• 한국산업융합학회 논문집
• /
• 제25권3호
• /
• pp.407-415
• /
• 2022

In this study, a square rounding sidewalk block frame was developed considering the simplicity of construction and the superiority of aesthetics. In addition, it is possible to prevent damage, deformation, and settlement of adjacent sidewalk blocks due to plastic deformation during car impact load of installed bollad. A non-linear structural analysis was performed through finite element analysis to examine the performance of a car crash to which this was applied. Structural safety was confirmed through car crash simulation according to the direction of impact, and it is estimated that the function can be restored by replacing some parts in case of damage due to impact.

• 한국기계가공학회지
• /
• 제11권2호
• /
• pp.92-97
• /
• 2012

In the present the usage of bicycle has increased steeply due to well-being and convenient way of movement. In car to bicycle accident, the throw distance of bicycle is very important factor for estimating collision situation. In this study, simulations and collision tests in actual car to bicycle were executed for obtaining throw distance of bicycle. The simulations were executed by PC-CRASHTM s/w with vehicle of sedan type. Sand bags were used for the behavior of bicyclist instead of dummy and factors considered were vehicle velocity, the crashed angles and part of bicycle to vehicle, and bicycle was adult type. From the results, the throw distances of tire collision of 00 was longer than that of 450 tire crash, and the throw distances of 900 frame crash were longer than those of 450 frame crash. With based on actual crash tests and simulations, restitution coefficient of between vehicle and bicycle was estimated as 0.1. Finally the increaser vehicle velocity the longer the throw distances of bicycle and the simulation results were relatively good agreement to the results of experiment.

• 한국전산구조공학회논문집
• /
• 제24권5호
• /
• pp.521-530
• /
• 2011

항공기 기체와의 체결부위가 많은 연료탱크는 체계연관성이 큰 대표적인 핵심 구성품 중의 하나로 다루어져 왔다. 회전익항공기에 광범위하게 적용되고 있는 내충격성 연료탱크는 항공기 추락 시 탑승자의 생존성 향상에 크게 기여하고 있다. 미육군에서는 항공기 추락 후 화재에 의한 인명손실을 원천적으로 방지하기 위해 군용 회전익기 역사의 초기 단계부터 연료탱크 고유의 내충격성에 관련된 군사규격을 제정하여 적용해 왔다. V-22 등의 잘 알려진 사례에 따르면 미군사규격(MIL-DTL-27422D)에서 요구하고 있는 연료탱크 충돌충격시험을 원활하게 통과하지 못하는 경우, 해당 연료탱크가 장착되는 항공기 자체의 개발일정에 심각한 지장을 초래한다. 연료탱크 충돌충격시험은 시편자체의 제작비용 및 준비기간이 상당히 소요되므로, 설계 초기단계부터 충돌충격시험에 대한 일련의 수치적 모사(numerical simulation)를 통해 실물에 의한 시행착오의 가능성을 최소화해야 한다. 본 연구에서는 충돌모사 프로그램인 Autodyn을 이용하여 연료탱크 충돌충격시험에 대한 수치적 모사를 수행하였으며, 그 결과로 구해진 등가응력 및 내부압력 평가를 통해 회전익항공기용 연료탱크의 내충격 성능을 고려한 설계방향을 제시하였다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.266-269
• /
• 2003

This paper is concerned with a forming analysis of front side members and the application of the forming effect in crash analysis of auto-body. Drawbead restraining forces are calculated with ABAQUS/Strandard in order to identify the boundary condition in forming process. Forming analysis with equivalent drawbead is carried out with LS-DYNA3D. In order to demonstrate the validity of the forming analysis, quantitative comparison of the thickness variation between the real product and the numerical simulation result is carried out. Forming histories obtained from the forming analysis are utilized as the initial condition of the crash analysis for accurate assessment of the crashworthiness.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.770-775
• /
• 2001

Steel bar breaking system is a component of a sled test system for automobile crashworthiness. It is a recent idea for the sled test. In a sled test, a crash pulse is given as a input made from a real test. The steel bar breaking system is designed to generate a certain crash pulse. Orthogonal arrays from design of experiments (DOE) are employed. The factors of the array are panel thickness and the number of steel bars, and the levels are candidate values of them. A simulation is utilized for the crash analysis. A commercial system called LS/DYNA3D is adopted. A test system is designed based on the results.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 추계학술대회 논문집(I)
• /
• pp.54-59
• /
• 2002

In general, the aluminum extrusions are used to the light construction of the high speed rail vehicle structures. However, the research works ok the crashworthy design of the high speed rail vehicle structures are not published sufficiently because the crash test of high speed rail vehicle structures costs high and is complicated. So, a method that can predict crash characteristics of a large size structure like a high speed tail vehicle should be suggested. In this study, the scale model studies are performed to predict the impact energy absorption characteristics of full scale model. In the first place, we verified the theory of scale law using FE-simulation from the crashworthiness point of view. Secondly, we performed the crush test using scale model, made of aluminum sub structure. As a result, we could predict the crash characteristics using scale model by 10∼20% error.

• 자동차안전학회지
• /
• 제9권2호
• /
• pp.20-25
• /
• 2017

KNCAP is a program to evaluate the automobile safety, providing consumer vehicle safety assessment results. The safety evaluation tests are Frontal Impact, Offset Frontal Crash, Side Crash, Side Pole Crash, Rear Impact. This is the study of the offset frontal impact safety evaluation. Currently, IIHS is performing a small overlap test. NHTSA plans to implement the oblique moving deformable barrier test. Euro-NCAP plans to implement a mobile frontal impact test. Simulation is used to compare occupant behavior and injury. We have investigated whether the introduction of the test at KNCAP is necessary. The dummy model used in the simulation was the 50th percentile male Hybrid III dummy.

• Nuclear Engineering and Technology
• /
• 제48권2호
• /
• pp.505-517
• /
• 2016

The structural integrity of a dual-purpose metal cask currently under development by the Korea Radioactive Waste Agency (KORAD) was evaluated, through numerical simulations and a model test, under high-speed missile impact reflecting targeted aircraft crash conditions. The impact conditions were carefully chosen through a survey on accident cases and recommendations from literature. In the impact scenario, a missile flying horizontally hits the top side of the cask, which is freestanding on a concrete pad, with a velocity of 150 m/s. A simplified missile simulating a commercial aircraft engine was designed from an impact loade-time function available in literature. In the analyses, the dynamic behavior of the metal cask and the integrity of the containment boundary were assessed. The simulation results were compared with the test results for a 1:3 scale model. Although the dynamic behavior of the cask in the model test did not match exactly with the prediction from the numerical simulation, other structural responses, such as the acceleration and strain history during the impact, showed very good agreement. Moreover, the containment function of the cask survived the missile impact as expected from the numerical simulation. Thus, the procedure and methodology adopted in the structural numerical analyses were successfully validated.

• 한국자동차공학회논문집
• /
• 제13권1호
• /
• pp.140-146
• /
• 2005

This study presents the development of a round recliner using the finite element method. That reduces the number of test repeating times and gives an information about stiffness. A simulation model of round recliner mounting seat module and tooth strength simulation are established using a PAM-CRASH and ABAQUS. With the optimization of gear profile, structural strength design of round recliner was achieved. The round recliner seat module simulation, structure strength simulation and a crash safety are requested by FMVSS test. Solution of round recliner optimum variable study and design problem are searched for round recliner stress, deformation and application. Also an examination of safety is made.

• 한국산학기술학회논문지
• /
• 제17권3호
• /
• pp.171-176
• /
• 2016

본 논문은 도로안전시설물의 공용중 부식 발생으로 인한 기능 손실을 줄일 수 있는 방안으로 고내식성 용융합금도금 강판을 적용한 도로안전시설물을 제안한다. 고내식성 용융합금도금강판을 적용한 도로안전시설물 제품에 대한 신뢰성 있는 충돌성능 평가 기초자료를 제공할 목적으로 고내식강이 적용된 교량난간 제품에 대한 충돌 시뮬레이션 및 실물 차량 충돌시험 연구를 수행한다. 시뮬레이션 및 실차충돌 시험 결과, 변형률 속도 의존성을 고려할 수 있는 정교한 동특성 재료모델을 도입한 충돌 시뮬레이션을 통해 얻어지는 충돌 거동과 실물 차량 충돌 시험 결과가 매우 유사한 것으로 도출되었다. 본 논문에서 제안된 고내식성 용융합금도금 강판을 적용한 교량난간은 실물 차량 충돌 시험의 충돌성능 평가 기준을 모두 충족시켜 현장 적용을 앞두고 있다.