• 한국도로학회논문집
• /
• 제9권2호
• /
• pp.39-49
• /
• 2007

본 연구는 연속철근콘크리트포장(CRCP)에 환경하중이 작용하여 횡방향 균열이 발생하고 진전되어가는 과정을 분석하기 위하여 수행되었다. 이러한 분석을 위하여 CRCP의 유한요소 모델을 개발하고 균열의 발생과 진전을 예측할 수 있는 요소삭제 방법을 도입하였다. 여러 다른 형태의 환경하중이 작용할 때 CRCP의 거동 및 균열 진전 특성을 분석하기 위하여 세 가지의 경우를 고려하였다. 먼저 CRCP의 콘크리트 슬래브 상부 표면과 하부 표면의 온도차가 선형으로 유지되면서 깊이에 관계없이 일정하게 온도가 계속 떨어지는 경우이다. 다음으로 슬래브 하부의 온도는 일정하게 유지되며 상부의 온도만 감소하는 경우이다. 이 경우는 슬래브 상하부의 온도차가 계속 증가되는 경우라 할 수 있다. 또 다른 경우는 슬래브의 중간 깊이에서 하부까지는 같은 온도가 유지되고 슬래브 상부의 온도만 계속 감소하는 경우이다. 해석 결과 CRCP의 균열발생 및 깊이 방향으로의 진전정도는 환경하중의 형태에 따라 크게 좌우되는 것을 알 수 있었으며 균열의 발생 및 진전에 따른 CRCP의 응력 및 변위의 재분포 과정도 분석할 수 있었다.

• 대한기계학회논문집
• /
• 제10권2호
• /
• pp.188-197
• /
• 1986

본 연구에서는 응력이 변동되는 경우 내부크랙 전파특성을 중심으로 내부크랙 전파거동을 표면크랙 전파거동과 비교 검토하였다.

• 수산해양기술연구
• /
• 제34권1호
• /
• pp.30-36
• /
• 1998

Recently, with rapid increase of gas demand, there occurs much interest their security of safety in the gas storage tanks and pressure vessels etc. In order to solve the problems, the occurrence of corrosion fatigue crack and the propagation behavior must be investigated. Especially the occurrence of corrosion fatigue crack and the propagation behavior in the part which has concentrated stress or defects, must be studied more carefully. In this paper, the high-tensile steel of SPV 50 which is much used for building the LPG storage tanks was tested by the use of a plane bending corrosion fatigue tester under the various marine environments and in the air. These experiments were done to investigate the corrosion fatigue crack propagation behavior, the variation of aspect ratio for part through crack and electro-chemical characteristics of the metal. The main results obtained are as follows ; 1. Comparing the same surface crack length with the crack depth, the crack depth toward the thickness of specimen in air propagated faster than that in corrosion environment. 2. The aspect variation of the half elliptical crack can be estimated as following equation; b/a=i-jb/t where a : surface crack length, b : crack depth, t : specimen thickness, i,j : experimental constants but the slope j is decreased as specific resistance decreases. 3. As the specific resistance of corrosion environment decrease or the corrosion fatigue crack propagates, the corrosion potential become less noble.

• 한국철도학회논문집
• /
• 제9권6호
• /
• pp.657-663
• /
• 2006

By measuring concrete temperature and strains of concrete and reinforcing bars throughout gages embedded and also by observing the crack occurrence, this study aims at the characteristics of structural behavior of subway wall structure in associate with concrete ages. The length of 23.5m, thickness of 2.0m of real subway custody line was selected as a representative structure and 7 thermocouples and 6 strain gages were installed to measure the behavior of wall structure. The results were compared and verified with analytical results using MIDAS in order to show their usefulness. It was found that only attachment of strain gages on the surface of reinforcing bars can figure out the timing of crack occurrence and hydration heat program is useful to estimate comparatively exact magnitudes of temperature. Since estimated time of crack occurrence throughout thermal stress analysis depends on the period of transferred thermal stress from concrete to reinforcing bars, however, cracks from naked eyes were identified later than analytical results. Cracks were observed first at the center of wall line and then to the end of line symmetrically.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2003년도 학술.기술논문 발표회
• /
• pp.1-4
• /
• 2003

Recently, a structure has been larger and higher under the improvement of construction technique. So, a concrete constructions that a mat foundation thickness of structure is over 80cm have been many. Also, because of the reason high strength concrete, the matter of thermal crack have become an important task to be solved absolutely. In a cause a thermal crack occurrence, there used, mixture of concrete, construction and so forth. In this study, we executed temperature and stress analysis of mat foundation to know the effect the construction condition a thermal crack of mat foundation. And we evaluated quantitatively about the occurrence possibility of thermal crack using the hydration heat analysis program. By using of this analysis technique, will can control skilfully the quality of a mat foundation in advance.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2003년도 학술.기술논문발표회
• /
• pp.1-4
• /
• 2003

Recently, a structure has been larger and higher under the improvement of construction technique. So, a mass concrete constructions that a mat foundation thickness of structure is over 80cm have been many. Also, because of the reason of high strength of concrete, the matter of thermal crack have become an important task to be solved absolutely. tn a cause of a thermal crack occurrence, there are material used, mixture of concrete, construction condition and so forth. In this study, we executed temperature and stress analysis of mat foundation to know the effect of the construction condition on a thermal crack of mat foundation. And we evaluated quantitatively about the occurrence possibility of thermal crack using the hydration heat analysis program. By using of this analysis technique, we will can control skilfully the quality of a mat foundation in advance.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.17-20
• /
• 2005

Moment-curvature relation of RC pier is influenced greatly in occurrence form of crack and difference is happened according to consideration existence and nonexistence of tension stiffening effect. However, studies considering these is very insufficient misgovernment. Also, it is sometimes unavoidable lap splice of axial reinforcement in plastic hinge region of RC piers. However, specific design standard about lap splice of axial reinforcement is unprepared real condition and study about effect that lap splice of axial reinforcement get in occurrence form of crack is insufficient misgovernment. Therefore, in this paper, experiments are performed with hollow RC piers that do lap splice of axial reinforcement by main variable. And this study present analytical method about moment-curvature relation of hollow RC pier that consider tension stiffening effect and analyze effect that lap splice of axial reinforcement gets in occurrence form of crack. Analytic method of moment-curvature relation of RC pier that present in this study shows very similar motion with experiment result and crack interval of RC pier is suffering dominate impact in the augmented reinforcement amount by lap splice and average crack interval decreases as lap splice ratio increases.

• 한국안전학회지
• /
• 제34권4호
• /
• pp.15-21
• /
• 2019

In order to secure the safety of various machinery, it is very important to develop a technique for accurately and quickly measuring the cracks generated in the mechanical equipment and evaluating the mechanical characteristics. The evaluation of the mechanical properties is accompanied by an appropriate strain measurement according to the material and crack occurrence of the target structure. Especially, when micro cracks are generated, the evaluation method is very important. Digital image correlation is an optical full field displacement measuring method which is using currently with speckles in the interested area. However the evaluation method and conditions of image distributions have to be considered carefully to measure the crack occurrence because the images of the speckle patterns affect the quality of displacement results. In this study, the speckle pattern density is characterized to improve the accuracy of the measurement method. And also the micro crack initiation is detected by the measured displacement in the adopted speckle pattern distribution. It is shown that the proposed method is useful to determine the density pattern distribution for the accurate measurement and crack detection.

• Journal of Welding and Joining
• /
• 제23권3호
• /
• pp.68-75
• /
• 2005

The fatigue life of welded joints is associated with crack initiation and propagation life. Theses cannot be easily separated, since the definition of crack initiation is vague due to the initiation of multiple cracks that are distributed randomly along the weld toes. In this paper a method involving a notch strain and fracture mechanical approach, which considers the characteristics of welded joints, e.g. welding residual stress and statistical characteristics of multiple cracks, is proposed, in an attempt to reasonably estimate these fatigue lives. The fatigue crack initiation life was evaluated statistically, e.g. the probability of failure occurrence in 2.3, 50 and $97.7\%$, in which the cyclic response of the local stress/strain hi the vicinity of the weld toes and notch factors derived by the irregular shape of the weld bead are taken into account. The fatigue crack propagation life was simulated by using Monte-Carlo method in consideration of the Ad-factor and the mechanical behavior of mutual interaction/coalescence between two adjacent cracks. The estimated total fatigue life, $(N_T)_{P50\%}$, as a sum of crack initiation and propagation life under the probability of failure occurrence in $50\%$ showed a good agreement with the experimental results. The developed technique for fatigue lift estimation enables to provide a quantitative proportion of crack initiation and propagation life in the total fatigue life due to the nominal stress range, ${\Delta}S$.

• 한국산학기술학회논문지
• /
• 제19권5호
• /
• pp.611-617
• /
• 2018

대형구조물의 효과적인 구조 안전성 확보를 위해서는 결함탐지기술을 포함한 건전성 모니터링의 적용이 필요하다. 본 연구에서는 보 구조물에 발생하는 균열위치와 균열크기를 추정하기 위하여 다음과 같은 2단계의 균열추정방법을 제안한다. 우선, 보 구조물의 분포 국부 변형률 계측결과를 이용하여 변형률 모드형상을 구하고, 이에 대한 수정 라플라시안(Laplacian) 연산을 통하여 균열발생 영역을 추정한다. 이후, 가속도 측정을 통하여 구한 고유주파수와 신경망기법을 이용하여, 미리 추정된 균열발생 영역을 대상으로 균열위치와 균열크기를 추정한다. 이때, 신경망을 훈련시키기 위하여, 에너지법에 의해 유도된 균열보의 등가휨강성을 이용하여 균열보의 고유주파수를 해석적으로 구한다. 기법을 검증하기 위하여 알루미늄 캔틸레버 보에 대한 손상실험을 수행하였다. 인위적으로 실험체에 균열을 가한 후 자유진동실험을 수행하여 동적 변형률과 가속도를 계측하고 이를 이용하여 변형률 모드형상과 고유주파수를 구하였다. 변형률 모드형상에 대한 수정 라플라시안 연산을 통하여 균열발생 영역을 추정하고, 고유주파수와 신경망기법을 이용하여, 미리 추정된 균열발생 영역에 대하여 균열위치와 균열크기를 판정하였다. 3가지 손상경우에 대한 균열발생 영역의 추정결과는 실제 영역과 잘 일치하였으며, 균열위치와 균열크기 추정결과의 정확성을 상당히 향상시킬 수 있었다. 제안된 기법은 장대구조물에 대한 구조물 건전성 모니터링에 효과적으로 활용될 수 있을 것으로 판단된다.