• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1683-1684
• /
• 2008

In this paper, a hierarchical nonsingular terminal sliding mode controller (TSMC) for overhead crane system using nonsingular terminal sliding surface (NTSS) is proposed, which can drive the error to zero in a finite time. Here, singular problem of controller is solved by NTSS. In addition, the controller has the double layer structure because the system is divided into two hierarchical subsystems. In the first layer, the nonsingular terminal sliding surfaces are hierarchically designed for each subsystem, and in the second layer, the whole sliding surface is designed as the linear combination of nonsingular terminal sliding surfaces. The asymptotic stability of the system is verified by Lyapunov analysis. Finally, we carry out simulations on the overhead crane system to illustrate the effectiveness of the proposed control method.

• 소음진동
• /
• 제7권5호
• /
• pp.765-772
• /
• 1997

This paper presents the swing motion analysis of the container crane headblock with the passive control device using hydraulic motors and anti-swing ropes. The device hauls at the headblock to opposite direction of its swing motion using the tension difference between anti-swing ropes connected to the headblock. To consider this control mechanism, the headblock is modelled as the rigid bar suspended by two hoist ropes at the overhead trolley and its non-linear equation of motion is derived using Lagrange's equation. Some numerical experiments using the equation are carried out to investigate the swing motion characteristics of the headblock under the variation of geometric relation among the cargo handling components and to evaluate the performance of the anti-swing device.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 G
• /
• pp.2461-2463
• /
• 1998

The container crane is more expensive than other cranes, and is designed for efficient use. Since there are more control variables than other crane has more fault factors. Therefore it is important to reduce these factors efficiently and also to increase the capacity to move more freight in due time. To solve the above problems the velocity relation of the motor will be examined. In this paper the velocity relation of the motor will be expressed in a mathematical equations for efficient control.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.2458-2460
• /
• 2000

The goal of crane control system is transporting heavy objects to a target position as fast as possible without rope oscillation. This paper presents a GA-based fuzzy logic controller for crane system. GA is going to decide membership functions, instead of an expert. In this paper, The centers and widths of the membership function of the fuzzy sets defined over the input space, the orders and parameters of subsystems in the consequence parts are adjusted by a genetic algorithm. The effectiveness of the proposed method is verified by simulation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.2567-2568
• /
• 2000

The container crane is more expensive than other cranes, and is designed for efficient use. Since there are more control variables than other crane has more fault factors, Therefore it is important to reduce these factors efficiently and also to increase the capacity to move more freight in due time. To solve the above problems the velocity relation of the motor will be examined. In this paper, the velocity relation of the motor will be expressed in a mathematical equations for efficient control.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1993년도 Fifth International Fuzzy Systems Association World Congress 93
• /
• pp.1370-1373
• /
• 1993

In controlling a system having many variables to control and multi objectives to satisfy such as a roof crane system, it is often difficult to obtain fuzzy If-Then rules in usual ways. As an alternative, we can more easely obtain rules in such a manner that we obtain each independent group of rules using partial variables for a partial objective. In this case, obtained rules can be conflicting with each other and conventional inference methods cannot handle such rules effectively. In this paper, we propose a roof crane controller with optimal velocity profile generator and a fuzzy logic controller with an inference method suitable for such conflicting rules.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권4호
• /
• pp.880-888
• /
• 2001

This paper presents a fault detection asnd isolation algorithm for highly reliable gantry crane system. The algorithm is constructed by multiple PI observer technique, and the magnitude of actuator fault can be estimated by using integrated estimated output error. Also, the complex actuator and /or sensor fault can be detected and isolated by monitoring the integrated error and the estimated state error. Considering the actuator and/or the sensor fault, we verify that these fault can be detected and isolated through simulation. Lastly, we show a simple reliable control method by using the detected fault signal and an added observer.

• 한국멀티미디어학회논문지
• /
• 제12권12호
• /
• pp.1728-1735
• /
• 2009

Human action tracking plays an important place in human-computer-interaction, human action tracking is a challenging task because of the exponentially increased computational complexity in terms of the degrees of freedom of the object and the severe image ambiguities incurred by frequent self-occlusions. In this paper, we will propose a novel method to track human action, in our technique, a dynamic background estimation algorithm will be applied firstly. Based on the estimated background, we then extract the human object from the video sequence, and the skeletonization method and Hough transform method will be used to detect the main structure of human body and each part rotation angle. The calculated rotation angles will be used to control a crane in the port, thus we can just control the container crane by using signalman body. And the experimental results can show that our proposed method can get a preferable result than the conventional methods such as: MIT, JPF or MFMC.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.54.2-54
• /
• 2001

In this paper two control strategies, command shaping control and optimal control, which aim to the reduction of the residual vibrations of the payload in a container crane system are investigated. Both control methods are open loop control. Due to unmodeled dynamics of the plant and disturbances like initial sway and wind, some residual sway always exists at the end of trolley movement. Command inputs are designed to achieve the control objectives including minimal residual vibration and robustness in the presence of unmodeled dynamics. Simulation results of various command inputs are compared in terms of arrival time, residual sway angle, robustness, and maximum sway distance during the traveling. Command shaping method provides a more competent tool than optimal control.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권5호
• /
• pp.552-567
• /
• 2017

The floating crane vessel in waves gives rise to the motion of the lifted object which is connected to the hoisting wire. The dynamic tension induced by the lifted object also affects the motion responses of the floating crane vessel in return. In this study, coupled motion responses of a floating crane vessel and a lifted subsea manifold during deep-water installation operations were investigated by both experiments and numerical calculations. A series of model tests for the deep-water lifting operation were performed at Ocean Engineering Basin of KRISO. For the model test, the vessel with a crane control system and a typical subsea manifold were examined. To validate the experimental results, a frequency-domain motion analysis method is applied. The coupled motion equations of the crane vessel and the lifted object are solved in the frequency domain with an additional linear stiffness matrix due to the hoisting wire. The hydrodynamic coefficients of the lifted object, which is a significant factor to affect the coupled dynamics, are estimated based on the perforation value of the structure and the CFD results. The discussions were made on three main points. First, the motion characteristics of the lifted object as well as the crane vessel were studied by comparing the calculation results. Second, the dynamic tension of the hoisting wire were evaluated under the various wave conditions. Final discussion was made on the effect of passive heave compensator on the motion and tension responses.