• 천문학회보
• /
• 제37권2호
• /
• pp.235-235
• /
• 2012

The "Widefield ASKAP L-band Legacy All-sky Blind surveY" (WALLABY) is an extragalactic HI survey which aims to examine HI properties and large-scale distribution of ~500,000 galaxies out to z ~ 0.27, covering a wide range of science goals associated with galaxy formation and evolution (P.I.: B. Koribalski & L. Staveley-Smith). The combination of ASKAP's exquisite column density sensitivity and a large primary beam will make it possible to systematically investigate the rarely explored low column-density HI in the universe. Ultimately, the largest and most homogeneous data set from WALLABY will drastically improve and broaden our knowledge on galaxy formation and evolution. ASKAP will be on-line in 2013, so to ensure timely and efficient reduction and analysis of the large WALLABY data set, we have been developing and testing reliable source finding tools and data analysis pipelines. In this talk I present recent progress of WALLABY, especially on the kinematic parameterisation pipeline for the spatially resolved galaxies detected by WALLABY.

• 천문학회보
• /
• 제36권1호
• /
• pp.35.1-35.1
• /
• 2011

The solar X-ray telescopes, the Yohkoh SXT and the Hinode XRT, have observed for a couple of decades a variety of coronal structures in the range of wide field-of-view (FOV) covering the full solar disk. It has been emphasized that the optical structure of solar telescopes should be designed with care for improving the uniformity over the full FOV. The vignetting effect is one of the important optical characteristics for describing the performance of a telescope, which reflects the ability of collecting the incoming light at different locations and different photon energies. The correction of this vignetting effect would be an important calibration step that should be performed in advance, especially when the observed images are to be used for photometric purposes. Since the vignetting effect of solar X-ray telescopes shows wavelength dependence, a special care should be taken when, for example, performing the temperature analyses with thin and thick filters for flaring activities observed at the periphery of the full FOV. The results of analysis of pre-launch calibration data for the evaluation of vignetting effect will be introduced in detail.

• 한국안전학회지
• /
• 제26권4호
• /
• pp.27-33
• /
• 2011

Forensic Engineering is the area covering the investigation of products, structures that fail to perform or do not function as intended, causing personal injury or damage to property. To investigate explosion accident of the centrifugal casting machine in terms of the forensic engineering, in this paper, the computing simulation using ADINA FSI has performed to investigate that the effect of the Check-Pin fracture by the flow phenomena and molten metal weight and the mechanical properties test of the accident Check-Pin has performed using the instrumented indentation technique. Through these studies, the safety accident that may occur in centrifugal casting machine can be minimized by performing specialized and systematic investigation of the accident cause in terms of the forensic engineering.

• Journal of Photoscience
• /
• 제12권1호
• /
• pp.41-46
• /
• 2005

We synthesized chiral choleseric liquid crystalline monomer p-phenylene bis-(p-3-acryloxy-2(S)-methylpropoxy)benzoate (1) and achiral nematic liquid crystalline monomer, p-phenylene p-acryloxy-6-hexyloxy-p-octyloxybenzoate (2) for the construction of cholesteric polymer network with a pitch gradient. In this research we attempted to synthesize cholesteric polymer film which have a wide reflection bandwidth in the region of visible wavelength with the synthesized chiral cholesteric monomer 1 and nematic monomer 2 under various photopoly merization conditions. We succeeded to construct cholesteric polymer film network with a pitch gradient covering more than 200 nm bandwidth in the visible wavelength by diffusion controlled photostructuring method.

• Bulletin of the Korean Chemical Society
• /
• 제16권6호
• /
• pp.493-498
• /
• 1995

Ultrathin networks of itaconic acid copolymers and poly(allylamine) were produced by a Langmuir-Blodgett (LB) technique employing a double-chain amine as a monolayer template which was subsequently removed by extraction after thermal crosslinking. Itaconic acid copolymers used were copoly (itaconic acid-ethyl vinyl ether) and copoly (itaconic acid-n-butyl vinyl ether). The polyion-complexed monolayers of three components consisting of template amine, itaconic acid copolymer and poly (allylamine) were formed at the air-water interface. The Langmuir film properties have been studied by the surface pressure-area isotherm and fluorescence microscopy. The monolayers were transferred on solid substrates and were characterized by FT-IR spectroscopy, X-ray photoelectron spectroscopy, and scanning electron microscopy (SEM). Two-dimensional polymer networks were formed through imide or amide linkages by heat treatment under vacuum. The heat-treated films were extracted with chloroform after immersion in aq. sodium chloride to remove the template amines. SEM observation of a LB film on a porous fluorocarbon membrane filter with pore diameter of 0.1 μm showed covering of the pores by six layers in the polyion complex state.

• 한국자기학회지
• /
• 제5권5호
• /
• pp.687-689
• /
• 1995

Our team works on mixture of hard magnetic materials. As hard magnetic material we used mixture of powders: melt-spun ribbon Nd-Fe-B, ferrite and Alnico. Their different mixtures are basic material for dielectromagnets under our investigation. Main disadvantage of dielectromagnets with Nd-Fe-B alloy powder as a component is a low corrosion resistance. Protection against corrosion is covering dielectromagnets with metallic or organic coating film. The coating film protects dielectromagnets from free particles on the surface and low resistance for mechanical stresses too. The surface of dielectromagnets prepared from mixture of powders if formed by metallic particles - powder of Nd-Fe-B and Alnico, particles of oxide - powder of ferrite and particles of resin - bonding materials. Team work on technology of laying the metallic coating on dielectromagnets prepared from mixture of mentioned powders. Papers show the results of initial investigation on metallic coating technology. It shows influence of type and used technology of the metallic coating film on magnetic properties of dielectromagnets.

• Computers and Concrete
• /
• 제26권6호
• /
• pp.577-585
• /
• 2020

By the increasing amount of waste materials, it eventually dumped into the environment and covering a larger area of the landfill which cause several environmental pollution problems. The utilization of Palm Kernal Shell Ash (PKSA) in concrete might bring a great benefit in addressing both environmental and economic issues. This article investigates the effect of PKSA as a partial cement replacement of High Strength Concrete (HSC). Several concrete mixtures were prepared with different PKSA of 0%, 10%, 20%, and 30% replaced by the cement mass. This procedure was replicated twice for the two different target mean strengths of 40 MPa and 50 MPa. The mixtures were prepared to test different fresh and hardened properties of HSC including slump test, the compressive strength of 3, 7, 14, 28, and 90 days, flexural strength of 28-days, drying shrinkage, density measurement, and sorptivity. It was observed 10% PKSA replacement as optimum percentage which reduced the drying shrinkage, sorptivity, and density and improved the late-age compressive strength of concrete.

• 천문학회보
• /
• 제45권1호
• /
• pp.35.2-35.2
• /
• 2020

Submillimeter galaxies (SMGs) have played an important role in the understanding of galaxy evolution and cosmic star formation history at high redshift because they are known as being located at z ~ 2 and harbor a vigorous star formation. Therefore studying properties of SMGs can lead us to understand evolution of massive and actively star forming galaxies and distribution of cosmic star formation density. Recently we detected 548 SMGs near North Ecliptic Pole with JCMT/SCUBA-2 from the JCMT large program covering about 2 deg2 so far. To derive their physical parameters, we compiled a multi-wavelength photometry ranging from optical (0.3 ㎛) to submillimeter (850 ㎛) by cross-identifying counterparts at different wavelengths. In order to find counterparts, we used either VLA-1.4 GHz image and/or Spitzer/IRAC 3.6 ㎛, 4.5 ㎛ image. The number of SMGs with relatively robust counterparts is 349. In this talk, we present photometric redshifts, stellar mass, star formation rates, total infrared luminosity, and AGN fraction of these 349 SMGs derived through SED fitting analysis.

• 한국건설순환자원학회논문집
• /
• 제8권1호
• /
• pp.1-7
• /
• 2020

고로슬래그 미분말은 뛰어난 장기 강도와 염해 저항성 등을 바탕으로 활발히 사용되는 혼화재들 중 하나이다. 국내 규격(KSF 2563)은 저분말도 GGBFS를 가지고 있는 일본 및 영국의 규격과는 다르게 3종의 GGBFS가 모두 고분말도에 포함된다. 본 연구에서는 4,000급 고로슬래그 미분말와 플라이애시를 혼입한 수화열 저감용 삼성분계 배합과 3,000급 GGBFS를 혼입한 배합의 굳지 않은 콘크리트 특성, 압축 강도, 수축 특성을 분석하였다. 수화열 저감용 삼성분계 배합과 저분말도 고로슬래그 미분말을 혼입한 배합 간에 공기량과 슬럼프는 동일한 값을 나타내었으며 초결 및 종결 시간의 경우 20분 내외의 결과를 나타내어 큰 차이가 나타나지 않았다. 압축 강도와 수축 특성 분석에서 삼성분계 배합은 저분말도 GGBFS를 혼입한 배합보다 더 낮은 장기 강도와 높은 수축량을 나타내었다.

• 한국조경학회지
• /
• 제28권5호
• /
• pp.48-57
• /
• 2000

This paper is dealing with the fundamental properties of planting concrete, replacing the existing cover concrete on the roof of a building. This study is to find out the physical characteristics of the planting concrete and rearing characteristics of the grass throughout the modeling experimental materials. As the results of the experiment, the physical properties of planting concrete show the following results; when the paste to aggregate ratio is 0.2~ 0.4, voids volume : 30~17%, unit weight: 1,710~2,010kg/m3, compressive strength : 45~145kgf/$\textrm{cm}^2$, its pH is more than 11, but is reduced to the proper degree for planting after being neutralized. Kentucky bluegrass covered with planting concrete is grown well. The planting concrete used with blast furnace slag cement shows a better properties at the height, the width and the covering rate by 1.1cm, 0.5mm and 7%, respectively, than those used with ordinary portland cement. Also, the less the paste to aggregate ratio is, the better the plant grows. The orders of the effects of temperature control are as follows; the system of planting concrete with grass>the system of planting concrete without grass>the system of mixed soil>the existed roof system. In case, the planting concrete is placed to the roofs of buildings instead of normal concrete slab, and a number of favorable effect can be expected such as the improvement os environmental factors, the reduction of construction cost, the saving of energy and the reduction of environment load. The future research on the change of a variety of the aggregate conditions and the application of the practical structures should be made, and also the research of the endurance also be performed.