• 제목/요약/키워드: crack width

검색결과 646건 처리시간 0.036초

미세균열이 콘크리트의 염소이온 침투에 미치는 영향: 현상학적 모델 (Effect of Micro-Cracks on Chloride Ions Penetration of Concrete: Phonomenological Model)

  • 윤인석
    • 콘크리트학회논문집
    • /
    • 제19권1호
    • /
    • pp.57-65
    • /
    • 2007
  • 지난 수년간 콘크리트의 염소이온 침투와 유관되어 실험 방법론 및 해석적 모델 기법의 개발에 많은 발전이 있어 왔다. 그러나 실제 콘크리트 구조물에는 다소의 균열이 존재하며 이는 장기 내구성에 큰 영향을 줄 수 있음에도 불구하고 대부분의 연구들은 비균열의 콘크리트를 대상으로 연구되어 온 문제점이 있었으며 균열이 존재하는 콘크리트의 염소이온 침투에 대한 연구는 매우 드문 실정이다. 염소이온 침투에 대한 균열폭의 임계치는 유지관리 차원에서 필요하지만, 대부분 콘크리트 코드는 사용성의 견지에서 허용 균열폭을 보편적인 값 0.3mm로 제안하고 있을 뿐, 염소이온 침투 및 내구성의 견지에서 임계 균열폭에 대한 규정도 부재한 실정이다. 이미 제안된 값도 연구자들마다 상이하여 논란의 여지가 있다. 본 연구는 임계 균열폭의 도출을 목적으로 균열이 콘크리트의 염소이온 침투에 미치는 영향을 고찰하였다. 실험적 방법으로 다양한 균열폭과 균열 깊이를 실험 변수로 하여 급속 염소이온 침투 실험 (RCMT)를 행하였다. 한편, 임계 균열폭이 갖는 공학적 의미를 설명하고자, 균열폭에 따른 염소이온 침투의 현상학적 모델이 제안되었다. 즉, 균열된 콘크리트는 3 구간으로 나누어지며 내부 안쪽으로 들어갈수록 확산자유 영역, 확산경화 영역, 순수 확산 영역의 3가지 구간이 존재한다. 이는 균열폭에 따른 염소이온 확산계수를 산출하기 위한 해석적 방법론의 개발에 이용될 수 있을 것으로 사료된다.

콘크리트 구조물 균열에 에폭시 주입의 표준화를 위한 기초적 연구 (A Basic Study on the Standardization of Epoxy Injection on Concrete Structure Crack)

  • 백종명;장석재
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제10권1호
    • /
    • pp.115-122
    • /
    • 2006
  • 현재 콘크리트 구조물의 보수에서 품질의 검사 기준이 없는 상태에서, 단순한 경험에 의한 보수는 문제점을 가지고 있다. 이 문제점을 개선하기 위하여 이 논문은 균열폭과 주입량, 균열폭과 주입시간, 균열폭과 주입압력, 균열폭과 주입압력과 주입시간, 구조물 규모와 주입량, 구조물 별 균열 위치와 주입량, 균열폭 및 구조물 두께와 주입시간과의 관계를 분석하였다. 분석한 결과에서 얻은 자료는 콘크리트 구조물의 보수에 대한 체계적인 품질관리에 도움이 될 것이라 생각한다.

콘코리트 중의 염화물 침투에 영향을 미치는 균열폭에 대한 고찰 (The Investigation of Crack widths for the Effect of Cracks on Chloride Penetration of Concrete)

  • 윤인석
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2006년도 추계 학술발표회 논문집
    • /
    • pp.945-948
    • /
    • 2006
  • Chloride penetration into concrete is a hot issue of concern all over the world, notwithstanding, very few attempts have been conducted to explore the effect of cracks on choride penetration. Cracks provoke to lose a main function of watertightness of concrete and lead to reduce the service life of concrete. For this reason, it is necessary to define a critical crack width to prevent a quick chloride penetration through crack. In this study, experiment is focused on establishing a critical crack width in terms of chloride penetration. Concrete specimens with different crack widths I crack lengths have been subjected to rapid chloride migration testing. In a side of analytical solution, a simple approach to quantify the chloride diffusion coefficient of only crack zone excluding sound concrete was proposed. The result clearly showed a critical crack width of 0.03 mm. Based on the experimental results, a phenomenological model was proposed to explain the meaning of critical crack width in practical engineering. In this model, cracked concrete zone was divided into three zones. These zones corresponded to a wide crack, a zone with micro-cracks and an uncracked zone.

  • PDF

철근콘크리트 부재의 손상량 평가 모델에 관한 연구 (Study on Damage Evaluation Model for Reinforced Concrete Members)

  • 조병민;;김태진
    • 한국지진공학회논문집
    • /
    • 제19권2호
    • /
    • pp.75-83
    • /
    • 2015
  • The purpose of this study is to improve the previous damage evaluation model for RC members which is proposed by Igarashi[1] in 2010.The previous model was not confirmed by enough data of damage such as, residual crack length, width and area for exfoliation of concrete, etc. In addition, validation of the model is still insufficient. Therefore, experiment of a real-scale RC structure and experiment of RC columns using the high-strength concrete were conducted to gather the data of damage in RC members. The investigation has been conducted gathering the data not only additional experiments data but also existing data for modification of damage evaluation model. It has been investigated on changing damage in RC due to axial force ratio, shear reinforcement and shear span ratio. As a result, several problems were founded in the previous model, such as, hinge length($l_p$), spacing of flexural crack($S_{av,f}$), total width of flexural cracks regulated by maximum width of flexural crack($n_f$) and total width of shear cracks regulated by maximum width of shear crack($n_s$). New model is proposed and evaluated the damage properly.

염해환경에서의 RC보의 허용 균열폭 산정에 관한 연구 (A Study on the Allowable Crack Width of RC Beam with Corrosive Environment)

  • Kim, Dongbaek;Kwon, Soondong;An, Kwanghee
    • 한국재난정보학회 논문집
    • /
    • 제11권2호
    • /
    • pp.253-261
    • /
    • 2015
  • 콘크리트에 발생하는 균열은 구조물의 진행성 파괴로 연결되어 구조물의 안전성에 직결되는 문제이며, 철근콘크리트 구조물에 발생한 균열은 사용성 뿐만 아니라 유해물질의 침입에 따른 열화를 촉진하여 내구성 문제와 직결된다. 특히 외부 염화물 이온의 침입에 따라 철근에 발생하는 부식은 철근콘크리트 구조물의 안전성에도 큰 영향을 미친다. 따라서, 콘크리트의 균열을 제어하기 위해 초기재령 콘크리트에서의 수화, 수분이동을 규명하여 안전성 및 내구성을 확보하기 위해 허용 균열폭을 합리적으로 산정하는 방법이 필요하다. 본 연구에서는 철근콘크리트 구조물의 철근부식에 영향을 미치는 영향인자를 분석하고 부식영향인자의 변화에따른 부식의 정도를 파악할 수 있는 철근콘크리트 보를 제작하여 실험을 실시한다. 이러한 실험의 결과를 이용하여 부식영향인자를 고려한 허용 균열폭에 대한 식을 제안한다.

섬유보강 복합체의 균열면 해석을 위한 수정 미세역학 모델 (Modified Micro-Mechanical Fiber Bridging Model for Crack Plane of Fiber Rreinforced Cementitious Composite)

  • 신경준;박종범
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
    • /
    • pp.365-368
    • /
    • 2006
  • In this paper, the post cracking stress-crack width relationship of the composite is studied from a micromechanics points of view. Cook-Gordon debonding effect is studied by more refined method with considering of chemical friction of fiber interface. As a result, fiber with pre-debonding length retards stress development and shows more wide crack width for the same force level. longer pre-debonding length and lower pre-debonding bond strength results in lower full-debonding force, but same crack width.

  • PDF

Crack-controlled design methods of RC beams for ensuring serviceability and reparability

  • Chiu, Chien-Kuo;Saputra, Jodie;Putra, Muhammad Dachreza Tri Kurnia
    • Structural Engineering and Mechanics
    • /
    • 제82권6호
    • /
    • pp.757-770
    • /
    • 2022
  • For the design of flexural and shear crack control for reinforced concrete (RC) beams related to serviceability and reparability ensuring, eight simply-supported normal-strength reinforced concrete (NSRC) beam specimens are tested and the existing high-strength reinforced concrete (HSRC) experimental data are included in the investigation of this work. According to the investigation results of flexural and shear cracks, this works modifies the existing design formulas to determine the spacing of the tensile reinforcement for the flexural crack control of a HSRC/NSRC beam design. Additionally, for a specified shear crack width of 0.4 mm, the allowable stresses of the shear reinforcement are also identified. For the serviceability and reparability ensuring of HSRC/NSRC beams, this works proposes the relationship curves between the maximum flexural width and allowable stress of the tensile reinforcement, and the relationship curves between the shear crack width and allowable shear force that can be used to do the crack width control directly.

Analytical solutions for crack initiation on floor-strata interface during mining

  • Zhao, Chongbin
    • Geomechanics and Engineering
    • /
    • 제8권2호
    • /
    • pp.237-255
    • /
    • 2015
  • From the related engineering principles, analytical solutions for horizontal crack initiation and propagation on a coal panel floor-underlying strata interface due to coal panel excavation are derived in this paper. Two important concepts, namely the critical panel width of horizontal crack initiation on the panel floor-underlying strata interface and the critical panel width of vertical fracture (crack) initiation in the panel floor, have been presented. The resulting analytical solution indicates that: (1) the first criterion can be used to express the condition under which horizontal plane cracks (on the panel floor-underlying strata interface or in the panel floor because of delamination) due to the mining induced vertical stress will initiate and propagate; (2) the second criterion can be used to express the condition under which vertical plane cracks (in the panel floor) due to the mining induced horizontal stress will initiate and propagate; (3) this orthogonal set of horizontal and vertical plane cracks, once formed, will provide the necessary weak network for the flow of gas to inrush into the panel. Two characteristic equations are given to quantitatively estimate both the critical panel width of vertical fracture initiation in the panel floor and the critical panel width of horizontal crack initiation on the interface between the panel floor and its underlying strata. The significance of this study is to provide not only some theoretical bases for understanding the fundamental mechanism of a longwall floor gas inrush problem but also a benchmark solution for verifying any numerical methods that are used to deal with this kind of gas inrush problem.

터널 콘크리트 구조물 균열에 에폭시 주입의 표준화에 대한 기초적 연구 (A basic study on the standardization of epoxy injection in cracks of tunnel concrete structures)

  • 백종명;장석재
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2005년도 추계학술대회 논문집
    • /
    • pp.1235-1240
    • /
    • 2005
  • In this status no inspection standard of quality in repair of present concrete structure has a problem to repair for simple experience. In this paper for this problem improvement, it made an analysis of relation to injection quantity of crack width, injection time of crack width, injection pressure of crack width, injection pressure and time, injection quantity of structural size, injection quantity of structural individual crack position, injection time about crack width. and structural thickness. The data gained in analysis result be judged that it will help in systematic quality control about concrete structural repair.

  • PDF

철근 콘크리트부재에서 최소균열간격을 이용한 최대균열폭 산정 (Estimation of Maximum Crack Width Using Minimum Crack Spacing in Reinforced Concrete)

  • 고원준;양동석;장원석;박선규
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2001년도 봄 학술발표회 논문집
    • /
    • pp.903-908
    • /
    • 2001
  • This paper deals with the estimation of the maximum flexural crack widths using minimum crack spacing for reinforced concrete members. The proposed method utilizes the conventional crack and bond-slip theories as well as bonding transfer length and effects of creep and shrinkage between the reinforcement and concrete. An analytical equation for the estimation of the maximum flexural crack width is formulated as a function of mean bond stress. The validity, accuracy and efficiency of the proposed method are established by comparing the analytical results with the experimental data and the major code specifications (e.g., ACI, CEB-FIP Model code, Eurocode 2, etc.). The analytical results of analysis presented in this paper indicate that the proposed method can be effectively estimated the maximum flexural crack width of the reinforced concrete members.

  • PDF