• Journal of Mechanical Science and Technology
• /
• 제14권10호
• /
• pp.1041-1050
• /
• 2000

In this paper the effect of specimen thickness on fatigue crack growth with the spatial distribution of material properties is presented. Basically, the material resistance to fatigue crack growth is treated as a spatial stochastic process, which varies randomly on the crack surface. The theoretical autocorrelation functions of fatigue crack growth resistance with specimen thickness are discussed for several correlation lengths. Constant ${\Delta}K$ fatigue crack growth tests were also performed on CT type specimens with three different thicknesses of BS 4360 steel. Applying the proposed stochastic model and statistical analysis procedure, the experimental data were analyzed for different specimen thicknesses for determining the autocorrelation functions and probability distributions of the fatigue crack growth resistance.

• Journal of Welding and Joining
• /
• 제28권3호
• /
• pp.79-85
• /
• 2010

Hardfacing is one of the frequently applying method to increase surface hardness in hot forging die. Recently, hardfacing receives great attention due to it's repair availability and low cost. In hot forging die, crack resistance and thermal shock resistance have been considered as major properties, However there are few studies for the assessment of these properties. So, it is necessary to establish the assessment method for crack resistance and thermal shock resistance in hardfacing for hot forging die. In this study, flux cored arc welding was applied to make hardfacing welds. Three point bending test was carried out to assess hardfacing weld's crack resistance, and high temperature bending test using salt bath was developed for thermal shock resistance. Consequently, it was possible to assess crack resistance and thermal shock resistance of hardfacing welds for hot forging die quantitatively.

• 한국해양공학회지
• /
• 제8권2호
• /
• pp.47-55
• /
• 1994

The purpose of the present study is to investigate the effect of specimen thickness on statistical properties of crack growth resistance. In this study, the resistance S$\delta$$_h$(x) to fatigue crack growth was treated as a spatial stochastic process. which varies randomly on the crack surface. The theoretical autocorrelation functions of the resistance to fatigue crack growth considering specimen thickness are discussed for several correlation lengths. The main results obtained are : (1) The theoretical autocorrelation functions of S$\delta$$_h$(x) are almost independent of specimen of specimen thickness except for the origin. (2) The variance increases with decreasing specimen thickness.

• Elastomers and Composites
• /
• 제41권2호
• /
• pp.79-87
• /
• 2006

내소음성과 내균열성을 가진 고무재료의 개발을 목적으로 NBR에 oleamide와 아라미드를 첨가하여 함량에 따른 가황특성, 물리적 성질, 내열성, 내유성, 내마모성, 내균열성 및 내소음성을 조사하였다. 가황특성과 Mooney 점도를 측정한 결과, 미가황고무의 가황특성은 oleamide의 양이 증가할수록 torque가 감소하였다. oleamide의 함량이 3 phr까지 증가함에 따라 경도 및 모듈러스 값은 조금씩 감소하였고 신장률은 감소하는 경향을 나타내었으며 인장강도는 거의 변화가 없었다. 내열성 시험(70시간, $120^{\circ}C$) 및 내유성 시험(70시간, $40^{\circ}C$)을 수행한 결과. 인장강도와 신장률이 모두 감소하였으며, TGA/DSC 분석 결과 첨가제에 따른 배합고무재료의 열적특성은 변화가 없었다. 기본물성, 내마모성, 내소음성 및 내균열성을 종합한 결과, NBR 227001 고무재료에서 내마모성과 내소음성에 대한 oleamide의 최적배합비는 3 phr였으며, 내균열성에 대한 아라미드의 최적배합비는 1 phr로 나타났다.

• 콘크리트학회논문집
• /
• 제18권4호
• /
• pp.553-558
• /
• 2006

본 연구에서는 배합강도 30MPa로 설계된 25-30-18 규격의 콘크리트 배합에 불소화합물 및 실리카로 구성된 불소-실리카 복합형 균열저감제(FS)를 시멘트 중량을 기준으로 0.5% 간격으로 2.0%까지 첨가한 후 슬럼프 경시 변화, 공기량 경시 변화 및 블리딩 등의 굳지 않은 콘크리트의 재료특성을 평가하였다. 또한, 콘크리트 수화온도 변화에 미치는 영향과 소성수축 및 건조수축의 저항성에 미치는 효과를 파악하였다. FS가 첨가된 콘크리트의 재료특성에서 슬럼프 및 공기량 경시 변화는 무첨가 콘크리트에 비해 큰 차이가 없었으나 블리딩과 수화온도는 저감되는 것으로 나타났다. 특히, 경화 전 후 소성수축 및 건조수축에 기인된 콘크리트의 수축균열 저항성이 FS를 $1.0{\sim}1.5%$의 첨가함으로써 크게 저감됨을 알 수 있었다.

• Elastomers and Composites
• /
• 제33권5호
• /
• pp.335-344
• /
• 1998

본 연구에서는 군용 전투차량 궤도 패드용으로 사용되는 고무 배합물의 내크랙성 향상을 위해 기계적 물성이 우수한 천연고무를 이용하여 크랙 개시 저항성 즉, 인열 에너지와 크랙성장 저항성인 크랙 성장 속도를 평가하였다. 내크랙성에 영향을 주는 인자는 여러 가지가 있으나, 본 실험에서는 주로 충전제인 카본블랙과 가교 시스템을 평가하였다. 본 연구결과 촉진제의 함량이 황의 함량과 동일 할 때 내크랙성이 가장 우수하였다. 또한 카본블랙은 보강성이 우수한 hard black의 일종인 ISAF (N220)가 강도 및 가공성에서 가장 우수한 것으로 평가되었으며 적정 함량은 50phr이었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 학회창립 10주년 기념 1999년도 가을 학술발표회 논문집
• /
• pp.593-596
• /
• 1999

Steel fibers are added to concrete to improve energy absorption, impact resistance and apparent ductility, and to provide crack resistance and crack control. This study is to investigate the toughness index and post-crack equivalent tensile strength of steel fiber reinforced concrete properties on the load-deflection behaviors of the steel fiber reinforced concrete beam model specimens.

• 펄프종이기술
• /
• 제41권1호
• /
• pp.30-36
• /
• 2009

Cracking of scored or creased lines on boards is a serious problem in converting process of corrugated fiberboard. It is important to reduce the possibility of score crack in advance by controlling the related quality factors of linerboard. To find out the key properties affecting score crack, we carried out the correlation analysis between score crack and physical properties of linerboards. Score crack was evaluated by visual rating on surface crack after folding a linerboard using laboratory folding resistance tester. Thickness of linerboard was the most important factor to score crack. The critical limits of thickness and strain can be determined by correlation analysis for reducing the possibility of score crack.

• Nuclear Engineering and Technology
• /
• 제53권6호
• /
• pp.1924-1930
• /
• 2021

By using miniature SENB specimens, the fracture properties of the materials in the region of welded metal, 321 stainless steel heat affected zone, 690 alloy heat affected zone of 321/690 dissimilar metal girth welded joints were tested. Both the J-resistance curves and critical fracture toughness of the three different materials are affected by the crack size because of the effect of crack tip constraint. Groups of constraint corrected J-resistance curves of the three materials are obtained according to J-Q-M approach. The welded metals exhibit the best fracture resistance but the worst fracture resistance is observed in the material of 690 alloy heat affected zone.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1581-1583
• /
• 1999

Epoxy Compound has been used as insulation material in cable accessories. During the applying voltage to cable, heat shock is induced to accessory by the temperature difference between atmosphere and conductor. In this study, crack resistance, thermal and mechanical properties were evaluated about conventional epoxy compound and rubber toughened epoxy compound. Because rubber absorbs the stress caused by heat shock, crack resistance of rubber toughened epoxy compound is high. In the case of low thermal expansion coefficient, the compound shows high crack resistance because of low volumetric change.