• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2003년도 학술.기술논문발표회
• /
• pp.37-40
• /
• 2003

This present paper mainly contains adhesion part disconnection type exposure composition waterproof method using embossing PVC sheet. The existing polymer resin coating and sheet waterproofing construction method have, however, some weak point such as being decrease life cycle of concrete with water leaking from materials be affected by crack and movement dash bond concrete through the whole-adhere construction. Above the reason, this paper has particular method increasing crack-defending performance from stress occurred concrete movement by part disconnection, adds maintain waterproofing performance subordinate sheet, that can be contributed a convenience of maintenance which is decreasing industrial waste and repair construction cycle through the part repair in case of leaking water.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 추계학술발표대회 논문집
• /
• pp.115-118
• /
• 2000

The development of high-strength fibers such as boron/epoxy and carbon/epoxy and adhesives has made it possible to repair cracked metallic plates by bonding reinforcing patches to the plate over the crack. In this study, aluminum 6061-T6 alloy plates with the high strength are applied to specimens with a cracked bolt hole to study the effect of diverse patch materials on the fatigue behavior of this structure. Additionally, the observation of the effort of different patch sizes on the specimen was performed. The results shows that the patch repair can improve the static strength by about 17% and the fatigue life by 200% compared with non-repaired case. And it was also revealed that the patching method along to crack growth direction is mort efficient in cost and weight reduction.

• 한국정밀공학회지
• /
• 제21권5호
• /
• pp.158-165
• /
• 2004

Up to now, many crack repair techniques have been developed for inhibiting crack growth in structural components. However, the simplest way for inhibiting crack growth is to apply a indentation at the crack tip or at some distance ahead of the expected crack growth path so as to produce residual compressive stresses that can reduce the effective stresses around the crack tip. In spite of its importance to the aerospace industry, little attention has been devoted to evaluation of the indentation residual stress effect on the fatigue crack initiation life quantitatively. Therefore, in the present work, the magnitude and distribution of the indentation residual stresses were investigated in order to estimate the beneficial effect on fatigue crack initiation by using finite element method. Furthermore, to examine the validity of finite element analysis results, residual stress distribution in the indented specimen was measured by using X-ray diffraction technique, and fatigue crack behavior at fastener hole in aluminum alloy 7075-T6 before and after indentation processes was investigated.

• Journal of Welding and Joining
• /
• 제27권4호
• /
• pp.32-37
• /
• 2009

Alloy 600 and Alloy 82/182 materials have been used widely in PWR plants. But these materials are known to be susceptible to PWSCC(Primary Water Stress Corrosion Cracking). Recently, there have been several PWSCC events in major components due to repair welding, because repair welding in the dissimilar metal welds during the construction increases residual stress significantly on the inner surface of welds. In this paper, various residual stress analyses for repair welding were performed using FEM to check the effect of repair welding on residual stress distributions in PZR safety/relief nozzle. The results indicate that for inside surface repair welding, high tensile residual stress is developed on the inside surface of the nozzles.

• Journal of Advanced Marine Engineering and Technology
• /
• 제23권3호
• /
• pp.331-337
• /
• 1999

Cracks on the cylinder block of diesel engines will often happen due to cyclic load and thermal stress. According to the Classification Societies' rules welding reparis of cylinder block made of cast irons are generally not permitted. However such welding repairs became inevitable taking enormous cost and time for their renewal into consideration. In this study repair welding methods for the clinder blocks made of gray cast irons were reviewed and the tests of their welds were carried out in order to purpose the repair welding meth-ods of packing seat and o-ring seat of cylinder block and apply them to the practice. The following conclusions are botained :1 The tensile strength of weld of cast iron more than that of base metal can be obtained by means of preheating keeping temperature above $100^{\circ}C$ between welding pass-es preventing slag inclusion peening and cramping weld metal by studs. 2. The suspected crack by a magnetic particle test due to different magnetic permeability can be identified which are not associated with a mechanical discotinuity.

• 한국건설순환자원학회논문집
• /
• 제11권4호
• /
• pp.458-466
• /
• 2023

우리 주변의 구조물들은 시간이 지남에 따라 환경적, 화학적 요인에 의해 열화 현상이 발생하며 구조물의 성능저하 현상이 나타난다. 콘크리트 구조물의 가장 큰 열화 현상 원인으로 탄산화, 염해, 동결융해 현상이 있다. 이러한 열화현상에 대하여 다양한 보수공법이 있다. 그러나 기존의 보수 공법에 대한 연구 및 기술개발은 꾸준히 진행되어 왔으나 보수재료와 기술의 정확성 및 실효성 검증은 크게 이루어지지 않았다. 따라서 본 연구에서는 다양한 제조사의 보수재료에 관하여 재료 성능 평가를 수행하였고, 이를 바탕으로 균열과 가장 밀접한 공법에 사용되는 함침제와 에폭시를 적용 하여 탄산화, 염해, 동결융해에 대하여 내구성능 평가를 수행한다. 이 결과 탄산화와 염해는 대략 2배의 성능 개선과 동결융해의 경우 5 %의 보수 성능 향상을 나타낸다. 이처럼 추구 구조물 보수 시 환경적, 화학적 요인에 따라 적절한 보수를 실시한다면 철근 부식을 방지하는데 효과적일 것으로 판단된다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.477-480
• /
• 2000

It is useful way to make indentations near crack tip in order to increase fatigue life or repair a fatigue crack. In this study, bending fatigue tests were performed to investigate the optimal position of the indentations near crack tip. The results shows that fatigue life of the specimen is dramatically increased by indentation and the most effective location is the back of the crack tip.

• 콘크리트학회논문집
• /
• 제14권6호
• /
• pp.805-812
• /
• 2002

건설된지 오래되어 보강이 필요한 구조물이 증가하고 있다. 이런 구조물들은 현재 상태에 대한 정확한 평가가 있어야만 보강여부 및 보강 방법 등을 결정할 수 있다. 따라서 손상정도를 평가하는 객관적인 방법이 절실히 필요하나, 균열이나 처짐과 같이 관측이 용이한 구조물의 변화 특성을 이용하여 기존 구조물의 손상 상태를 평가하는 연구가 지금까지는 거의 없는 상태이다. 본 연구에서는 하중의 증가에 따른 균열 특성을 측정, 분석하고, 균열 특성 값과 실 구조물의 손상상태, 또는 재하 상태와의 상관관계를 규명하기 위하여, 11개의 실험체를 대상으로 다양한 균열 특성 값을 측정, 도출, 분석하였다. 본 연구에서 검토된 균열 특성 값에는 균열 개수, 균열 길이, 균열 범위, 균열 간격, 최대 균열길이, 균열 면적, 평균 균열길이 등이 검토되었다. 분석결과는 항복 하중시 측정된 처짐 값을 기준으로 각각 하중 단계별 처짐 값을 백분율로 명시한 상대 처짐 값과 표준화된 균열 특성 값의 상관관계를 규명하였다. 이렇게 표준화된 여러 개의 균열 특성 값 중 균열 간격, 균열 면적, 균열 범위, 최대 균열길이 등의 상대 처짐 값과의 상관관계가 밀접한 것으로 나타났다. 따라서, 실 구조물에서도 균열을 측정하여 표준값을 찾아내면, 그 구조물에 작용하는 하중의 크기나 과거에 받았던 최대 하중의 크기를 추정하는데 사용될 수 있을 것으로 기대된다. 구조물의 손상단계를 보다 신뢰성 높게 추정하기 위해서는 실험체의 제원, 콘크리트 및 철근의 강도, 철근비 등의 다양한 변수가 앞으로도 계속 연구되어야 할 것이다.

• 국제강구조저널
• /
• 제18권4호
• /
• pp.1284-1296
• /
• 2018

Carbon fiber reinforced polymer (CFRP), plates bonding repair method is one of the simple repair methods for cracked steel structures. In this study, the influence of width of CFRP plates on bending fatigue life of out-of-plane gusset joint strengthened with CFRP plates was investigated from the experimental and numerical point of view. In the bending fatigue test of cracked out-of-plane gusset joint strengthened with CFRP plates, the effect of width of CFRP plates on crack growth life was clarified experimentally. Namely, it was revealed that the crack growth life becomes larger with increasing the width of CFRP plates. In the numerical approach, the stress intensity factor (SIF) at the surface point of a semi-elliptical surface crack was estimated based on the linear fracture mechanics. Furthermore, the extended fatigue life of cracked out-of-plane gusset joint strengthened with CFRP plates was evaluated by using the estimated SIF at the surface point and the empirical formula of the aspect ratio of semi-elliptical crack. As the results of numerical analysis, the estimated fatigue life of the specimen strengthened with CFRP plates showed the good agreement with the test results.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2002년도 학술.기술논문발표회
• /
• pp.43-48
• /
• 2002

Since the basement building like the communication hole and etc. is built under the ground where it is pressed by the water, the leakage happens due to the dried-shrinking crack, the sinking crack, the creation of the work-joint of the building and etc. caused by the character of the material and construction way of the reinforced concrete building. Especially, a lot of repair for the leakage cannot help but being taken in temporary way without any noticeable countermeasure. Therefore, this kind of repair is socially criticized many times that this is defective construction even if this costs a lot. The fundamental reason of the above mentioned symptoms can be found in the creation of the work-joint caused by the character of the concrete building, the limitation of the physical performance of the existing water-proof and repair material, the limitation of the construction, the limitation of the physical sustaining performance of the concrete building, the limitation(heat-injury, deterioration) of the constancy of the durability caused by aging and etc. Therefore, in this study, we would like to present the better understanding on the water-proof seal relating to the application at the spot and its test evaluation related data since the necessity of the establishment of the quality control standard and the performance testing way on the relevant water-proof seal is rising a lot to regulate the water-proof technology and the leakage repair technology in accordance with the growth of the demand on the facility.