• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.450-453
• /
• 1997

An active control for the swing of crane systems is very important for increasing the productivity. This article introduces the control for the position and the swing of a crane using the fuzzy learning method. Because the crane is a multi-variable system, learning is done to control both position and swing of the crane. Also the fuzzy control rules are separately acquired with the loading and unloading situation of the crane for more accurate control. The result of simulations shows that the crane is just controlled for a very large swing angle of 1 radian within nearly one cycle.

• Journal of Forest and Environmental Science
• /
• 제38권4호
• /
• pp.239-248
• /
• 2022

Forestry crane work in a forest harvester or forwarder is regarded as one of most hard work requiring a very high level of operation skill. The operator must handle two or more multi-axes joysticks simultaneously to control the multiple manipulators for maneuvering the crane-tip to its intended location. This study has been carried out to develop a crane-tip controller which can intuitively maneuver the crane-tip, resulting in improving the productivity by decreasing the technical difficulty of control as well as reducing the workload. The crane-tip controller consists of a single 2-axis joystick and a control algorithm run on microcontroller. Lab-scale forestry crane was constructed using electric cylinders. The crane-tip control algorithm has the crane-tip follow the waypoints generated on the given path considering the dead band region using LBO (Lateral Boundary Offset). A speed control gain to change the speed of relevant cylinders relatively is applied as well. By the P (Proportional) control within the control interval of 20 msec, the average error of crane-tip control on the predefined straight path turned out to be 14.5 mm in all directions. When the joystick is used the waypoints are generated in real time by the direction signal from the joystick. In this case, the average error of path control was 12.4 mm for straight up, straight forward and straight down movements successively at a certain constant speed setting. In the slant movement of crane-tip by controlling two axes of joystick simultaneously, the movement of crane-tip was controlled in the average error of 15.9 mm when the crane-tip is moved up and down while moving toward forward direction. It concluded that the crane-tip control was possible using the control algorithm developed in this study.

• 한국정밀공학회지
• /
• 제16권7호
• /
• pp.144-150
• /
• 1999

n active control for the swing of crane systems is very important for increasing the productivity. This article introduces the control for the position and the swing of a crane using the fuzzy learning method. Because the crane is a multi-variable system, learning is done to control both position and swing of the crane. Also the fuzzy control rules are separately acquired with the loading and unloading situation of the crane for more accurate control. The result of simulations shows that the crane is just controlled for a very large swing angle of 1 radian within nearly one cycle.

• 한국산업융합학회 논문집
• /
• 제2권1호
• /
• pp.61-67
• /
• 1999

An active control for the swing of crane systems is very important for increasing the productivity. This article introduces the control for the position and the swing of a crane using the fuzzy learning method. Because the crane is a multi-variable system, learning is done to control both position and swing of the crane. Also the fuzzy control rules are separately acquired with the loading and unloading situation of the crane for more accurate control. And We designed controller by fuzzy learning method, and then compare fuzzy learning method with LQR. The result of simulations shows that the crane is controlled better than LQR for a very large swing angle of 1 radian within nearly one cycle.

• 대한기계학회논문집A
• /
• 제21권10호
• /
• pp.1683-1693
• /
• 1997

In this paper, a new nonlinear dynamic model is derived for a 2-dimensional overhead crane based on a new definition of 2-degree-of-freedom swing angle, and a new anti-swing control law is proposed for the crane. The dynamic model and control law take simultaneous travel and traverse motions of the crane into consideration. The model is first linearized for small motions of the crane load about the vertical stable equilibrium. Then the model becomes decoupled and symmetric with respect to the travel and traverse axes of the crane. From this result, a decoupled anti-swing control law is proposed based on the linearized model via the loop shaping and root locus methods. This decoupled method guarantees not only fast damping of load-swing but also zero steady state position error with optimal transient response for the 2-dimensional motion of the crane. Finally, the proposed control method is evaluated by controlling the simultaneous travel and traverse motions of a 2-dimensional prototype overhead crane. The effectiveness of the proposed control method is then proven by the experimental results.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2002년도 추계공동학술대회논문집
• /
• pp.113-119
• /
• 2002

최근에, 자동화 크레인 제어 시스템은 빠른 속도와 신속한 수송이 요구되어 지고 있다 컨테이너 야드 내에서 크레인 시스템의 동작 동안, 스프레더에 매달린 컨테이너의 흔들림은 최소화로 되도록 크레인의 트롤리 위치와 와이어 로프 길이 제어가 필요하다. 크레인 시스템에서 자동 주행 제어 기술과 흔들림 방지 기술을 사용하여 무인 자동화 제어 시스템의 개발을 할 수 있는 핵심 기술이다. 그 결과 우리는 트랜스퍼 크레인 시스템 제어에서 자동 주행 제어를 위한 제어기를 설계하였다. 크레인 시스템을 통한 시뮬레이션 분석에서 다른 기존의 제어기들보다 우수한 제어 수행을 증명하였다.

• 한국건축시공학회지
• /
• 제20권6호
• /
• pp.497-504
• /
• 2020

국내 건설 현장 타워크레인의 사용량 증가에 따른 재해 감소를 위한 연구가 진행되고 있지만 무인타워크레인에 대한 연구는 미비한 실정이다. 따라서 본 연구에서는 타워크레인 유형별 사고 요인의 중요도 순위를 AHP 분석을 통해 도출하여 제시하고자 한다. 분석 결과 무인타워크레인에서 인양 작업이 가장 높은 중요도를 보였다. 본 연구 결과를 바탕으로 중요도가 높은 요인을 우선적으로 관리하여 타워크레인 사고 저감을 위한 조치가 필요할 것으로 사료된다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.395-398
• /
• 1996

In this study, when the nonlinear overhead crane which allows simultaneously travel and traverse motion moves a desired transport route, the object suspended the end of rope does undesirable swing motion. Nonlinear overhead crane pertubes in the vicinity of an operating point, therefore the nonlinear overhead crane is modified to linear overhead crane for the operating point. The linear overhead crane was controlled to swing angles of the object by the ratio of torque inputs to motors of the girder and the trolley. As a basis for the result of the linear overhead crane, the nonlinear overhead crane was controlled swing angles of the object and positions of the overhead crane without collision with environmental equipment by partial state feedback control.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2013년도 특별논문집
• /
• pp.8-12
• /
• 2013

DNV crane criteria are specially designated for the vessel equipped with lifting crane to cover the risk during the crane operation. Based on the DNV crane criteria, the crane performance shall be decided. The weight control has great importance in the management of vessel's design for crane vessel. To evaluate limitation of lightship weight and the effect of design changes sufficiently, the lightship allowable VCG curve was used. The optimization process was carried out for generation of the lightship allowable VCG curve due to the difficulty coming from the characteristic of DNV crane criteria. This paper includes the introduction to the DNV Crane criteria and optimization process for evaluation in aspect of lightship weight and VCG.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1788-1791
• /
• 1997

In this paper constant-level luffing and time optimal control of a JIB crane is investigated. The crane is assumed to have only the derricking motion. the analysis of plance kinematics provides the relationship between the boom angle and the main hosit motor angle for constant-level luffing. The dynamic equations for the crane are very nonlimear, and therefore they are linearized for the application of the linear control theory. The time optimal control in the perspective of no-sway at the end of boom stroke is investigated.