상추의 '유레이크'품종을 이용하여 포장재별 포장 방법에 따라 저장 중 생체중량 변화, SPAD 지수 등을 조사하였다. 포장방법은 관행적인 무포장의 플라스틱 재질 농산물 유통상자에 적재하는 저장방법에 LLDPE와 HDPE 필름 포장재를 이용하여 개별 및 박스 단위 방법으로 포장하여 저장온도 $2^{\circ}C$에서 하였다. 결구상추 저장 시 포장 방법 및 포장재에 따라서 개별적으로 LLDPE 필름으로 랩 포장한 것이 저장 21일까지 외관품위 등에서 비교적 양호한 상품성을 유지하였다. 또한 생체중량 감소율이 다른 처리구보다 적었고, 저장 중 SPAD나 색상변화 정도가 적은 경향을 보였다. 그러나 개별 포장한 결구상추의 결구내 수분감소나 경도에서는 처리별 차이를 확인하기는 어려웠다. 결구상추는 개별 포장하여 단기간 동안의 선도를 유지할 수 있었으나 개별 포장에 따른 기체 조성 변화에 큰 영향이 없어 MA 효과를 언급하기는 어려웠다. 고온기 생산성이 낮은 시기에 결구상추의 단경기 공급을 위해 개별적인 랩 포장으로 포장방법을 개선함으로써 저장성 연장에 대한 가능성을 확인하였다.

• Transactions on Electrical and Electronic Materials
• /
• 제10권3호
• /
• pp.102-105
• /
• 2009

$Li[Ni_{0.2}Li_{0.2}Mn_{0.6}]O_2$ cathode materials have been synthesized by a microwave-assisted sol-gel method. The structure and electrochemical properties of $Li[Ni_{0.2}Li_{0.2}Mn_{0.6}]O_2$ were studied by X-ray difftactometry (XRD), scanning electron microscopy (SEM) and charge-discharge cycler. The powder prepared by microwave assisted sol-gel method showed good crystallinity and well-defined facet shapes. The $Li[Ni_{0.2}Li_{0.2}Mn_{0.6}]O_2$ electrode delivered a high discharge capacity of 230 $mAhg^{-1}$ at the specific current of 40 $mAg^{-1}$ (0.2 C rate) in the voltage range of 2.0${\sim}$4.8 V. About 60 % of the discharge capacity measured at 0.2 Crate (140 $mAhg^{-1}$) was maintained at a 6 C (1200 $mAg^{-1}$)rate. The cyclic property was also stable and it did not deteriorated at a high Crate.

• 한국축산시설환경학회지
• /
• 제16권2호
• /
• pp.129-134
• /
• 2010

본 실태조사는 분만돈방과 분만틀 사용실태를 조사함으로써 분만돈의 동물복지 수준을 향상시킬 수 있는 대체 사육시설을 개발하는데 필요한 기초자료를 확보하기 위해 실시되었다. 분만돈방은 크게 형태별로 수직형 분만돈방과 사선형 분만돈방 두 가지로 구분되었으며, 분만틀은 압사방지 바(Bar)의 형태를 기준으로 수평형(Horizontal bar) 분만틀, 수직형(Vertical bar) 분만틀로 구분되었다. 기타 시설물에 대한 조사결과, 조사농가의 전체가 니플형 급수시설을 사용하고 있었으며, 약 80%가 습식급이기를 사용하고 있었고, 조사 농가의 약 40%가 전체틈바닥, 약 60%가 부분 틈바닥이었으며, 분만돈 두당 최소 $3.9\;m^2$ 이상의 면적을 제공하고 있었다. 국내의 다양한 사육시설과 환경으로 인하여 일괄적인 구조개선이나 새로운 사육시설의 적용은 쉽지 않을 것으로 판단되지만 이러한 국내 양돈농가의 실태조사 자료들을 동물복지 수준을 향상시킬 수 있는 대체 사육시설을 개발하는데 좋은 기초자료가 될 것이라 생각한다.

• 한국동물위생학회지
• /
• 제42권4호
• /
• pp.183-191
• /
• 2019

Claw lesion is one of the major causes of lameness in sows and the lameness is one of the reasons for culling of sows from the swine herd. This survey was conducted on sows in total of 8 farms with a total of 684 pigs. The lesions observed in the study were horizontal and vertical claw cracks (CWH & CWV), differences in the length of toes (T) and/or in the length of dew claws (DC) according to crates, breeds and parity of sows. Scores of claw lesions were assigned on 0, 1, 2, and 3 at each foot depending on the severity of the claw lesions. The sows' parity was classified into 1 to 2, 3 to 4, 5 to 8. Prevalence rate of claw lesions in sows raised on punched plastic crate was higher than that in sows raised on tribar crate. In prevlence rate by breeds, inbreed Landrace sows showed higher than that of Yorkshire sows. According to 4 claw lesions, the length of DC was the highest at parity 3~4 and CWV was the lowest at parity 3~4 in F1 crossbred sows raised on punched plastic crates, respectively. In Yorkshire breeds raised on punched plastic crates, the length of DC at parity 5~8 was the lowest and CWH was the highest at parity 3~4, respectively. In Landrace breeds raised on tribar crates, CWH was the highest at parity 1~2 and CWV was the lowest at parity 3~4, respectively. The high parity in F1 crossbred sows showed high prevalence rate of claw lesions than that of low parity and other inbreed sows, respectively. These results may be useful as elementary data in establishment of welfare quality protocol and preventive measures to reduce economic losses from craw lesions in sows.