• Journal of Korean Society of Transportation
• /
• v.29 no.4
• /
• pp.53-62
• /
• 2011

This study discusses the effectiveness of safety management programs resulted from examining crash data collected during the period of implementation of the programs by a commercial transport company. For the analysis, two tye of comparison approaches are adopted: 1) a study comparing before-after of the implementation of a safety program, and 2) a study comparing a traffic accident index for various target groups. Technically, the effect of the safety management program is derived by eliminating both the 'regression to the mean' and the changing trend in the traffic accident index. The results show that safety management programs are effective to prevent traffic accidents, whereas company type appears irrelevant. The results also show that the effectiveness is significantly different depending on the intensity of safety management program and company size. In addition, a reciprocal effect is very likely to existamong the combination of these variables. This indicates that in order to improve the accident reduction effectiveness of such programs, the development and application of safety management programs based on both safety management strength and company size are required.

• Journal of the Korean Electrochemical Society
• /
• v.2 no.2
• /
• pp.106-111
• /
• 1999

The effect of the MG on the electrochemical charge-discharge properties of $CaNi_5$ hydrogen storage alloys was investigated under Ar and $H_2$ atmosphere. $CaNi_5$ alloy was partially decomposed to CaO and Ni phase during the MG process. The decomposition of $CaNi_5$ alloy was enhanced by the MG process which leads to crash and reformation of oxide layer on the alloy surface. As the MG process time increased, initial discharge capacity of the electrode was reduced, but the decay rate of the capacity compared to $CaNi_5$ alloys was slower. It may be described that the degradation of $MG-CaNi_5$ electrode was caused by the reduction of the reversible hydrogen reaction sites and increasing polarization resistance of hydrogen adsorption resulted from phase decomposition and disorder during the MG process, and/or by hydroxide formation during the electrochemical charge-discharge cycles.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.5
• /
• pp.53-73
• /
• 2023

Although it is mandatory to wear a seat belt that can minimize human injury when traffic accident occurs, the number of traffic accident casualties not wearing seat belts still accounts for a significant proportion.The seat belt wearing detection system for all seats is a system that identifies whether all seat passengers wear a seat belt and encourages their usage, also it can be a useful technical countermeasure. Firstly, this study established the viability of system implementation by assessing the factors influencing the severity of injuries in traffic accidents through the development of an ordered probit model. Analysis results showed that the use of seat belts has statistically significant effects on the severity of traffic accidents, reducing the probability of death or serious injury by 0.054 times in the event of a traffic accident. Secondly, a meta-analysis was conducted based on prior research related to seat belts and injuries in traffic accidents to estimate the expected reduction in accident severity upon the implementation of the system.The analysis of the effect of accident severity reduction revealed that wearing seat belts would lead to a 63.3% decrease in fatal accidents, with the front seats showing a reduction of 75.7% and the rear seats showing a reduction of 58.1% in fatal accidents. Lastly, Using the results of the meta-analysis and traffic accident statistics, the expected decrease in the number of traffic accident casualties with the implementation of the system was derived to analyze the traffic safety effects of the proposed detection system. The analysis demonstrated that with an increase in the adoption rate of the system, the number of casualties in accidents where seat belts were not worn decreased. Specifically, at a system adoption rate of 60%, it is anticipated that the number of fatalities would decrease by more than three times compared to the current scenario. Based on the analysis results, operational strategies for the system were proposed to increase seat belt usage rates and reduce accident severity.

• The Journal of the Korea Contents Association
• /
• v.19 no.10
• /
• pp.179-189
• /
• 2019

Korea's transportation paradigm is shifting from a vehicle-centered to a pedestrian-oriented society. Therefore, the interest in pedestrian safety and the improvement of pedestrian environment is also increasing. However, the level of traffic safety in Korea is still severe. It is needed to improve pedestrian safety and pedestrian environment. This study studied pedestrian-vehicle accident data provided by the Traffic Accident Analysis System(TAAS) for 2013-2015 to build a safe walking environment around school zones, and the relation between the school zones and pedestrian-vehicle traffic accidents were identified through the geographic information system(GIS) and spatial regression model. The main results are as follows. First, both road and public transportation factors are likely to increase pedestrian traffic accidents in school zones. Second, regarding land-use factors, residential, commercial, and industrial areas are found to increase pedestrian traffic crashes. On the other hand, mixed use is likely to play a role on the reduction of pedestrian traffic accidents. Finally, it has been shown that high development density also has a positive effect on pedestrian traffic accidents in school zones.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.6
• /
• pp.1075-1082
• /
• 2016

In order to calculate the optimum installation interval between a speed hump and hump type crosswalk that are installed continuously in succession, this study examined the speed of a vehicle that passes different intervals between speed humps and hump type crosswalks from the approach section of a roundabout having a maximum speed limit of 30km/h; analyzed the effects of speed humps and hump type crosswalks installed continuously in succession on vehicle driving speed; and simulated the optimum installation height of hump type crosswalk. As a result, the following conclusion was drawn. First, it was found that the optimum interval between a speed hump and hump type crosswalk, which are the representative traffic calming techniques for reducing vehicle speed, to control vehicle speed under 30km/h is 30m. Second, as a result of comparing the deceleration of a vehicle that pass hump type crosswalks, it was found that if the installation interval is 65 m and above, a speed hump and hump type crosswalk had no effect. Therefore, it is desirable that the maximum installation interval between a speed hump and hump type crosswalk for controlling vehicle speed within a fixed road section should not exceed 65m. Third, the analysis showed that the optimum installation height of hump type crosswalk is 6-8cm in case vehicle speed at the approach section is 20km/h or lower, 8-10cm in case of 30km/h, and 10cm in case of 30km/h or higher, respectively. Fourth, even at a road section on which a speed hump and hump type crosswalk are installed, speed reduction effects may sometimes be insignificant due to a driver's studying effect, traffic conditions and so on. Thus, it is judged that speed reduction effects will be greater if several traffic calming techniques such as speed hump, chicane, and choker are applied at the same time. Therefore, in case of applying traffic calming techniques for the purpose of reducing vehicle speed in order to promote pedestrian safety, the composite application of several techniques should be considered.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.4
• /
• pp.1120-1133
• /
• 2018

The purpose of this study is to validate the failure attribution factors affecting emotional changes after a failed service by local restaurant users, and the relapse effects of the perceived failure of a customer's brand relationship. In this study, the implications of this study can be divided into the null theory and the homogenous theory, in which the study of the relationship between individual belief that influences the null theory and the post-gender emotional response is minimal. The independence of the crash response (angerous VS compassion) has been equally validated as building a belief-gathering-emotion three-step model. First, emotional BRQ (intimate and love) has a reduction effect on controllable geeks, and behavioral BRQ (relative existence) has an extended effect on controllable geeks. From a management perspective, restaurant managers should be less aware of the repeatability of a customer's service failure and call for customer sympathy. Integratedly, restaurant managers must control the customer's perception of service failure and restore the impact of the customer's BRQ on emotional reactions. A variety of service recovery measures should be established and the cerumen should be controlled. In addition, since BRQs have different effects on anger and sympathy (extended VS), different service failure recovery plans should be presented depending on the characteristics of the customer BRQ. For example, measures such as monetary compensation or fair dealing, emotional distribution to close and loving customers, and persuasion of reciprocal benefits to interdependent customers should be developed according to circumstances. This study explored the effectiveness of the geeks after a service failure and has limitations that do not take into account the various regulatory factors in the BRQ-return-Empression process. Thus, in further studies, the effects of adjusting service failure strength should be considered and a more complete model should be built.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.2
• /
• pp.157-168
• /
• 2008

Statement of problem: Over the past two decades, implant supported fixed prosthesis have been widely used. However, there are few studies conducted systematically and intensively on the splinting effect of implant systems in mandible. Purpose: The purpose of this study was to investigate the changes in stress distributions in the mandibular implants with splinting or non-splinting crowns by performing finite element analysis. Materials and methods: Cortical and cancellous bone were modeled as homogeneous, transversely isotropic, linearly elastic. Perfect bonding was assumed at all interfaces. Implant models were classified as follows. Group 1: $Br{{\aa}}nemark$ length 8.5mm 13mm splinting type Group 2: $Br{{\aa}}nemark$ length 8.5mm 13mm Non-splinting type Group 3: ITI length 8.5mm 13mm splinting type Group 4: ITI length 8.5mm 13mm Non-splinting type An load of 100N was applied vertically and horizontally. Stress levels were calculated using von Mises stresses values. Results: 1. The stress distribution and maximum von Mises stress of two-length implants (8.5mm, 13mm) was similar. 2. The stress of vertical load concentrated on mesial side of implant while the stress of horizontal load was distributed on both side of implant. 3. Stress of internal connection type was spreading through abutment screw but the stress of external connection type was concentrated on cortical bone level. 4. Degree of stress reduction was higher in the external connection type than in the internal connection type.