• Fashion & Textile Research Journal
• /
• v.11 no.4
• /
• pp.602-613
• /
• 2009

This study aims to improve the fit of middle and high school girls' uniforms. This study researched on the sizing system reflecting their body figures. The results are as follows. First, to classify the middle and high school girls' figures, factor analysis, and cluster analysis were conducted. 4 factors were extracted for upper body of the middle school girls, and 5 factors were extracted for the highschool girls. For the lower body, 3 factors were extracted for both the middle and high school girls. The middle school girls were then divided into 4 groups for the upper body and 4 groups for the lower body. The high school girls were divided into 4 upper and lower body groups. Third, KS size intervals were used for frequency distribution of height and bust for the bodice, height and waist for the lower body. Sizing system of the uniform company and the frequency distribution of sizes were compared. As a result, sizing system of the uniform company and the frequency distribution overlapped very little. Fourth, sizing system considering body type distribution and high frequency distribution of sizes was suggested. As a result when 6 sizes were suggested 30% of the population was covered, and when 11 sizes were suggested 55% of the population was covered.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.3
• /
• pp.335-344
• /
• 2000

The purpose of this study was to set up sizing system for knit trainning wears. Sample size was 198 females and their age range was from 15 to 24 years old. The body types for sizing system for knit trainning wears were divided by height and drop values. The results were as follows. 1. The height could be divided into three groups and they covered 97.5%. The Short(152cm) covered 27.8%, the Regular(160cm) 51.0% and the Tall(168cm) 18.7%. 2. The Medium hip(drop value 6) and the Large hip(drop value 12)had the high coverage rate of 45.5% and 46%, and the Small hip(drop value 0) had the low coverage rate of 8.6%. 3. For sizing system for knit trainning wears, the intervals of bust girth and hip girth were 5cm and 4cm. In the same size of bust girth, the intervals of hip high girth and waist girth were 1cm, the intervals of back waist length and sleeve length were 2cm and the interval of slacks length was 4∼5cm according to three height groups.

• Journal of computational fluids engineering
• /
• v.19 no.1
• /
• pp.41-46
• /
• 2014

The aerodynamic drag of high-speed train has been calculated and the effect of bogie side fairing on the aerodynamic drag has been investigated. Computational Fluid Dynamics (CFD) simulation based on steady-state 3 dimensional Navier-Stokes equation has been conducted employing FLUENT 12 and the aerodynamic model of HEMU-430x, the Korean next generation high-speed train under development has been built using GAMBIT 2.4.6. Three types of bogie side fairing configuration, the proto-type without fairing, half-covered fairing to avoid the interference with the bogie frame and full-covered fairing have been adopted to the train model to compare the drag reduction effects of the bogie side fairing configurations and the numerical results yields that the bogie side fairing can reduce the aerodynamic drag of the 6-car trainset up to 7.8%. The aerodynamic drag coefficient of each vehicle as well as the flow structures around the bogie system have also been examined to analyze the reason and mechanism of the drag reduction by bogie side fairing.

• Journal of Plant Biology
• /
• v.1 no.1
• /
• pp.17-24
• /
• 1958

The author investigated the plant sociological studies on the flora of Inchon districts coast area. (It contains also province of Buchun, Kumpo, and Hwasung, the island of Kanghwa.) The scenery of the west coast in Korea is very curious, because the soil in this area contains comapratively large amount of mud and small sand. Some parts of this area is covered with only mud, and the area between the line of high tije and line of low tide is very vast. When a low tide was appearel, there were vast moddel places appeared about 10 km in length. The author could distinguish $\varepsilon$ different types of communties in this zone. (1) Suaeda jatonica community (2) Statice japonica community (3) Scirtus triqueier community (4) Zoy_ia community (5) Phragmites community (6) Carex Pumilla community (7) Atriolex subsodata community (8) Rosa rugasa community (1), (2), (3), (4) communities can grow under the high tide. (When the high tide comes they soaked in the sea water.) (1) Suaeda community is the most popular type of the Yellow sea. It is very wonderful scene that the vast area (the length of 10 km) is covered with this Suaeda, and it looks like to be painted with blood. (2) Staice (3) Scirpus (4) Zoysia community is can fully maintain their glorious life in the sea water. It is due to the this plants tolerance of salt. (1), (2), (3), (4) communities are very strong to the tolerance of salt, especially the Suaeda is remarkable. The structure and some sucession I trend of each community were studied in detail and the mutual relations among the communites were also concluded.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.12 no.1
• /
• pp.667-679
• /
• 2020

As the LNG carrier operates in ice covered waters, it is key to ensure the overall safety, which is related to the coupling effect of ice-breaking process and internal liquid sloshing. This paper focuses on the sloshing simulation of the ice-breaking LNG carrier, and the numerical method is proposed using Circumferential Crack Method (CCM) and Volume of Vluid (VOF) with two main key factors (velocity νx and force Fx). The ship motion analysis is carried out by CCM when the ship navigates in the ice-covered waters with a constant propulsion power. The velocity νx is gained, which is the initial excitation condition for the calculation of internal sloshing force Fx. Then, the ship motion is modified based on iterative computations under the union action of ice-breaking force and liquid sloshing load. The sloshing simulation under the LNG tank is studied with the modified ship motion. Moreover, an ice-breaking LNG ship with three-leaf type tank is used for case study. The internal LNG sloshing is simulated with three different liquid heights, including free surface shape and sloshing pressure distribution at a given moment, pressure curves at monitoring points on the bulkhead. This present method is effective to solve the sloshing simulation during ice-breaking process, which could be a good reference for the design of the polar ice-breaking LNG carrier.

• International conference on construction engineering and project management
• /
• 2011.02a
• /
• pp.629-635
• /
• 2011

Retentions are generally considered to be intended to act as a powerful tool to incentivize contractors/subcontractors to remedy defective work in cases of non-performance. This study attempts to establish the extent to which retentions can be used for this purpose by investigating case law connected with insurance and defective work. One of the significant questions is whether retentions are sufficient to deal with construction defects or value of retentions in the rectification of defects is illusory. The cost to repair a defect may vary depending on a number of components including type, cause, magnitude and the construction stage at which the defect occurs. It is expected that a review of existing cases on defective workmanship will provide an insight on the issues and whether retentions are effective in their intended function. In order to establish their functionality, the study described in this paper investigated 6 construction insurance cases to identify the critical issues and the causes of dispute. It was found that the nature and the cause of defects were different in each case. It was also established that certain defect types not covered by insurance may be covered by retentions - potentially one of the key uses of a retention strategy. It is expected that the findings will assist in forming a view on the quantum of money that may be required paving the way for a first time understanding on a rational basis for setting up retention regime.

• Journal of Magnetics
• /
• v.3 no.2
• /
• pp.44-48
• /
• 1998

Scanning Electron Microscopy with Polarization Analysis (SEMPA) was used to image the surface magnetic domain structure of the 100 ${\mu}{\textrm}{m}$ thick 3% Si-Fe sheet. The thin-gauged 3% Si-Fe strips with magnetic induction ($B_{10}$) from 1.98 to 1.57 Tesla were prepared via conventional metallurgical processes including melting, hot-and cold-rolling, intermediate annealing and final annealing. Using SEMPA, it was observed that the $B_{10}$ (1.98 T) Tesla sample was almost composed of 180$^{\circ}$ stripe domains which are parallel to rolling direction. On the other hand the 3% Si-Fe sheet with $B_{10}$ (1.57 T) Tesla was composed of large 180$^{\circ}$stripe domains that are slanted about 30$^{\circ}$to the rolling direction and complex magnetic domain structures like tree and zigzag pattern. The 180$^{\circ}$stripe domains, which covered a major part of the sample, had (110)<001> Goss texture parallel to the rolling direction. The domain walls between 180$^{\circ}$stripe domains were the conventional Bloch type walls. On the other hand, the 90$^{\circ}$domains, which covered minor part on edge of the sample, were observed in (200) grains. The domain walls between 90$^{\circ}$domains were the Neel type walls. In high magnification, the elliptical singularity at the Neel walls was clearly observed.

• 한국HCI학회:학술대회논문집
• /
• 2008.02b
• /
• pp.405-410
• /
• 2008

There is always a rhythm in our language and speech. As soon as we speech out, even just simple words and voice we make are edited as various emotions and information. Through this process we succeed or fail in our communication, and it becomes a fun communication or a monotonous delivery. Even with the same music, impression of the play can be different according to each musician' s emotion and their understanding. We 'play' our language in the same way as that. However, I think, people are used to the variety, which is, in fact, the variation of a set format covered with hollow variety. People might have been living loosing or limiting their own creative way to express themselves by that hollow variety. SPACIAL POEM started from this point. This is a new type of 'real-time visual interaction' expressing our own creative narrative as real-time visual by playing a musical instrument which is an emotional human behavior. Producing many kinds of sound by playing musical instruments is the same behavior with which we express our emotions through. There are sensors on each hole on the surface of the musical instrument. When you play it, sensors recognize that you have covered the holes. All sensors are connected to a keyboard, which means your playing behavior becomes a typing action on the keyboard. And I programmed the visual of your words to spread out in a virtual 3D space when you play the musical instrument. The behavior when you blow the instrument, to make sounds, changes into the energy that makes you walk ahead continuously in a virtual space. I used a microphone sensor for this. After all by playing musical instrument, we get back the emotion we forgot so far, and my voice is expressed with my own visual language in virtual space.

• Journal of Environmental Impact Assessment
• /
• v.21 no.6
• /
• pp.903-916
• /
• 2012

We need to use aesthetic landscape assessment(ALA) as the means of riparian buffer zone(RBZ) management. This study verified the political validity of designation policy of RBZ and land purchase policy. The purpose of this study was to propose RBZ landscape management strategies through ALA of RBZ in Gyeongan Stream for the better attractive and healthy riparian landscapes. The natural type landscape units(LUs) covered 40.9% of the entire area and the cultivated land type LUs covered 20.58%. Landscape assessment consisted of landscape quality and landscape integration assessment. The criteria for assessing landscape quality(LQ) were naturalness, interest, uniqueness, and landscape function. LQ was ranked into five grades using a matrix. The landscape integration assessment consisted of an inner integration assessment in each LU and outer integration assessment among LUs. To review the propriety of designating the riparian area and the riparian ecological belt, differences in ecological appraisal and aesthetic valuation were reviewed through a t-test, Oneway ANOVA, and logistic analysis. The results of ALA, 29.15% of the entire area scored at grade 1 in LQ, while 31.95% scored at grade 5, indicating that grade 5 areas occupied a high share. Surveyed areas were divided into designated RBZ and undesignated RBZ. Results indicated that designated RBZ scored grade 1 in LQ took up 33.2% of the total, significantly higher than the 23.3% taken up by undesignated RBZ. When examined according to buffer distance, grade 1 areas within 50m took up 50.2% of the total area, lower than the 32.7% at buffer distances of 500m-1km. Results indicated a 1% statistically significant difference. Accordingly, analysis was undertaken for the expansion of designation of the riparian area and the selection of appropriate land for formation of a riparian ecological belt, and was designated at priority 1 and 2 for land purchase. This study can also contribute to the formation of a riverine eco-belt through discovery of design factors for upgrading the ecology, aesthetics, and landscape of the riparian area and application in determining land purchase priorities.

• The Korean Journal of Community Living Science
• /
• v.18 no.2
• /
• pp.277-291
• /
• 2007

The purpose of this study was to examine the costume worn by women in daily life according to life scenes depicted in genre paintings of the late Chosan Dynasty. The sentiments and customs of the time were examined to discover how costume culture followed women's lifestyles in the late period of the Chosun Dynasty. First, according to life scenes, a field amusement type costume was the most common garment and a commercial activity type costume was the least common garment. Second, when the form of costume was examined followed by the lifestyle it depicted, the following observations were noted. Women depicted in a housework type lifestyle often wore a Minjeogori. In contrast, women appearing in a labor production type or a commercial activity type lifestyle often wore a Banhoijangjeogori with the width of the coat narrowing gradually according to the trends of the time. In the forms of Chima, the women wore a Duluchima and a Gudlchima for convenience during their work and covered a Haengjuchima over it. Third, women shown in a field amusement type, a home enjoyment type or an affection pursuit type lifestyle mainly wore a deep blue colored Chima and Hoijang or Banhoijang Jeogori. While most of the women depicted in a labor production type, a housework type or a commercial activity type lifestyle wore a natural cotton colored Jeogori and a natural cotton colored and light indigo Chima. Fourth, in the field amusement type and the affection pursuit type lifestyle, the wearing of a headdress during outings of women appeared variously influenced by the strengthening restrictions placed on the women's lives according to the ethics of Confucianism.