• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.1
• /
• pp.1-11
• /
• 2020

Medium to large post structures installed along the roadside without proper protection can lead to serious vehicle damage and occupant injury at the impact. In North America and Europe, splitting systems such as slip base or breakaway device are used to reduce impacts. But the system has the risk of secondary accident when the splitted post falls down to the traffic or pedestrian. Sliding Post have been proposed as a way to solve this problem. By studying the crash test results of the 1.3ton and 0.9ton vehicle with 60 km/h and 80 km/h to a Rigidly Fixed Post (RFP) and Sliding Post (SP), danger of the conventional RFP and crashworthiness of the SP have been proven. While collision analysis only from the acceleration measured at the center of the vehicle assumes the motion of the post is the same as that of the vehicle, in this paper, by adding high speed film data to the analysis with vehicle acceleration could have separate the post motion from the vehicle motion. It gives better explanations on the movement of post and vehicle in each distinctive time step and provides basics to the crashworthy post design.

• International Journal of Highway Engineering
• /
• v.12 no.1
• /
• pp.21-27
• /
• 2010

Management of driver hours of service (HOS) for commercial vehicle operators has been a continual safety challenge. One of the more critical issues to government and motor carriers is fatigue and fatigue-related accidents. To reduce truck drivers’fatigue-related accident risk in other countries, the government issued the HOS regulations. However, korea government does not have any HOS regulations. The objective of this research gives the clues that korea should have the HOS regulation to reduce truck drivers’fatigue-related accident risk. This study examines the HOS regulation over other countries and conducts relative accident risk analysis using the real data from 3 freight companies. The data set includes 231 accident involved drivers and 462 non-accident drivers. Therefore, the size of the total data set is 693 drivers. One of the most important aspects of early studies of safety and HOS was the need to characterize continuous driving by using the notion of "survival". Subsequent research used a data replication scheme and logistic regression to capture the survival effect. This study uses time-dependent logistic regression. The test of significance between parameters indicates that the first three hours are almost the same risk. In the 10th hour of driving, the risk was more than 2.2times that in the baseline first hour. In conclusion, as driving time goes on, the crash risk increases.

• Journal of the Society of Disaster Information
• /
• v.17 no.3
• /
• pp.655-666
• /
• 2021

Purpose: This study is to develop a method for measuring dynamic speeding risks using vehicle trajectory big data and to demonstrate the feasibility of the devised speeding index. Method: The speed behaviors of vehicles were analysed in microscopic space and time using individual vehicle trajectories, and then the boundary condition of speeding (i.e., boundary speed) was determined from the standpoint of crash risk. A novel index for measuring the risk exposure of speeding was developed in microscopic space and time with the boundary speed. Result: A validation study was conducted with vehicle-GPS trajectory big data and ground-truth vehicle crash data. As a result of the analysis, it turned out that the index of speeding-risk exposure has a strong explanatory power (R²=0.7) for motorway traffic accidents. This directly indicates that speeding behaviors should be analysed at a microscopic spatiotemporal dimension. Conclusion: The spatial and temporal evolution of vehicle velocity is very variable. It is, hence, expected that the method presented in this study could be efficaciously employed to analyse the causal factors of traffic accidents and the crash risk exposure in microscopic space using mobility trajectory data.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.2
• /
• pp.33-43
• /
• 2022

The number of car crashes increases along with the increasing number of vehicles. Hence, diverse initiatives on traffic accidents have been implemented, targeting zero crash fatalities. According to the 3rd Traffic Safety Master Plan of 2016, the current standard selecting road accident black spots prioritizes locations with the high cumulative death toll. While this standard is suitable for roads that a city government manages to some extent, it is not suitable for roads less than 20 meters that a borough (Gu) handles. The roads under the supervision of a borough do not have enough death toll, and thus improvements on its road accident black spots are highly limited. In addition, discovering the causes of traffic accidents is not easy when the number of car accidents is obtained by considering only fatal accidents, which are relatively low in number. Therefore, including all traffic accidents might identify causes of accidents and result in better advancements. Therefore, this research follows rational decision-making and suggests new National Traffic Safety Master Plan standards. These new standards are obtained by comparing accident costs between the location of fatal crashes and road accident black spots. The analysis result shows that considering all types of accidents yields better results. For example, a Three-way Intersection in front of Zion Day Care Center, one of the selected spots under the current standard, has lower road crash costs than Sinchon Intersection, a selected spot under a new standard. Therefore, the study concludes that the standards to select road accident black spots need to include traffic accident severity and road crash costs.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.10a
• /
• pp.226-229
• /
• 2008

Hot press forming is an advanced forming technology fur manufacturing of complex and crash-resistant automotive parts using ultra high strength steels. The 3-dimensional FE analysis of hot press forming process, in which process the deformation, heat transfer and phase transformation behavior are fully coupled, is carried out. The vast amount of material properties for the FE analysis is obtained from material properties calculation software which is based on thermodynamic calculations. The overall methodology for the FE analysis of HPF process and the analysis results are discussed here.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.3
• /
• pp.46-51
• /
• 2002

Recently, High capacity alternator are used fur some special equipments in industry. But, several serious problem are occured, especially, broken coil of rotor, caused by crash with stator on rotating the rotor. Although added coil cover thor protect coil of rotor, coil cover is broken. In this study purpose 2 step for corrected that problems. First, three dimensional finite element method far investigate what is most important point. For that purpose, performed stress analysis of coil and coil cover that modeling and finite analysis by ANSYS software. Second, Apply prestress when winding the coil on stator to modify direction of net force. Vector analysis is used for determine corrected prestress. Result of the analysis and prestress are reviewed.

• Journal of Korean Society of Transportation
• /
• v.29 no.4
• /
• pp.7-15
• /
• 2011

Emerged in early 1990s, so called 'Quick service' industry that provides faster delivery of small parcels than regular mail service accelerated use of motorcycles. As the economic grows, use of large bicycles (more than 250CC displacement) for leisure purpose has also rapidly increased. Traffic crash data clearly shows the increasing trend in motorcycle crashes. The ratio of motorcycle involved crashes out of total has increased from 5.7% in 2005 to 8.3% in 2008, and similar trend can be found in fatalities ratio as well. In this study, we assess the level of risk when motorcycles operate on motorways by analyzing traffic rule violation ratio, lane change behaviour, driving speed behaviors of motorcycles in Uninterrupted Traffic Flow Facilities and using PC-CRASH simulation we also calculate car shock impulses occurred when an accident happens. Analysis result shows that the motorcycle is different from the car in terms of lane change timing and average speed, and also shows motorcycle drivers tends to conduct more improper driving behavior particularly when traffic is congested. The results from this study could be usefully applied when the law enforcement agent decides whether bicycles shall be allowed to use motorways. The result could be also utilized as fundamental information for further study of bicycles' driving behavior.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.3
• /
• pp.115-121
• /
• 2012

In spite of serious injuries caused by traffic accidents of car-pedestrian, the dispute is constantly occurring and economic losses and mental suffering is escalating since the cause of accidents is not scientifically identified. This study reviewed vehicle dynamics, driving dynamics, collision dynamics, traffic and road engineering for traffic accidents analysis based on traffic accidents related physically objective evidence and analysed the cause of accidents by getting results which applied vehicle initial collision velocity before collision, processing trajectory, collision stance, vehicle velocity before & after collision and parameter by using PC-Crash program. I found that skid mark and collision velocity of car-pedestrian had the error of 11.2%, 2,27% compared to theoretical values.

• International Journal of Highway Engineering
• /
• v.19 no.6
• /
• pp.201-212
• /
• 2017

PURPOSES : The objective of this study is to identify the characteristics affecting traffic accidents that have occurred in 564 industrial complexes nationwide from 2011 to 2015. METHODS : The traffic accidents were specified using various factors such as industrial complex type (national VS. general), industrial complex degradation (old VS. non-old), location of complex (capital VS. non-capital), and traffic law violation (speeding, signal violation, and median invasion). The average number of crashes and accident ratio (fatal, severe, and both) in terms of characteristics of industrial complexes were calculated. With a sample of crashes of the industrial complexes for 5 years, statistical significances were tested to analyze and compare the differences based on industrial complex and traffic law characteristics using parametric and non-parametric methods. RESULTS : From statistical results, it is observed that the crash frequency occurring in old industrial complexes is three times higher than that in non-old industrial complexes. Old industrial complexes located in a capital area, old national industrial complexes, and old general industrial complexes are considerably related to higher crash frequency, but the fatal accident ratio appeared to have no statistical difference across industrial complex characteristics. Severe crashes are more likely to occur in non-old industrial complexes on an average. CONCLUSIONS : It is necessary to eliminate potential threats to roads and traffic in the same manner as illegal parking in industrial complexes through the restoration of old industrial complexes. To improve the efficiency of road infrastructure, efforts should be made to improve traffic safety in accordance with industrial characteristics such as planning and operation of relevant local government programs.

• Journal of Auto-vehicle Safety Association
• /
• v.8 no.3
• /
• pp.10-15
• /
• 2016

The purpose of this study is to evaluate the injury mechanism of facial injury related to an air-bag's deployment in occupant motor vehicle accident (MVA) by using Hospital Information System (HIS) and reconstruction program, based on the materials related to motor vehicle accidents. Among patients who visited the emergency department of Wonju Severance Christian Hospital due to motor vehicle accidents from August 2012 to February 2014, we collected data on patients with agreement for taking the damaged vehicle's photos. After obtaining the verbal consent from the patient, we asked about the cause of the accident, information on vehicle involved in the accident, and the location of car repair shop. The photos of the damaged vehicle were taken on the basis of front, rear, left side and right side. Damage to the vehicle was presented using the CDC code by analytical study of photo-images of the damaged vehicle, and a trauma score was used for medical examination of the severity of the patient's injury. Among the 309 patients with agreement for an investigation, thirty five (11.3 %) were the severe who had ISS over 15. And also, sixteen (5.2%) derived from the reconstructed data (maximum collision energy, maximum acceleration, delta V) by PC-Crash. As a result, ISS including the facial injuries was affected by the condition. It was high when the number of crash extent, the safety belt was not fastened, and the seating position of occupant and the direction of collision is same. For accurate analysis of the relationship between occupant injury and vehicle damage in MVAs, build-up of an in-depth database through carrying out various policies for motor vehicle accidents is necessary for sure.