• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.3
• /
• pp.409-415
• /
• 2008

This paper proposed a new optimal design method of the electronic ballast with stable run-up current for Metal Halide lamp during the ignition condition. In order to avoid operation in the acoustic resonance frequency band and to supply the optimal ignition current without demage of inverter switching components during the ignition period, the values of the series inductor Ls, the series capacitor Cs, and the parallel capacitor Cp were determined by analysis of characteristics of inverter transfer function depend on Lamp operating power and resistance of ignition condition and steady state operating condition. For the prototype ballast for a 400W Metal Halide Lamp, experimental results are presented in order to validate the proposed method.

• Progress in Superconductivity
• /
• v.10 no.2
• /
• pp.79-86
• /
• 2009

We successfully fabricated C-doped ex-situ $MgB_2$ wires using two different methods such as mechanical alloying(MA) and combined process(CP) of in-situ and ex-situ. In the MA, the precursor powder was prepared with a mixture of $MgB_2$ and 1 at% C powders by planetary ball milling for 0-100 h. In the CP, on the other hand, C-doped $MgB_2$ powder was prepared with Mg, B, and C powders by in-situ process via compaction, sintering, and crushing. The powders prepared by two methods were loaded into Fe tube and then the assemblages were drawn by a conventional powder-in-tube technique. The MA treatment of C-added $MgB_2$ decreased the particles/grains size and resulted in C-doping into $MgB_2$ after sintering, improving the critical current density($J_c$) in high external magnetic field. For the C-doped $MgB_2$ wire by MA for 25 h, the $J_c$ was $4.1{\times}10^3A/cm^2$ at 5 K and 6.4 T, which was 5.9 times higher than that of pure and untreated $MgB_2$ wire. The CP also provided C-doping into $MgB_2$ and improved the $J_c$ in high magnetic field; the C-doped $MgB_2$ wire fabricated by CP exhibited a $J_c$ being 2.3 times higher than that of the ex-situ wire used commercial $MgB_2$ powder at 5 K and 6.0 T($2.7{\times}10^3A/cm^2\;vs.\;1.2{\times}10^3A/cm^2$).

• Fire Science and Engineering
• /
• v.33 no.2
• /
• pp.145-154
• /
• 2019

The purpose of this study is to analyze the self-status of fire service personnel to identify their effect on self-efficacy and job satisfaction, and to improve the performance of their tasks in the field and perform their tasks efficiently. A survey of 177 current firefighters in the southern city of Gyeonggi Province conducted a correlation analysis and regression analysis through SPSS 22.0. The first study found that in relation to the self-status factor and the self-efficacy factor of firefighting services, the self-efficacy is rather high and the self-regulating effect is very high. Second, the effects of the self-status factor on the self-efficacy were significant in order of type Adult (A), type Free Child (FC), and type Adapted Child (AC). Third, analysis of correlation between self-status factors and job satisfaction factors showed inadequate correlation in all job satisfaction factors for Critical Parent (CP) types, and static correlation in all job satisfaction for Nurturing Parent (NP) types. Type Adapted Child (AC) was less satisfying to itself, to itself, to pay, to promote, to co-workers. Thus, the current strategic approach based on rationality needs to be strengthened by lowering the authority of the Critical Parent (CP) function in terms of self-status factors and enhancing the Adapted Child (AC) function in the lower satisfaction level of the parent.

• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.327-330
• /
• 2003

A novel compact circular polarization operation of the microstrip antenna with four-slits and T-slits is proposed. The mechanism for compact size antenna is investigated with the behavior of the currents on the radiating patch. The equivalent surface current path due to the slits is lengthened, reducing the resonant frequency at a fixed patch size. The proposed compact CP design can have an antenna size reduction of about 33 ∼ 45％ as compared to the conventional microstrip antenna. Details of the experimental and measured results are presented and analysed.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.447-448
• /
• 2019

본 논문은 다양한 전기 자동차의 배터리 전압을 위해 150V-1000V의 넓은 출력전압을 만족하고 전기자동차의 수요자원화를 위해 양방향 제어가 가능한 DC-DC 컨버터를 제안한다. 제안하는 컨버터는 절연형 컨버터와 비절연형 컨버터가 결합된 2단 방식의 구조로 연결된 배터리의 전압에 따라 CC(Constant Current) 또는 CP(Constant Power)로 동작한다. 전체시스템은 20kW급으로 설계하여 시뮬레이션 및 시제품을 통해 출력특성 및 효율을 분석하였다.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2008.05a
• /
• pp.47-70
• /
• 2008

Cost efficiency is today the primary requirement in the paper and board industry. This has led therefore, to a greater preponderance of products with specifically designed functionality to take account of current industry needs. Continually increasing machine coating speeds together with these new coating colour components have put more emphasis on the importance of the correct rheology and water retention of the coating colours to achieve good runnability and end product quality. In the coating process, some penetration of the aqueous phase, to the base paper or board must occur to anchor the pre-coating to the base or the topcoat to the pre-coat. The aqueous phase acts as a vehicle not only for the binder, but also for the other components. If this water or material penetration is not controlled, there will be excessive material shift from the coating colour to the base, before immobilization of the coating colour will stop this migration. This can result in poor machine runnability, unstable system and uneven coating layer, impacting print quality. The performance of rheology modifiers or thickeners on the coating color have tended to be evaluated by the term, "water retention". This simple term is not sufficient to explain their performance changes during coating. In this paper we are introducing a new concept of "material retention", which takes note of the total composition of the coating colour material and therefore goes beyond the concept of only water retention. Controlled material retention leads to a more uniform z-directional distribution of coating colour components. The changes that can be made to z-directional uniformity will have positive effects on print quality as measured by surface strength, ink setting properties, print gloss, mottling tendency. Optical properties, such as light scattering, whiteness and light fastness delivery should also be improved. Additionally, controlled material retention minimizes changes to the coating colour with time in re-circulation giving less fluctuation in quality in the machine direction since it more closely resembles fresh coating for longer periods. Use of the material retention concept enables paper and board producers to have more stable runnability (i.e. lower process costs), improved end product quality (i.e. better performance of used chemicals) and/or optimized use of coating colour components (i.e. lower total formulation cost)

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.5
• /
• pp.582-590
• /
• 2004

The purpose of this study was to evaluate thermal properties of Taekwondo wears with three different materials. As a begging step, the questionnaire survey about the actual condition of Taekwondo wears was conducted. With the results of the questionnaire, cotton/nylon(70/30) blended fabric(CN) that was newly woven with sweat absorbent finishing and cotton/spandex(95/5) blended fabric with flexibility property were developed. The same designed 3 Taekwondo wears with 3 different materials which were two different materials(CN and CS) and a current material(cotton/PET, CP) were made. Four young males volunteered for this study, they kicked and punched as Taekwondo action for 20 minutes. Mean skin temperature was the highest in CS(33.1${\pm}$0.8$^{\circ}C$) and the lowest in CP(32.7${\pm}$0.6$^{\circ}C$). Increasing degree of rectal temperature didn't show any significant difference. Clothing microclimate temperature on the thigh was higher in CS(32.8${\pm}$17.4$^{\circ}C$) than in CN(29.4${\pm}$1.1$^{\circ}C$) and CP(29.4${\pm}$1.0$^{\circ}C$). Clothing microclimate temperature on the back and humidity on the thigh didn't show any significant differences. Clothing microclimate humidity on the back was higher in CP(65${\pm}$20%RH) than in CS(61${\pm}$17％RH). Heart rate, total body weight loss, and local sweating were not significantly different by materials. Most subject responded more hot in CN than in others, but there were no significant differences at the subjective sensation of thermal humidity. They answered more comfortable in CN than in others. Tectile sensations were the best in CN and the worst in CS. From those results, first of all, it is necessary to be weighted on Taekwondo wears made of CN in the aspects of the dignity of military arts uniform. Secondly, CS was required to be lighted and enhanced for the subjective sensation. Third, CP weaved honey comb was asked more various design to eliminate sweat high competition power within the scope of the dignity of military arts uniform.

• Journal of Life Science
• /
• v.33 no.9
• /
• pp.730-735
• /
• 2023

In the past decade, numerous studies have been carried out to quantify aging with the help of artificial intelligence. Using DNA methylation data, various models have been developed; these are commonly called epigenetic clocks. Epigenetic age acceleration is usually associated with disease conditions. Schizophrenia is a mental illness associated with severe mental and physical stress. This disease leads to high mortality and morbidity rates in young people compared with other psychological disorders. In the past, the research community considered this disease to be related to the accelerated aging hypothesis. In the current study, we wanted to investigate the epigenetic age acceleration changes in schizophrenia patients to obtain epigenetic insights into the disease. To measure the epigenetic age acceleration, we used two different DNA methylation clock models, namely, Horvath clock and Epi clock, as these are pan-tissue models. We utilized 450k array data compatible with both clocks. We found a slower epigenetic acceleration in the patients' samples when we used the Epi clock. We further analyzed the differentially methylated CpG sites between the control and cases and performed pathway enrichment analysis. We found that most of the CpGs are involved in neuronal processes.

• Journal of Environmental Science International
• /
• v.29 no.1
• /
• pp.69-77
• /
• 2020

Oxidative degradation of phenol, three monochlorophenols (2-chlorophenol, 2-CP; 3-chlorophenol, 3-CP; 4-chlorophenol, 4-CP), four dichlorophenols (2,3-dichlorophenol, 2,3-DCP; 2,4-dichlorophenol, 2,4-DCP; 2,5-dichlorophenol, 2,5-DCP; 2,6-dichlorophenol, 2,6-DCP), and two trichlorophenols (2,4,5-trichlorophenol, 2,4,5-TCP; 2,4,6-trichlorophenol, 2,4,6-TCP) was conducted with heat activated persulfate. As the number of chlorinations increased, the reaction rate also increased. The reaction rate was relatively well fitted to the zero-order kinetic model, rather than the pseudo-first order kinetic model for the reactions at 60 ℃, which can be explained by insufficient activation of the persulfate at 60 ℃, and the oxidation reaction of 2,4,6-TCP at 70 ℃ was relatively well fitted to the pseudo-first order kinetic model. The oxidation reaction rate generally increased with increase of persulfate concentration in the solution. 2,6-dichloro-2,5-cyclohexadiene-1,4-dione was found as a degradation product in a GC/MS analysis. This compound is a non-aromatic compound, and one chlorine was removed. This result is similar to the result of previous studies. The current study proved that heat activated persulfate activation could be an alternative remediation technology for phenol and chlorophenols in soil and groundwater.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.9
• /
• pp.1327-1334
• /
• 2015

The current study determined the apparent or standardized ileal digestibility of amino acids (AID or SID of AA) in growing pigs fed diets containing three protein feedstuffs with different fiber characteristics at two dietary crude protein (CP) levels. Twenty boars ($Yorkshire{\times}Landrace$) with average initial body weight of $35({\pm}2.6)kg$ were fitted with a simple T-cannula at the distal ileum. These pigs were offered six diets containing soybean meal (SBM), canola meal (CM) or corn distillers dried grains with solubles (corn-DDGS) that were either adequate (19%) or marginal (15%) in CP using a triplicated $6{\times}2$ Youden Square Design. Except for Met, Trp, Cys, and Pro, AID of AA was greater (p<0.05) in the SBM diet compared with the CM diet. Apparent ileal digestibility for Gly and Asp was greater (p<0.05) in the SBM diet compared with the corn-DDGS diet. The AID of Ile, Leu, Phe, Val, Ala, Tyr, and Asp was greater (p<0.05) in the corn-DDGS diet compared with the CM diet. Standardized ileal digestibility of AA was greater (p<0.05) in the SBM diet compared with the CM diet for all AA except Trp and Pro. The SID of Ile, Leu, Val, Ala, Tyr, and Asp was greater (p<0.05) in the corn-DDGS diet compared with the CM diet. It was concluded that protein feedstuff affects ileal AA digestibility and is closely related to dietary fiber characteristics, and a 4-percentage unit reduction in dietary CP had no effect on ileal AA digestibility in growing pigs.